Subwoofers / Speakers

Hey just have to say this forum is awesome. I have been thinking about trying to make my own driver to put in a transmission line box. I could not find any places that sell parts to build your own driver. I

Any great enclosure builders on this forum? A need a 3.5^ft tuned to 28hz for a Mag D2 15". Can someone build a quality box & carpeted for under $200 shipped?

ok i have 2 12 inch subs i think they are assasins they are all black no writing on them no nothing on them the are singl voice coil any help is great thanks

sounds dumb i know... but what would be louder? 2 15" Kicker L7's or 1 18" BTL. im working with very little space and all being stuck with strict parents who want the spare tire to stay in the trunk of my jimmy so i have about 6.5 cubes at most. thats barely enough for either selection. either way i go i will make sure they have a good amp going to it and sufficent electrical. im just currious for what i have to work with, what would bang harder. im going with a ported box obviously. i REALLY want a BTL after seeing the amount of output these things do. i like my L7's aswell. im just curious and kind of new to this. Never heard a BTL before so im not sure how to compare i…

hey, just wanted some input as to shipping these solo x 18s.... i was thinking on doing something very simular to ssa shipping ( plywood on top and bottom, 2x4s on each side) inside of a big cardboard box. what do u guys think? dont tell me there gonna be alott$$ to ship.. i know this lol buyers have agreed to pay full shipping

I'm guessing it is vehicle dependent, but when you all are trying to plan out your enclosures. How do you all map out your graph on winisd if you even look at that. Say I was trying to build a box for my xcon that is not here yet and I wanted to build a box that was great for metal, but I still wanted a bump in the low end. What would your graphs look like, sealed or ported?

I want to go passive over active right now because active seems way more expensive considering that this will be my first component build. But, how do I get good mids and tweets to sound good with the crossovers? JimJ said that these crossovers won't work too well? Amp: Crunch PowerZone 4-Channel Amplifier (PZi175.4). Sub: Dayton RSS265HF-4 10" Reference HF Subwoofer 4 Ohm 350w RMS. Tweets: Morel MDT-12 1-1/8" Neodymium Tweeter 80w Mids: Dayton Classic DC130-8 6" 50w Crossover: Dayton XO2W-3K 2-Way Crossover 3,000 Hz Another question, will this ^ sound better than this: Pioneer Components, TS-C160R

http://www.onlinecarstereo.com/CarAudio/Pr...owAll=True& I need some tweeters that fit the same as the 07 type r comp tweeters, because I custom fit my door pod for them, and then one blew. My dad is buying some 6x9's off this site, so I want to order mine with his to save on shipping!

Okay so i am getting a new system and i have few questions. 1. Why would i want 2 ohm subs over 1 ohm? 2. If i run 2 Subs to a mono amp what ohm do i want the subs to be? 3. Does everyone use both voice coils of subs? Whats the difference between using 1 and 2 coils. Thanks, Drake

I’m new to the forum so sorry if this is not the right place to ask. I have a 2013 Silverado crew cab and I know under the backseat is my only choice without doing a custom Center console my question is what subs will really hit or single sub my budget is 1,000$ for my whole system and I will be doing all my own installation and I have all my door speakers already so I need head unit sub or subs box and amp and wiring kit and I wasn’t going to do any sound proofing just yet I know I’m asking a lot but I just really wanna know can this truck really bang with the downfiring or upfiring setup and if so any help with the box would be great

I had a account here a while ago, but I guess it got deleted, wierd . But getting to the point, Ive had a 12" Mag still in its original packaging sitting under my bed for a few months now and its about time I got in a box. There were a few options I was looking at, I) 3.5 ft^3 at 32 hz II) 1.3 ft^3 sealed Looking for lowend output, hard slamming bass Probably gonna give it 600-800 watts, due to stock electrical system. Thanks for your input.

I have a few pics just called D2. Is this a Stereo Integrity D2?

how many of you guys actually give your components there suggested rms or under? and how many of you over power them? i was thinking around another 50 watts over suggested rms wouldnt kill them would it?

Ive heard these are very very nice for the price, Trying to find a good Component set up for under 250$ shipped. Any suggestions or input will help a lot. Amp: Profile 440 Truck: 1986 2 door S10 Blazer Thanks

Pioneer 9900 headunit,sundown 100.4, peerless hds tweets, looking for a 7 inch mid that can run up to 1600. Would the sea nextels be my best bet? I may want more midbass if i could.

so.. got home from work yesterday, found these waiting for me mli's. going to be used in a 3 way component set:D got a hell of a price on them new from mark:) great guy. cant wait to try em out.

I have 2 MTX subs and one of them is about to go out the door and blow. I have a RF 501 BD amp 500RMS@ 2ohms and a 3.4cubic foot ported enclosure for the subs. So i need 2 subs that are SVC4 or DVC2. I'm trying to keep this rather cheap but just tell me what subs would work well off about 250 rms each. Of course i prefer spl over sq but dont want the subs to sound ugly. My friend has cvrs and i want mine to sound better than those if possible, but still get loud. Suggestions: ???

I am trying to put a system in my Ford F350 Super Duty 4 door and i am wanting to take out the center console but i dont know if i can get the speakers i want and a box to work where it is at. I am wanting to put 2 skar ivx 15 inch subwoofers in there. The space i have is 16 inches wide by 15inches tall by 32 inches long. Any help will be greatly appreciated Thanks

Hey guys i really need someone to help me design a box. If you can help me please repost of send me a personal message. Thanks Guys

Alright well I am about to put it in the box and I know I have to drill the surround so I can drill the screws in there. Should I remove that sticker on the bottom of the sub? And are there any specific ways to drill it? Is there anything else I should do when putting it in the box?

what is the recommended box tuning and size for one 15?

I've been looking to upgrade to either 2 12 SA's or 2 Lethal Injections. Ill be powering either set with a Sundown Sae 1200 v2 and will build an enclosure to specifications. I know it'll probably just come down to brand preference since both are quality subwoofers. So basically I'd just like to hear other peoples input because I havent heard any sundown or ia subs. Thanks in advance, looking forward to trying something new.

can anyone email me a Win Isd file for a 15 inch and 12 inch magnum at [email protected] please. and can you tell me if WinIsd is accurate wth magnums. i know with the ED A series subs it seems to be off. im using pro alpha edition. thanks

I finally built my box ! (4 sq. ft vented to 28 hz) and 1500 brutus for the 15" SI. Problem is....I NEED THE SUB NOW! Whats the deal SI!! its the middle of june!

I was just wondering how much different the 2004 models L7 to the newer ones. how much louder they are if they they sound better stuff like that.