Subwoofers / Speakers

My choices are a Fi ufo BTL 18D2 for 250 shipped, or a dc level 6 18 with enclosure, for 800. Is the dc a good value? I simply want loud as fuck. Which would you choose, and why? I don't know which is better for what i'm looking for; obscene low end. I am focusing on these two, because they are both purchases from friends, trying to help them out, as well as help my sound situation

I need to find a negative push terminal... The original wearer of said broken terminal was a diamond d1, I am not worried about it matching, unless Scott, or when I call heather at TC sounds will only sell them in sets. I snapped the terminal right off of the basket, but they are more of a bolt through design than actually being part of the basket.

Since my RCA pictures and speaker wire comments pretty much started a fire last time, here is the official thread to either put up or shut up. I will send out a 20 foot piece of Omni speaker CABLE (no interconnects like I have, as they are just too expensive to send out like that). Twenty feet is more than enough to swap out one side of a stereo with. What I advise doing is only putting this wire on one side of your system, whether it be car or home, and take a listen to the difference. Reply to this topic only if you wish to be on the demo list. I will pay for shipping to a person, and then when that person gets the wire they pay shipping to the next person, and so-on a…

Can i use 2 1/2 dry wall screws to mount my sub in the box? Does it matter what line driver you use? Last question, will any RCA's work, if there cheap or not?

so, as the title states i am looking to put together my own set of components. i found this silver flute mid that looks like it has a great flat response in the vocal ranges. does anyone think this thing will perform as its specs show? seems to good to be true for somthing of this price.and it will be paired with a sb acoustics tweeter crossed over at 2500 hz.(second order crossover) https://www.madisound.com/store/product_info.php?products_id=846

I can't get a lot of info and no reviews for this pro audio speaker i guess because it's new... I currently have a sundown 100.4 and a set of ID components rated for 100wrms per side. I want to bridge my components to the sundown 100.4 but i'm sure it will kill them due to too much power.. Question is- If i purchase these pyle pro PNDW6 6.5s, where do i look at replacing my current crossover with a new one so i dont burn it up due to too much power. I looked on partsexpress but it looks like u have to finish building them, i'm looking for already built ones.

hello. i`m thinking about the box and not sure what size ports would be oki. i got everything from 6" to 14" tubes with nice flares to use.. there`s about 16cuft total for the box (-spacesaver..18cuft max) they say, but have to calculate myself.. i just got the car.. they say also bigger the better (on music) but i would say it gotta stop sometime.. anyone got 3 of these 15" thingys in a wall, or in a car at all...? could be fun to see what others have done.. the amps not found yet, but guess around 1,5 @12V on each..btw, is that enough to do music oki, and somtimes spl....? almost forgot, the car is a ford...: (random car/pic from web, but exactly the same car..) th…

Hello everyone, i have two sets of 6.5 in. speakers im using as midbass in my s-10 pickup, im putting one speaker in the factory location and putting the other in Q-forms, has any body done this before, and how does this sound, then i am using some infinity 4x6 plate speakers in the factory location on top of the dash, the 6.5 will be crossed over at 60hrtz, then the infinity plates around 400 hrtz, has anyone heard a setup like this?I will have (4) q15s subwoofers in the box of the truck with a blow through to the cab, well i was just wondering what u all think about this setup, ty, brian

I recently purchased 2 10" q10 and wanted to know what would be the best box for them to fit in a 2012 ram quad cab

here are some quick pics of the tc9 that I reconed with an FI Q coil. new coil is dual 1.4's and three stiff spiders

Suggestions? I'm not really sure what I want to do. I was thinking along the lines of one 1000w or better per coil if the price is right. Full wall or half wall, I'm not sure yet but it will not be a trunk car and that's for damn sure. I can get batteries and alts etc not worried about that part. I've been checking into custom fabricated drivers but I'm not sure this particular person can make a 4000w+ quad coil. No particular reason for the quad coils or four amps.. just have a thing for the number four. Its even and featured on the common dice..

I got 2 Funkin Audio MF12G2 12"s and one is working fine reads 3.6 Ohms the other is reading nothing. It has a very wired way they get wired I can post a diagram here if needed. But the bottom line is I wired them both up the same one worked one is not. Any idea on who could fix one of these as they are no longer around. Could I just use it's motor and basket and recone it with FI BTL soft parts or someone elses and switch it to dual 2 ohms? If anyone can do this please let me know what would need to be done..

(2x) Quad L5 Kickers in a 24cu.ft @ 18Hz, For Stage use. Could use L7 or Solo X! Oh yeah, No SoloX in 15" size. But for the L5 with 3,000w@2-ohm x2 with Peavey IPR 6000. Talking weight here so will be rolling Quad Subs. Let me know whats on your mind good or bad.

Hey guys im just wondering are there any quad stacked magnet subs out there? Im just curious and im sure other people are too.

Need to find a set of 12 that have the same sound performance of a Kicker L7 and about the same price +/- 50 dollars. Cant do PowerBase because the shop where I live drop their line. Most of the music I listen to is Screw and chopped and no Mike Jones!

Got a new truck (2004.f250 king ranch) and am ditching the factory 6x8s and 6.5s but need some guidance on what to get. Dont want Jls or kickers.. if been looking at ground zero stuff but cant seem to find anywhere to buy any. Dont want to break the bank!

I have been learning of some new brands as I have been on here. Let me rephrase, I have learned of brands I have never even heard of before. So in this light I thought maybe peps would give a shout out to all the quality brands they have ever had or heard of because I fell so left out, here in the sticks.

I think the saying "you get what you pay for" is true. That bein said would it be wiser to get a better quality 10" sub or a lesser quality 15" sub? Or is that just a favor of difference in a punchy 10 or versatile 15?

Looking for max bang for buck amp will probably be a Cadence zrs c-9 100x4 rms ebay(139.00)or diamond d6 115x4 (229.00) arc 12 ssa dcon diamond d3 jl 10w3v2 any other suggestions

can someone tell me the general frequency ranges for each speaker or is it personal preference? thanks guys -tweeter -midrange -midbass -subwoofer

Okay so, I'm getting this gcon 15 and i always here my uncle nem talking about the 15 and the surface are of the the cone and the area of space in the car and stuff like that but what does it all mean i dont understand. like he says his 2 18 xcons would be perfect in my van because of the room for the sound but can someone explain to me what that means?

Okay so i'm designing my box for the 2nd Gcon 15'' and i'm thinking about going with 10^3ft box and i wanna know what a recommended tuning for it would be and how i would measure the port hole. Recommended was between 28-33hz and the recommended optimal ported was 4.00-6.00ft cubed per sub. let me know

What would be the ideal place to put my sub in my van? Right behind my seat facing the back doors or turned around facing me i think i'm going to have the box sealed im not sure yet.

Question is, can I run 3 18” ZCON on 2 ampere 5k???

I have a 91 Acura Integra, and I'm gonna throw 2x 18" XL's in there on a SAZ-3000D or a SAZ-3500D @ 1 ohm... Finally got the numbers together, and have an enclosure designed with interchangeable ports (one is 33hz and the other one is 37 hz.... I was only able to get so much airspace out of my integra, but came up with 12ft3 with the 33hz port and 13.24ft3 with the 37hz port.... and thats NET, after sub displacement, bracing displacement, and port displacement.... My question is this.... I'm new to the "wall" thing, but I'm definitely doing it....and I want to know if it matters if the port is on the top or on the bottom (behind my head or towards my lower back?)..... If …