Subwoofers / Speakers

what would the suggestion be for 2 type r 12's on a sundown sae-1000d for LSQ? i have them in a 4.5 cube box tuned to 32hz and i dont like it at all. my box is subs and port up in a 05 impreza wagon. any ideas would be great.

planning a sealed box for a 18" rl-p, and i want this thing to be solid. first things first, im gonna resin it. should i do the entire inside, or just the edges? i was thinking mainly the edges to give it a nice tite seal. can i use resin instead of caulk? or should i caulk first, then resin? 2nd, instead of using a 2x baffle, i was thinking about bracing it. i saw this bracing thing from bcae: http://www.bcae1.com/spboxnew2.htm and was going to stick 2 of those in the box. (dims are 42x12.5x18.75) also maybe add some polyfill. the box + the bracing and displacement is going to be around 4.18 cubic ft w/o the fill thanks in advance

I am upgrading my power on this sub from a Viper 1200, which already got it loud as piss, to a US Amps 07 model Merlin MD3D for daily street beating. How will the sub take the power? I have heard that in this power range in when the sub will really come to life. This won't be too much for daily will it? And what kind of increase in output can I expect? I know it may seem like a dumb question but any respones are welcome.

I am curious about the Fi subwoofers. I have never heard them in person. I was planning on getting the JL W6V2 however I see that a LOT of people own Fi subs on this board. I can see that they are cheaper but are they actually better than JL? Another sub I was looking at was the Orion HCCA 12.4. I am going for SQ mainly however there are times when I want to really rip things apart with that bass. Thanks in advance for the help

My Dad's Ford Expo's Mach Audio subwoofer stopped working. I will be removing the stock 8" subwoofer and need some help finding a suitable replacement for the stock enclosure. The only sub I've found so far that meets the requirements is the MTX Thunder4500 8" : http://www.crutchfield.com/S-BPWdxhzxcW8/c...;i=236T4508#Tab And the spec requirements are: # 8" 4-ohm subwoofer # power range: 80-100 watts RMS (b/c stock amp is rated ~85rms) # sensitivity: 86.6 dB # top-mount depth: 3-3/4" (most important) THANKS!

I need some help I just bought a 1500d and would like to run it at 1ohm but I only want 1 sub. 1 12 or 15 that I can run sealed that can take 1500wrms. I still want a good sounding sub. I know about the TC 3000 but would like some other choices please. Dont want to spend more then 350. Thanks for your help. Mike J. Thinking about a Icon 15 but dont want to blow it.

here are some quick pics of the tc9 that I reconed with an FI Q coil. new coil is dual 1.4's and three stiff spiders

I got my MAW-10 today and noticed the box said impedance 2+2 ohm... I thought all Maw-10s are Dual 4?

ok ive got a rf t10001bd that does 1633 watts rms at 1 oh and 1110 at 2 ohm. i also have a 2.5 cubic ft per side ported box tuned to 35-38 hz. the subs i have now are rf's t112d4. one of them blew for supposively no aparent reason at all so i replaced it. now the other one blew and yet again no reason. so i was thinking of switching brands. i have heard about the fi's, and just wondering what ones to really look at. i was thinkin the bl or the q series. im mostly spl but want it to sound good too. and if i do end up getting some, what ohm load should i get? and how would i wire them to 1ohm or above? Thanks.

I really am interested in buying some maw15's but I would need them to be dual 2's or single 4 ohm. Would this be a possibility?

