Subwoofers / Speakers
Discuss Subwoofers And All Aspects Of Speakers here.
6,865 topics in this forum
-
I have a soundqubed hdc3 18 and I cannot find the serial number on it. I have looked all over the sub and also tried to search online for where it is, Does anybody know where it is located?
-
0
Reputation Points
- 1 reply
- 1.7k views
-
-
Hello everyone, I was using the search button, but I didn't come up with a solid answer. I'm hoping someone here can help me out. I'm looking for the recommend box size for 1 orphan sealed. I've read from other post that said the orphan are about the same as the SA-8 and likes the sealed box size of .17^3ft. I've also read a post from mike, that It needed .2 to .5^3ft, but I'm not sure if it was the recommended for seal or port. I actually wanted to try out they type of boxes and see which one sounds better to me. I do want to to try to make a passive radiator box, which I believe these subs were intended for. Here is the info from another post on this forum. T/S Parame…
-
0
Reputation Points
- 10 replies
- 1.3k views
-
-
Hey I have done a lot of research and have heard that the soundsplinter RL-Ps are amazing for both sound quality and sheer power. I am looking for a setup that will bump and will be heard by people outside of the car, yet will still have good sq. I do not want it to bump so much so that my head is going to hurt after 10 minutes though. I was thinking possibly 2 12 Rl-Ps, but didnt know if those would be too loud for what I am looking for. Maybe even 1 15 Rl-P would work too. I would also like to know which type of box would work well with these subs? What type of amplifier would work well with these different setups? Again I want a system that can have some serious power …
-
0
Reputation Points
- 8 replies
- 1.5k views
-
-
My RL-S 12" arrives tuesday. I made a post on ca.com which I asked for a design for 2-3 cu. ft. and everyone replied saying I need a much larger box. Although, SS and SSA recomends 2 cu ft minimum and 2.5 optimal. Does anyone happen to know what the smallest cu. ft. box I can put this driver in for good results? Not looking for a perfect response curve, just something decent.
-
0
Reputation Points
- 9 replies
- 1.4k views
-
-
Hey at other forums i have been told to get a Rl-p15 powered by a Hifonics Brutus amp. I was wondering how 2 Alpine Type R 12s would compare to one Rl-p15? Any help?
-
0
Reputation Points
- 14 replies
- 1.3k views
-
-
How do these compare SQ and SPL wise?? I'm waiting to hear from a guy about a used RL-i 12" but also there's a local Treo dealer who said he'd sell me a TSX 12"D2 for $150 new w/3 yr warranty. It seems the 2 are fairly close in rms power, the SS being from 300-500 rms (I think) and the Treo being around 400rms (claimed it's underrated)... I imagine that both have more than adequate sound quality, but what about output? Any experience w/the Treo line? The dealer mentioned how the Treo is a 'unique design that makes it louder than it should be', take that for what you will. I'm limited on power (~300-400w rms) so I just want to make the most of what I buy and have some…
-
0
Reputation Points
- 0 replies
- 821 views
-
-
Soundstream TRC.60C 6.5" 250W Tarantula Component System. it will be going i the front dord of my trailblazer with a old bo bo american bass amp not sure of the watts. what do yall think of them and has any one used them. there on the 1800 website.
-
0
Reputation Points
- 9 replies
- 1.1k views
-
-
Ok I know soundstream use to make some alright products years ago, but what about now? Are they any good. I'm looking for components. I seen a pair of Soundstream PCC.6 N for pretty cheap. And the PCX2.350 to power them. Do you think this setup would be any good? PCC.6 N-- http://soundstream.com/components-picasso.htm PCX2.350-- http://soundstream.com/amplifiers-picasso.htm
-
0
Reputation Points
- 0 replies
- 703 views
-
-
I just ordered a set of soundstream components and dash speakers I am wondering what experience some of yall may have had with them and if they are any good I found them for a good price and I am using them to replace my factory speakers you cant hear them at all over my 6x9s and woofers
-
0
Reputation Points
- 0 replies
- 621 views
-
-
have any of you used this pro audio speaker i have 2 and cant wait two use them
-
0
Reputation Points
- 2 replies
- 656 views
-
-
http://www.soundstream.com/subwoofers-ri.htm Look very interesting. Wouldn't mind listening to some, and maybe seeing what their pricetage is.
-
0
Reputation Points
- 5 replies
- 724 views
-
-
Well I am pretty sure I have made up my mind and just wanted to know what you guys thouht of the SS RF-60C speakers. I have been reading decent reviews and found them for about 175$ shipped. Are they worth it? Also how much power should I amp these speakers with? is there a key like don't go over 25% max rms for amplifying or something? http://techronics.com/caraudio_9003_Soundstream-RF-60C-Reference-6-5-inch-Component-Car-Audio-Speakers.html
-
0
Reputation Points
- 10 replies
- 2.8k views
-
-
im looking at buying two soundstream splx 12's to put in a wall with a t10001bd to each sub. so has anyone use these subs before? i used to have 2 soundstream t415's and i love them.
