Subwoofers / Speakers

I have decided the Sundown Audio SA series is what im going for. I need the best setup for what im doing but im not an expert, thats why I came here. The car: (not yet purchased) A new (or recently new) Dodge Charger My ideas: 2 SA-15s, 2 SA-12s, or 3 SA-10s (The 3 SA-10s are the last option on my list but il keep them in mind) The power: All off of a 1200 or 1500 RMS amp (I will have no other modifacations so I need to keep the power down) I bump daily, im careful about feeding to much power and i take care of my subs. I want SQ but im mainly going for SPL when i need it. What setup is best for me? Any questions about this just ask. I am unsure if I will port or go se…

Hello everyone, I'm trying to repair my AA Mayhem 12. My leads broke in the middle of the spiders and I'm not sure how to get to them so I can solder them. Does anyone know how to disassemble a Mayhem or got a video on how to do it? Or does anyone know an easy way to get at the leads? Thank you, Brad.

I just got my SI mag D2 15" from wedge, and boy it looks so hot. i cant wait to install it, (just gotta sell my old stuff to get a new HU) it is a badass looking sub (much better looking than my SX) love the basket, i dont think pictures do it justice. how much dose this thing weight? i would like to thank everyone that listend to me ask all sorts of questions about it (ibander lol)

Hello everyone. I was wondering if anyone out there could help me find a manufaturer that can rebuild a subwoofer based off an Audiomobile Mass series magnet structure. It is a 3inch underhung design that was origonally built or at least designed by TC Sounds. The design was also used in the SVS Ultra(v1) home subwoofer. TC as some of you may know has been restructured and are far to busy to handle this request. I was just wondering if there are any other products/manufaturers that would be compatible. Any input is welcome. Thanks.

Thanks jay-cee

which setup would hit harder and sound better all around, two rl-p 12"s or one rl-p 15"? also what would be a good amp to power the sub(s)? thanks!

A mid made by CIARE (Italian company) for Car Audio. They have a bunch of products home and car... even horns like ID but I don't know what they are worth. http://oaudio.de/media/products/0861656001182438423.pdf I was thinking of pairing those with my ID CD1v.3 horns for a 2way front stage. The new version has pretty much the same specs except for the Fs = 75hz // Re = 3ohm // Qts = 0.16 // Qes = 0.16 // Qms = 4.88 // Mms = 13.19. Your opinion appreciated, Kelvin

but when i push on the cone or surround it works again, i'm pretty sure it has something to with the spider monkey or whatever but i'm not sure thanks

im getting ready to slowly upgrade to a 3-way diy setup. i got midbass and tweets and i wanna make midbass in 2-way setup just the lows like 80-500 and then get a very nice midrange . partly becuase i wnana amke my kickpannels smaller and get a driver with nice off axis responce. my limit is around 50 per speaker and i want 4-5.5 inch through other forums ive limited down to these 2 but they arent helping me much decide which of these 2 i should get. VIFA P13WH-00 5" WOOFER http://www.partsexpress.com/pe/pshowdetl.c...r=297-302&DID=7 AUDAX HM100C0 4" CARBON FIBER WOOFER http://www.partsexpress.com/pe/pshowdetl.c...tnumber=296-053 im really not expecting low end from…

I've been looking to upgrade to either 2 12 SA's or 2 Lethal Injections. Ill be powering either set with a Sundown Sae 1200 v2 and will build an enclosure to specifications. I know it'll probably just come down to brand preference since both are quality subwoofers. So basically I'd just like to hear other peoples input because I havent heard any sundown or ia subs. Thanks in advance, looking forward to trying something new.

I purchased an old btl 12, and im looking to get a new btl 12? Can i use these two subs together?>

does anyone have these? do they sound good? is this a good deal? http://cgi.ebay.com/ws/ebayISAPI.dll?ViewI...bayphotohosting im deciding whether or not to buy these 2 12's for my 92 explorer. thanks.

hey guys, i came across a AQ hdc3 15 in a sealed box on my local CL for $100. i was wanting a sub for my old mustang so it this worth $100? there $275 new from AQ.....

