Subwoofers / Speakers

the 302's are one of the component sets im lookin at, just have a few questions. whats the mounting depth on them? and i think i remember reading somewhere that it said the 302's need custom kickpanels and such, is this true? or will they go into my stock kickpanels i have a 1990 bmw 325is so the stock locations are down in the kickpanels but they arent angled they are flush with the side. thanks, nick edit: where it says 302 i mean 307.

im working on a stealth install. so hewres my situation, the way im doing my doors is im taking off the carpet, mounting the speaker and puting the capret back over. it was designed for midbass aplicatuions becuase carpet shouldnt harm like 80-300 herts to much but hows it going to effect the upper midrange of the 302's if i buy them>?

this is to do with the comps (307) how low does the 5.25 go. and what you guys are useing for the gap from the 307 to your subs... i seen one guy with the peerless midbass in his doors of his 97 camaro, which model are they.... thanks jamie

how are these subwoofers in terms of SQ/SPL i know that focal is more of a SQ speaker rather than SPL but i was wondering how 2 of these would sound with about 500 watts running to each sub. Also, what kind of box would you put these in? Ported or Sealed One more thing, what kind of amp would you run to power these I was looking at the PG Xenon 1200.1, or the RE 12.1, if you have any other reccomendations let me know Thanks in advance!

Just playing around with my 1st TL experiment. It's ghetto, but sounds terifik for what it is. I have a cheap Walmart Regent HT-391 surround sound. I dropped the 5.25" subwoofer into a 5.5" cardboard tube I snagged from work 8'6" long. I believe that makes a 33Hz 1/4 wave. Once upon a time I had a TP roll glued to the cone for added mass experiments, so I tore it off so the black paper coating came off a little. I can't believe how loud and low the rear of the tube is VS how loud the driver end is... I wish I could do an 18' 22" pipe in my car for an IB3 22"! The camera is bad, sounds really distorted, but it's actually very clean and clear. I didn't do the 1/3rd-1/5 wa…

I was on the forums awhile ago and got some great help designing a box from a member (can't remember who). Just wanted to show what he helped me do. I have 3 SSA DCON 12's in a 1999 Chevy Tahoe. I just metered on a TermLab and the results were great. I have had this system in for over a year and this is the first time I have had it metered. Thanks again for the help from the build... http://i1241.photobucket.com/albums/gg506/eddielong1975/376572_532111330147364_1694144002_n_zpsfdfeacd5.jpg http://i1241.photobucket.com/albums/gg506/eddielong1975/218079_532113020147195_1480755921_n_zps062b6a97.jpg http://i1241.photobucket.com/albums/gg506/eddielong1975/DSCF1556_zpsc40a…

I'm thinking about buying 2 of these subs, any opinions on them? What are they comparable too? Im getting them for only $200 a peice, they will be replacing 2 06 l7's. http://www.adleraudio.com/web/mdl/3XL-12D/detail.asp

well ive done a little more since these pics and vids but the set up is 4 10 inch level 3s with level 4 coils and an extra spider box is 3.9 at 34 with 71 inchs of port amps are 2 ap30001Ds running at 2 ohm to the subs ( 6k ) electrical is 2 red tops in the back and stock up front 140 amp alt 2 runs of 1 gauge to the back and 0 gauge to the amps all stuffed into the trunk of a 1994 chevy cavilier! pics... an excursion vid ( only on 2000rms as i didnt have my 2nd amp then) and some numbers the 145.8 was sealed up at 42 hz and the 148.1 was with drivers door open the subs take the power surprisingly well havent smelt burning vc yet eather!

Aside from the 2 15" subs having the cone area advantage... Why would it be better to have 2 15"s over 4 10"s.....

As of now i have an AQ2200 and 2 12 Type R's.. I cannot decide if i want to get 2 more type r's or sell the current type r's and buy 2 15'' HDC3s(copper) If i was to get the HDC3 i'd buy another AQ2200, but if i was to get 2 more type r's i would just use the 1 AQ2200 I alrdy know im going to need more batts with the 2 AQ2200 then i would with 1 AQ2200 and possibly a bigger alt. Dont think about budget when picking between the 2 choises Thanks Dom.

would 4 Hifonics HFX12D4 ported @ 30hz on a 1500d be louder than my 2 skar 12's on the same amp in a wagon.

i have a 95 jimmy, with 2 cvr 15's and 1 sae 1200dv2. i am wanting 2 other choices for CHEAP spl, i will be buying another sae 1200dv2, db electrical 220a alt and couple kinetic batts, to TRY keep voltage around 14v to achieve around 1500rms each amp. and i also dont want my back seat to go down. the choices are, 4 AQ SDC2.5 12s -- 4 L5 solo-b 12's i know i gotta be careful with the barics, and they sound like , but i want loudest possible for best price. i want 4 12s. also either of the new setups (4 12s and extra amp) will definitely be louder than my cvr 15's right?

