Subwoofers / Speakers

Hi guys, what's the highest number (TL)you've seen with 4x RE SE 12" ported playing music? and if you know, what was the tuning freq and power? thanks.

I'm looking for a 12" sq sub in the 500-600w range. I haven't been keeping up, but I seem to remember reading that RE products have gone down in quality. I know the IDQ is an all time favorite. Anything else fit the bill?

Well right now I am gonna get either 2 Fi BL or 2 ICONS. They will be wired to 1ohm off my soundstream pca2000d. But in the future i will be getting a zx2500.1. On the kicker site it rates it a 2500 rms at 2 ohms. Are the kicker amps one ohm stable? Cause if i get dual 1's to run off my soundstream amp at 1 ohm then when i upgrade to my kicker amp and not be able to wire them to 2 ohm then i got a problem. I was thinking though if i just got Dual 2's and just ran them off the soundstream amp at 2 ohms for 1500 watts then just be set for when i get the kicker amp. Or can will i be able to wire dual 1's to 2ohms off the kicker?

What are a good 6.5 mid by SEAS and where can i purchase SEA's in general?

As most of you may know, the BM's are going ultra-shallow! Ultra-shallow being 3.5" for a 12" model. The new BM will be offered in a 12" only with dual 4 Ohm coils. Enclosure sizes are 0.75 cubes sealed and 1.5 cubes ported. Power handling will be 500 watts RMS. That's all the information I'll let out for now, but here is a picture of the basket we are going to use (and before anyone asks, this may or may not be the color of the basket )

I have a 98' maxima and want to put the two 10s in a ported box tuned at 28hz. i was thinking this design would be pretty cool and different from a standard square box. this is a top view of the design. thanks to MS Paint

I've become interested in getting a pair of these but couldn't find the power handling of these anywhere. Does anyone know what their RMS power is? Thanks

I just purchased a pair of SEAS tweets and was wondering if I wrapped them with grill cloth over the metal mesh grill if this would affect the sound.

I am loving how this sub sounds. Its pretty decently loud and I have my gains turned a hair.. I have dual 2 coils the dcr registered in @ 1.8 on my dmm I have the sub wired down to 1 ohm on my Saz-1500d here is a few pics of the the sub after the recone. Thanks Scott for the recone.

my car has stock 5.25" speakers in the doors and i really wanna KISS on the front stage, with a 2-way. of course i will be deadening and sealing my doors as much as possible, but right now, i dont wanna spend too much on the mids 70 per will probably be the max for me. I have the seas neo metal version sitting here next to me and a set of aa poly mids. the only problem i think will be the fact the stock grill will ONLY fit a 5.25 speaker and i don't want any bad reflections off the inside of the door panel. I wanna HP the mids over ideally around 80hz, but if i must go to 100 i must. For the amps, i will have an Usamps md42 bridged at 180x2 @ 4 ohms so power should…

I was looking on your site, I see the mpyre comp set, but the links down. DO you still carry the 6.5 mpyre comp set. ANd if so what do they cost. Thanks, Joe. P

Been doing a bunch of reading and looking for a smaller sub for my car. For the past three years or so, my RLp 15 handled the bass duties, and now I'm itching for a change. It's a great sub, but I want to step down to a 12 or a solid 10. So far I've looked into the Fi Q, Diyma 12, Hertz Hi Energy (I LOVE the Mille, but it's out of my budget, my cousin has a Mille 12...sweet sub), IDQ's, and the Rainbow Profi. So far I'm leaning towards the Hertz. Any other subs you guys have in mind that I can look into? I sort of regret selling my old Brahma 12 MKII. That was a nice sub.

I'm a total front stage noob. Literally. But, I'm really thinking of new things that I can do to my truck to improve its front stage. It doesn't particularly matter to me whether it is a component set or set of speakers that are to be run in an active setup. I happen to like airy and not harsh tweeters, a smooth midrange, and a strong midbass presence. I'm open to any and all suggestions. Thanks, Brandon

As far as Fi subs are concerned should I run 3 10" SSDs or 2 10" Qs. Will the SSDs handle 600w rms no problem. Especially if I upgraded the SSD 3 10" Qs are a No cause of my budget I noticed that the Q is desgined to work in smaller enclosures than the SSD?

I have a 07 GMC sierra crew cab so air space is limited. I think I may be able to fit 3 10s or atleast 2 not so deep 12s I love hard hitting bass and a good ass rumble. I listen to alot of fast rock and r&b I was thinking about going with Fi subs But what kind of amp should I get? Something that will run 1ohm stable? Id like to throw about 1,500+ watts to the subs

I bought an older 12" claw mag from someone in mint condition. I already made a box, I just need to know what diameter to make the cutout. I tried searching, I can't find it please help!

so i have my maw 15 in a sealed box 2.7cuft and was wanting to port it this is the largest box i can fit in my reg cab pickup does anyone no what size port to sue thanx in advance

What is the RMS for these 4inch tweeters. Site says 220 but just making sure if its rms.

w/out getting into the high dollar range, are components worth the harder install over co/tri axial speakers? I'm getting my lows (sub) squared away now, I got the Avic D3 head unit, so now it's time for speakers. Currently, I got the stock bose and I'm not sure if I've heard a worse 'premium' set up. I'm going to say I have about $200 to work with for speakers

I'm looking for a 12'' subwoofer to work well in a .7 to 1 cuft enclosure before speaker displacements. Getting about 1000RMS. I listen to a lot of 80% rap and 20% rock and possibly some techno here and there. I was aiming for a Fi Q 12 but i was told that there are subs around that work really well in small sealed enclosures. I want it to be as loud as possible. I also have had a RE SX 12 in a .6 sealed box after displacements. It did really well and sounded clean but it got pretty warm. I'm just exploring my options. Any feedback on woofers is greatly appreciated! Thanks

anybody know where I can get an 18" RE XXX for trade?

ive been wanting the BL for some time now but i think im goin to wait untill springfor a system . but i think i want to throw the alpines in the picture. which set ups will most likely get louder and sound somewhat better with the same power (1.5kw) and which would u choose for a first system?? ive also looked at MAC.com and saw there hellboy and crossover box and the crossover box caught my attention.are these boxes any good?? if so why? thanks

Hey all, I'm new here, was wondering if i could get some friendly advice. Im lookin at getting my first system in a few weeks for my '01 taurus, and i cant decide whether to get the type r 12 or a fi q 15...i know it would be a big difference...but i dont know if the Q would be an overkill and more bass than i want, not to mention take up way more of my trunk ..i can get the Q from a guy on caraudio.com for 240 shipped...or the R for like 130 from sonicelectronix.com, should i spend the extra $110? would probably be giving either around 1000w..any advice/sugestions?

Ok guys thanks for any help ahead of time. I'm lookin into a 18 BTL but would like your suggestions on speakers.

Some of this was already posted on audiojunkies.com, but I'm posting it here because this is SI's forum and those who don't visit audiojunkies need to know about our news. All of our reps know this info, and they have kept their mouths shut because I asked them to. But now they can divulge anything they want (within reason). Ok, well I guess I should get the biggest thing out of the way and say that the new Mag is going to be 5.5" deep. I'm putting the motor inside a completely new basket on the new Mag's to reduce mounting depth to 5.5". I'm also using XBL^2 to get a super-flat BL curve and maintain our T/S's over the entire band of usable Xmax, which will make the d…