Mark, I was just wandering if your SPL 10 or 12 is getting close to production? thanks

According to SI's Mag webpage, the current one (Well, most current) is the fourth version. I know about the "Claw" Mag, and the (most) current Mag D2, but what are the other two versions? So how can I tell if I have the fourth generation Mag and not the third? And to the best of my knoledge, the Claw can't be paired with the Mag that's out, and both of them can't be paired with a triple stacked Mag that's coming out. Does the other two versions work with any of these mentioned. Also, Now that the new triple stacked Mag is making it's debut soon, what are we going to call the one that's out now? The first Mag is the Claw Mag, and the new one will be the new Mag. So wh…

Well, i recently traded my MX for a mag d2 12" and i was wondering if it could take an saz 1500d daily with no problems? I also had a question about if one mag is gonna be enough. I had two mx's and they were too powerful, but it would be nice to have sime headroom sometime. I was just wonderin what you guys think. thanks

Wanted to get some opinions out there.. Which would you guys go with, 2 12w6v2's sealed or 1 12 Magnum ported? Either application would be powered by a Sundown 1500d. Looking for SQ and have decent output.

hey, posting this up for future reference for people that might need the info i have an old 12" claw basket mag and the surround is torn on it. i am wondering: 1- is it possible to get a recone on it? or do you guys only do the new subs 2- if it is possible, is it possible to keep the same look of the old mag? or would it look like the new ones after the recone? 3 -and how much would a recone cost thanks

http://www.sundownaudio.com/misc/Two_Mags_1500D.AVI I was testing a used amp going out to a customer and decided it would be fun to take a video. And yes... I beat on the Mags like that every time I test an amp

I am ordering 2 Maw-15's and I heard that the U.S. Amps XT2000D is a good amp to push them with. so I was wondering If I could get a deal on the subs with the amp? As a package deal. Thanks in Advance. ~MadroX

k well im getting 2 maw-15's and jw how many watts they can take.. i know they are rated for 500 but wat should i run them at daily with my earthquake phd5000 amp.. how hard do most ppl push them? would 600 daily b fine? wats the most you would say i should run them daily? wat if i go 2 a comp and im just runnin them for a couple min.? how many watts then?

I'm really thinking of ordering up a couple of Level 4 subs for my cousins and I, but I am curious as to what you guys recommend as spec boxes as far as Volume/Port Area/Tuning? Thanks in advance! ALOHA FROM HAWAII, SKY

Sorry it`s a JBL sub - But I do not have any MAG 12" Yet... Anyway this will give you a good idea of what an ISO set up does. The following text is taken from my Forum: -------------------------------------------------------------------------------------------------------------------------- O.K. Get ready because you are about to see one of the worse looking installs ever. I`ve not bothered doing anything special because my boot space is regularly taken up with power tools / tools / bags of sand etc. So there you go. No point in having a nice looking install that will get messed up within a few weeks. Anyway what I did today whilst at work was... ...add another 12" JB…

I have an RE SR 15" that I acquired in a trade on CA.com and I was wondering if I could put ~400-~500WRMS safely to it, with out burning up the coils? It's a 2.65Ft^3 box tuned to 35Hz, and I was thinking it would get a little louder off of 300WRMS than what it did.

Ive got 2 10 inch kicker comps....from around 1995 In a box...30 x 12 x 12 I know the box is small...and sealed but i wanna get some 10 that get low and loud...not looking to spend more than 350 for a pair..i was gonna use the box till i got the cash to build a ported one for the subs Fi SSD TC Sounds OEM10 Kicker CVX Alpine Type R 10 http://sonicelectronix.com/item_9235...S-W2501D4.html http://sonicelectronix.com/item_7210...0W3v2D2+-.html http://www.onlinecarstereo.com/CarAu...roductID=16852 http://www.woofersetc.com/index.cfm?...t=account_name http://www.woofersetc.com/index.cfm?...roduct_ID=3504 those are some others about a week ago...i was set on 2 mach5 maw15s...b…

Does anyone know what this sub is. I have somebody looking to sell it to me but we don't know what it its. \ And yes it is a 10".

how much will it cost to get two of the maw 15's shipped to Wasilla Alaska 99654

The 15s are AUDIOBHAN FLAME EXCURSION SERIES and are 650rms singal 4ohm. Trying to cum up with a box to put in the back of a mini van, there site dose not have the rec. air space, so im guessing around 4 (ft3) for the both of them with a tuning of say 35 ish for her day to day driver. This is not for me, a manager at my work place requested me to do this job for her. YAA or NAA