I managed to get my hands on 4 old school Rockford Fosgate 12" Punch Z's yesterday in about a 4ft^3 sealed box for 30$ and a pre-fab sealed box for 2 15's... Just for kicks and giggles, I put this setup in the trunk of my Grand Am hooked to a 1000w memphis amp. Drove up the street playing "I'm Raw" by Lil Wayne, turned the bass knob up, and just about S*** myself. I was absolutely blown away by the performance of these things! They don't look like they could blow the dust off of the dustcap.. but looks obviously aren't everything. For 30$, I'd say I've found myself a great temporary daily setup until I order my Z15. I'll record a video saturday while I'm off work to show …

After throwing my original plan around for 4 18 inch bl's I decided I just don't want everything to be packed in so tight. I need some room. So I have a question..... Either 4 fi bl 15's or 2 btl 18's. Either setup will be powered by 2 hifonics 2608d's. Help is appreciated.

Well im bored and im going to start a new job soon, so naturally i must start a new project... The Car Anyways i'd end up taking the back seats out, doing a fiberglass sealed enclosure, for the mags at a slant fireing back, and probably do some sort of compartment were the rear seats are for 2 extra batteries, along with w.e. else i need, i'll end up pulling the floor up in the back also, if i really wanted to im sure the is enough space to go ported or if i wanted im sure i can have all the subs fireing back instead of at a slant towards the back, I was thinking the new focal 3-way series for a front stage or the CDT ES 3-way's also I was thinking a 250a alt should be …

i am just trying to get a idea which ones i want to choose. which ever one i choose will be in 4 cubes tuned around 30-35 with a AQ 3500d running them. which one would have more potenial to get low? thank you for you input

So I have pretty much decided that I am going to choose 1 of 2 things.. I have 4 Memphis Mojo 15s right now and I am either going to a) do a third row wall or b) buy two DD9518g's The reason for the third row wall is because I don't have enough space for my batteries and amps with a traditional box right now because my truck isn't that big. What do you guys think? Keep the 4 or sell them off and go with 2 18s?

So i was thinking of selling my 21 warden and goin with a new setup. I thought either 2 18s, 4 15s, or 6 12s but im thinkin 4 15s would be cheaper than the 12s and louder than the 2 18s. I have a 2003 trailblazer and i want to wall it at c pillar while keeping my back seats. I currently have a Crescendo bc2k wired to .5 ohm and i want 4 D4s so i can wire to 2 ohms when i get another bc2k. Id like to put 3k rms to all 4 when all set and done. The thing i need help with is deciding which subs would fit me best. I listen to rap/ hip hop mostly but also country and dance music too. I would want the tuning to be around 34hz. I have around $700 to play with but id go more if i …

well...okay decided not to fire them down...got my 4 mj 18's today so hopefully all goes well i should be going deaf in no time

im just about ready to pull the trigger on a Focus Hatch and im really debating putting 4 18" MJ's in it (sealed). ive been wanting an SQ leaning S Q L setup for a while. The enclosure however would have to have 2 of the 18's firing up and 2 firing down. Does anyone know if this style enclsosure would even work? im not too framiliar with wave cancellation and other technical aspects but im just trying to get a feel if this idea is plausible. its this same concept however I would be building the box myself: http://cgi.ebay.com/4-HOLE-10-CHAMBERED-CO...1QQcmdZViewItem ALSO ive searched just about every MJ 18 thread on the forum and im still trying to get more feedback on ho…

these may be the subs i run when i get to the point i can afford them ... what would sound better ....at the most i have 25 cubes

im pretty sure that i want to go with infinity kappa speakers to match my 463.7 front speakers that sound AWESOME. right now i have a plate made for 4 4's that i have 4 proaudio speakers in it, that sound alright, but 2 of them are blown. so im probably either going with 2 693.7i kappa 6x9s, or 4 42.7i kappa 4's. im kind of leaning towards the 4's sounding better, what do you all think?

I have a Regular cab dodge... I have narrowed down to 2 options 4 sundown E 8's off a sundown 1000 or 1 12" Fi BL off a sundown 1200 Looking for LOUD SOUND QUALITY This will be going with a active setup with hertz hsk 165's, alpine 9887 and a sundown 100.4 What would you guys recommend? 1 12'' or 4 8's

4 8" sa-8 on a 2ft^3 tuned to 32hz on 1500 watts or 2 10" aa chaos in 2ft^3 tuned to 32 on 1500, Just want to know if it is worth to buy 8s

I was wondering if anyone had any input on this matter So I have a single 15" xcon that I can barely fit into my trunk, it's a 2005 grand prix. I've built two boxes for it and both of them will not fit smooth in the trunk. Meaning I tried to get the optimal box volume for the sub and it wouldn't fit unless I put the top plate on after it was in the trunk. Not a good idea when trying to remove it. So I was thinking of maybe trying 4 8 inch subs. I just wanted to hear if any one had any thoughts of the output comparison. Will the output be somewhat close to the 15, will it have a completely different sound. I've never heard 4 8s so I have no idea how it will sound