-
0
Reputation Points
- 1 reply
- 934 views
-
-
I ask because I had messed a little with the older SPL's and the Mules, I have not heard the SPLX, also I am not sure where in their line up it is placed and if it was designed before or after the power acoustic buy out or if was developed by the remaining old SoundStream guys ? here is a picture of it: B)
-
0
Reputation Points
- 3 replies
- 783 views
-
-
Hello What do you guys think about the Soundstream(T4) 10" 12" 15"?
-
0
Reputation Points
- 3 replies
- 1.4k views
-
-
Have any of you guys heard them? How do they sound in terms of SQ or are they just geared towards getting loud? I read some reviews but they were from ppl that are running them. I wanted to get a larger unbias populations opinion. Thanks
-
0
Reputation Points
- 4 replies
- 761 views
-
-
ive got to make a choice between these two components, which 1 is better? i want it loud n good sq
-
0
Reputation Points
- 5 replies
- 829 views
-
-
so i was bored today and was looking around a came across this sub a soundstrem xxx 18 inch ill post the link but it says 10000 watts rms is that true i mean seriously. take a look. http://www.woofersetc.com/p7740/XXX18--Soundstream-18"-XXX-Subwoofer.htm
-
0
Reputation Points
- 11 replies
- 3.8k views
-
-
Hey guys, I was looking at getting two of these and installing them in a blow through enclosure. I was wondering if any of you have had personal experience with them. What type of enclosure, volume, frequency? Also would an two orion 2500D's get the job done? Im not a competitor I just really like to slam my sounds. I love the low end pain and all input would be greatly appreciated.
-
0
Reputation Points
- 3 replies
- 923 views
-
-
I'm working on trading for a soundstream xxx 15. It still has the tarantula on the dust cap, so I'm assuming it hasn't been reconed. Were there any different versions? Are they all made by TC. Anything I need to look at besides measuring the coils, checking the color of the coil, and checking for any mechanical noise?
-
0
Reputation Points
- 3 replies
- 1.3k views
-
-
Hi all, A friend of mine has just blown its XXX 18" for the second time ! He doesn't know why ! The first time, he knew he had a very small box with a slot port, and he did not know the tuning of the box. He was playinf at full tilt with no ssf on ! Amp is a MTX te 4000. He has several batteries, and the big 3 done, now. I ordered a recone kit for him from PAP. They sent a kit for a 15" sub, and then the right one. (So I have free kit at home, looking for a sub !). After a few weeks, he was really satisfied, but on the 21st this month (it was music day in France) he told me he blown it again. This time the wire that runs on the spider has gone into smoke. The sub is a DVC…
-
1
Reputation Points
- 39 replies
- 6.8k views
-
-
Came across a great deal on a pair of XXX's........now don't know what to do!! I will be using a DD Z1 for daily and weekend competitions.... Which would you choose and why???
-
0
Reputation Points
- 3 replies
- 1.2k views
-
-
There seems to be a lot of different recommendations for port area size for the sp4 anywhere from 120-160. For the box I recently built the specs, are 7 cubic ft tuned to 31hz with 150inches of port. The port is double baffled with 45s in the corners, ill post some pictures in a bit. How do you think a fully loaded Fi sp4 18 will do in this box? I haven't designed too many boxes so I hope it is completely right. Also to note ill be running it on a crescendo 3500.
-
1
Reputation Points
- 35 replies
- 7k views
-
-
how far does the port of your sub box need to be away from the back gate of my suv? the box would be subs up port back,thats the way my current box is setup and i have about 6" between. the new box im planning may be a lot closer,just want to know if there is a poit that is to close and affect my sound.
-
2
Reputation Points
- 8 replies
- 1.3k views
- 1 follower
-
-
Hi all, I am looking for any information possible regarding a setup for my vw golf. I am looking to replace front indoor speakers and add some new ones to the rear doors (if suggested of course). I am also looking for a subwoofer to place in a box in the boot, one or two depending again on suggestions. I have no real experience with them in any way so any information is really appreciated. I have no experience of what amplifiers would be needed either or how to wire a system up. The music i am aiming my setup at will be mainly rock and metal but could quite easily include most genres, i am going for a quality of sound rather than something just to make a thud or loud nois…
-
0
Reputation Points
- 11 replies
- 1.1k views
-
Who's Online (See full list)
- There are no registered users currently online