Subwoofers / Speakers

Looking 2 18's zcon or xcon for an Chevy Avalanche. Will be powering by a mojo 4 with upgrade alt, two kinetic 1400 for now. Looking more for sq right now, in at least 13-14 cubes after displacement (slot port). The zcon's do have a lower a qts, xmax, and bl compared to xcon. But spl is slightly higher on the zcon. Later might try an quasi 6th order. Thanks in advance.

I've been watching videos of them for over a year but haven't heard one in real life, yet. Has anyone experienced one before? If so what did you think of the quality of music it reproduced?

Going through a local shop today they had these setting in the back with a generic label on them. The lady said it had some off brand subs in there.. with no info on them any idea? I know sundown I pulled both out the coils look good.. any idea which sun down? these were the best pics I could get also it was 170 for the pair.

HDC4 15.. Yes I know coil smell is not good at all but I am breaking these subs in with power now.. I first broke them in for a week with a nendo 2k at 20hz half power.. They are now on a CT sounds 7k. The amp is DD1'd and the subs bang really hard.. But I am smelling coil smell when i am at the DD1 max volume set. after a few minutes.. I back down the volume as soon as I smell it and have recently turned the gain down a bit more.. Just curious how long I will smell this during the subs break in period.. They are wired @1ohm also.. so I know I am not overpowering the subs at all.. There is barely 3k going to them.. Opinions?

Anyone ever run any PSI subs? If so what did you think? I've heard many many subs but never a PSI.

I was wondering do any one know if the Crescendo PWX s come with grills and what are some other mid range speakers that are good that have them (i have kids)

Looking for a company to get a 12"sub magnetized. Purchased a Orion xtrpro around 4 years ago an the magnet somehow never got magnetized.

a coworker has an old Eclipse TI pro 15" 1500/3000 sub that has a torn surround. its torn about 1/2 way around the diamiter of the sub, does anyone know where to get a recone OR surround for this sub?

I been doing a little reading on fourths, and I think I want one lol. My question is how much space would two sundown x15's need for a fourth order?

Well guys, I pulled the trigger on a 15" ZCON last night. Here in the next few months, I hope to pair it with a nice 3500, give it plenty of airspace, and tune to about 30 hz to see what she can do. The Evil may or may not have been a better choice for the amp/tuning combination, but I got a great deal on this driver. I'm sure she'll do nothing less than blow me away come time for install. I'm talking to my box designer now, we're trying to decide whether to do a standard enclosure or seal off the trunk. Either way, I'm totally stoked to start running SSA.

Hello everyone, new to the forum and looking for a few thoughts or ideas. i have a brand new FI Q12 basic sub that sounds horrible in my opinion. I have had my hand in car audio for 15 years or so and this sub is driving me insane. its installed in a 2004 ram 1500 hemi and powered by a new kicker zx1500.1 in a box around 1.25 i know thats just outside the sub requirments. the speaker sounds as if its bottoming out or not getting the needed power, plenty of movement but no sound at high volume. low volume (scale of 1-20 lets say 10) the bass is clean 18-19 bottom out sound little bass 2-4" flex. i have a rockford p3d12 powered by a kivker 1500.1 in another ram it slam…

I currently have 2 Sundown E-12s in the Trunk (Dual 4ohm) wired down to 1ohm on the amplifier. (1700rms at 1ohm) I am going to pick up my old Kicker CVR10s (Dual 2ohm) and put them in my backseats... Is there ANY way I can hook up the 2 10s to the amplifier for added bass? It would only be for a day or so, but just for fun. I just want to know how I should wire the 2 10s to get the most out of my amp. Thank you!

So after having my sub for 3 weeks the suspension is gone on it . It is a DC Audio Level 3, i had it in a 3.4ft^3 box tuned to 32HZ running less than rated clean power to it (used a DD1). It never over heated to the point I could smell the coil but today it started bottoming out and i took it out of the box and could bottom it out with one finger. Did i do something wrong or was this a manufacturer error?

Stopped at an audio shop in central MN and was very impressed with the Arc Audio Black series. Its a 2 way passive component set with a 6.5" mid, a 1" tweeter, and passive crossovers, I'm planning on running it active since i have an 80PRS. Anyway the guy was quoting me a price of $670 l(could hopefully talk him down a bit) Its cheaper than what I've seen the for new online. I'm hoping to hear personal reviews of these being installed. I have the 80PRS for a HU and a RF T8004 to power the component set. The mid will be installed in factory location and the tweeter will be installed in the door, right above the mid. If anyone has questions or comments please them below.