I want to go passive over active right now because active seems way more expensive considering that this will be my first component build. But, how do I get good mids and tweets to sound good with the crossovers? JimJ said that these crossovers won't work too well? Amp: Crunch PowerZone 4-Channel Amplifier (PZi175.4). Sub: Dayton RSS265HF-4 10" Reference HF Subwoofer 4 Ohm 350w RMS. Tweets: Morel MDT-12 1-1/8" Neodymium Tweeter 80w Mids: Dayton Classic DC130-8 6" 50w Crossover: Dayton XO2W-3K 2-Way Crossover 3,000 Hz Another question, will this ^ sound better than this: Pioneer Components, TS-C160R

I was thinking of using my current Mag15 in a HT setup once I get my new Mag in. Unless I sell this one first. How do you think it would do? I assume it would kick ass, especially considering the sq. I have also read where people usually double the box size when doing a HT install. Is this neccasary? Or would 4-5cuft ported still do?

hey guys been lurking for a while and have yet to post. been interested in mach five for a while but have never used there product. how do you guys think a mj18 in 3.5 net sealed with polyfill on about 5-600 watts will perform. car is a 95 s14

noticed the LFB2K is available in 16V, and I need a couple 16V batts for an upcoming show. Just wondering what the lead time is on them, I'm kind of in a time crunch.

can anyone email me a Win Isd file for a 15 inch and 12 inch magnum at [email protected] please. and can you tell me if WinIsd is accurate wth magnums. i know with the ED A series subs it seems to be off. im using pro alpha edition. thanks

I need help finding out what sub or subs I should be putting in my car. I have a camaro, and I am able to put a 5 cubic ft box in my car and I currently dont have much power as an amp. 750 bridged at 4 ohm. The RF 500/2 Where I work I get discounts on Alpine's and RF. Thats why I am currently running 1 12" P3 in 2.5 cubic ft. sealed box. I was orignally going to put two P3's or 2 Type R's in but from what I have heard from you guys thats not the way I wanna go. I am on a limited budget of 500 bucks unless I can sell my old school memphis 500D amp and my Rockford.(I hate being a poor college student lol) I am after some clean bass. Not so much spl...even though I like ev…

Hello, and thanks in advance for your answers or comments! . ok. i have an older style fi btl 18 fully loaded. i blew it. i have it taken apart and the ring where the foam lip is located is completely clean. 1st question. 1. what is the best method to remove the leftovers from where the spiders were. ( about 1/4 inch of spider and alot of glue) i tried to use a dremel tool but it made bad odors that i didnt think would be good to breath in. i also tried a metal brush in my drill "was going VERY slow" and a knife didnt work well either 2. what type of glue do you use when you recone and is it something i can pick up at any hardware store? 3. is this something not to har…

Well, after about 2 months of my 12" SI Magnum sitting in a box in the corner of the living room, i got around to building a box and getting it in the car. This sub is replacing my 3 10" Orion XTR's in a 3.1 ft^3 sealed box, some pretty big shoes to fill. The box about 1.3 ft^3 net, sealed, and stuffed about 50% with a mix of fiberglass insulation and cotton stuffing. The amp is an Orion XTRPRO 1000, running at 1 ohm for a full 1k output. Well, first impression. Wow, this thing is tight!! I listen to metal about %99.9 of the time so this was a big deal to me. This sub sounds flawless. I went through about 10 CD's, from Fear Factory to Lamb of God, and it has handl…

Somewhat on the way, I just ordered it today. It's too bad the lead time is so long. I installed an Icon last summer in a buddies car so I can't wait to see what the Xcon is like. Positive feedback is encouraged I haven't had a sub in my truck for over 2 years!!!

ok, well i'm looking into getting two new Mags possibly but know that the upgrade process will take a little time due to money. I have a concept CC-D1200 that at 1ohm does somewhere from 1200-1400RMS and at 2ohms does 900-1100RMS. So for one sub i know i'm fine but when i get the second one i'll have to be at 2ohms and didn't know if 450-550RMS is too little for them. i would hope that i will add a 2nd amp to them but I may be replacing the concept amp at the same time. Will i run into underpowering issues if run at 450RMS? It will be in a sealed 1.5cu ft per sub box.

I have a set of 8 Ohm Solo Baric subs I am looking to run on a Mono Amp. I used to have a set of Solo's that were 4 ohm that I ran on a US 1000x. Can't remember what the setup was but I know I had a neg from one sub running to pos to the other sub, then one terminal pos going to the pos on amp and neg going to the amp. Is that just a bridge Mono? Would that have been at 1 ohm? My question is, If I do that on my 8 ohm subs what Ohm rating will I be at. and also what is the exact wiring configuration. I am having an extremely hard time finding a US 1000x amp. I am considering running a JL500/1 does anyone have any other amps they like, I am going towards a SQ setu…

Man, i really had my heart set on sellings my two magnum 12s and getting two of the 15s. Those theives piss me off. Anyways, since there is no telling when stereo integrity will get back on their feet, i need a sub/subs that will work off my Tsunami 1800. I want them to perform (spl wise) like two 15" D2s would. And i will be tuning the subs low, so i can hit the real low lows. I just dont know what to get. 18inch XXX was an option, but i dont know if it will give me the SPL i was lookin for. What ever the case, it must hit harder than my dual Mag 12s. Please help me out as soon as possible