Hello everyone I've had the zcons for a few weeks now I got 2 18" zcons on a sundown 5000d my build log is in the build log forum if your interested but the zcons are pretty great so far I plan to mess with the amp a little today I haven't had much time to lately but as of right now these things are crazy loud but they are slightly peaky but that might be more to do with the box design than the subs here is a status I seen the other day after I gave some friends a demo

So I had my system down for two days.One to upgrade my power wires and grounds.2had to get ruffles out of my speaker box the bag got pulled in an destroyed them chips every damn where lol.but anyway during this time I noticed the 6x9's sound like ass.like the cones were busted I haven't looked.just wondering if pressure in the trunk may be able to do this?

Hello all, I'm in the process of designing a box for my 99 grand Marquis. One zv4 15 d1 running of a bc3500 @2 ohm for now, until I get a new alternator soon, then will do.5 ohm. The two options I have with the space available would be 3.5 cubes net with 60"port volume and 36.5"length. This would give me ~32 hertz...I think. Or 3.75 cubes net with 38.5" port length to give me ~30 hertz. So my question is, if I go with the bigger box with the lower tuning, will I lose allot of output in the top end? The sub will be firing up with the port firing back. I also cut out behind the arm rest and took the speakers out rear deck to let more air flow Through

I have 2 PWX8 4 ohm and 2 FT1 4 ohm and a Hifonics BRX640.4 which is rated at 4 x 80 RMS @ 4 ohm or 4 x 160 RMS @ 2 ohm. Should I run each speaker to their own channel or should I run one tweeter and one speaker in parallel @ 2 ohm 160 watts?

I found this today I don't know how close it is to the real book Figured this would help a lot of post I've seen over the months including some of mine lol remove if this isn't ok

Haven't had a sound system all winter and I'm ichin to get back into the game. I'm gonna be picking up my 10" d2ohm XCON pretty soon and since I haven't done a 10" build yet I was lookin for some ideas/pics/thoughts and or some nice build logs featuring a ported 10. I think imma do sub and port up leaning towards sq. Supper pumped to be back....its been too long

So, I recently purchased a set of ID X65 and XS28 to run active. Got everything installed and working correctly yesterday and today one of the tweeters just stopped dead in it's tracks. I'd say about an hour of play time. I tested the driver for continuity and got nothing so it's definitely the tweeter that failed. I am running a RF T400-4 with the tweeters on front channels and the mids on the rears. I set gains with a DD-1 to the 0db track and all pass for xover on the amp. I crossed the tweets at 2.5k with 24db slope to start with. I am using the network mode on my pioneer 80prs for xover duty. Was this just a faulty unit? Or am I doing something wrong? Any help is app…

Hello all, I've been a motorcycle rider for 3 years, and am finally joining the cage crew. So, to get straight to the point, I believe an XCON will satisfy my desires. I want a sub that hits low and hard. "SQL" with heavy focus on the L. So, I have no idea what i'd need to run this setup. By this I mean big three, HO alternator etc, i'm not sure what i'm looking at. I don't really have a price range since I've been saving for a while (well, let's just say $2,000 so it doesn't get crazy), my main issue is space. I drive a 2013 Ford Focus Titanium, so I don't exactly have a huge trunk. Something I've discovered though is the spare tired is loca…

So I have installed a set of Sundown-cs6.5 and running off a ppi 900.4 in my car and have found that the tweeters are almost too harsh. From what I have read this is a characteristic of this style. I have made adjustments to my current amplifier and have not found a way to help with this. Looking for advice on helping me tune these in. Or if there are other options some help in a direction it would be appreciated. very new to this i have just been tuning with my ear. I also understand everyone hears differently before M5 starts bashing me for this.

Was goofing off on Fleabay, and saw these...14,000 for some 6.5 comps and a 400w amp? WOW! They do have a used set for only 8K. http://www.ebay.com/itm/Critical-MASS-audiophile-6-5-inch-complete-Front-Stage-Amplified-System-CM654a-/321336314419?pt=Car_Speakers&hash=item4ad1230a33 Can they really be that much better? I think it is funny that they state 400w rms but pair them to 100w/channel amp. Makes these 5.000 dollar Morel's look like walmart speakers! (not knocking Walmart speakers- I have a set in my burb.lol) http://www.ebay.com/itm/MOREL-SUPREMO-602-6-5-2-WAY-CAR-AUDIO-COMPONENT-MIDS-TWEETERS-SPEAKERS-NEW-/400605811874?pt=Car_Speakers&hash=item5d4…

Ok I have an 06 Scion xB. Not much room in the back for a box. I currently have a Sundown Audio Nightshade v1 and a Sundown Audio 1500v1. I would like to change systems and hopefully get a little louder. I will be going with top of line equipment. IE Digital Designs, Sundown, or PSI. What is everyone's opinion on what I should go with?