Subwoofers / Speakers

Thought I'd post this in behalf of my buddy Marcos (Mega Heavy Bass), who competed in a dBDrag event today with 4 x Stereo Integrity 15's. I will let him fill you in on the scores, but for now, I leave you with this: Oh, and remember - this wasn't built as a burp machine but as something to play music. The SPL is just a by-product Stereo Integrity = teh win

You may have seeen this: ...and this ...and this Well it`s gone! - And I wondered where I had put that Grouting Spreader - It was left underneath the box for some reason :? Smashed up!! What!? A 4"x2" stud partition in the car (mad person)

Ive already purchased 1 of 4. Im about to buy the rest when i get the money. Im powering them with a solid audio 2500d, they are dual 4's so it will throw me in .5 ohm, which is pushing around 3kw for me. Question im having is, what size should i make the enclosure. Many have told me to do 5 cubes. Im limited on space, but i want pure SPL, i SQ just isnt my thing, i want numbers only. What would you guys suggest?

I have a mag 12 now in 2.0 cubes at 32. I am trading for a 15, but not sure if I want it ported due to the size requirements. I have heard both sealed and ported 12's and liked both. If I seal the 15 I know it will get lower, but will i lose a lot of output over the ported 12. Both getting 1100 watts from my memphis 1000d. Its in the trunk of a Grand Prix. I listen to everything form Metal to some rap

I have heard the MACH5 woofers mentioned when people ask for inexpensive "troopers" but I naver researched them for myself.......the MAW-10 are the avialable in a d2 config?...also how much space is needed for sealed and ported, how small of a enclosure will these still shine in?...... .5^ft? thanks guys. also are they $48 shipped to 72118 con US

I'm at the point that I'm interested in replacing my Ascendant Audio 10" Assassin with either another 10" with something a little more powerful. I'm interested in the SPL subs that Loyd tested. Does anybody know when they will be for sale? If its going to be a long time, lets talk about the loudness difference between my 10" Assassin, and maybe a 12" MAW powered off 300watts. I've also been looking at tc's t1000 line, I like the looks of them, mechanically. I really would like something in either a 10 or 12 that moves alot of air with 300watts.

i have some kenwood 6989ie 6x9's 4-way and the tweeters on the speakers burned. my question is why are the tweeters burning? i am runnning this speakers on a koiiler 2 ch amp actully i am running 4 6x9's to this amp.two 6x9's to one channel and the other two 6x9's to the other channel.the amp is 800 watts peak. the speakers are 280 peak power,rated power 70 watts.impedance 4ohms. i would really appreciate some info. thanks

In a 2.0 @ 27hz for now, might modify a 3.2 @ 33hz for this sub.

ok well i have decided to go SQ for my system... i wanna know what the best speakers would be for this... i need 2 5.25" speakers and 2 4" speakers.... right now i am using the infinity reference speakers and they sound pretty good i was wondering what might be better then these... price doesnt matter and im gonna fit up an amp that will match the specs of the speakers.

I just installed my maw-15's. And they sound great. But I know alot of you say i must break them in. How long will that take? And how would you recommend breaking em in? I usually just play at half volume, but once in a while turn it up about max then turn it down after a few seconds. I do this for about a week and then start giving the sub alot of power constantly. I get carried away sometimes and just want to give the subs max power. I have a problem lol. will giving it a good amount of power once in a while, damage the future performance of the sub? Any tips on breaking in? And is the after math after breaking them in really that dramatic? And anyone wondering if they …

I spent some time on the net looking a different box design programs ,as I'm getting to build my first box ,and now more confused than ever. esp. with WinISD which many seem to use. There always seems to be a box or component of the software I don't know how to complete and so never seem to realize any ultimate box design. I'm leaning to making a sealed box ultimately, but am somewhat interested in a slot ported box if I can get the dimensions right that will fit in one side of the trunk of my car "95 Impala SS" and a programme that will let me configure those measurements. I did find a website with some ported box options, but something just didn't strike a cord right…

I'm looking to build a serious quality HT sub that will really hit the lows, and with a FS of 15.4 hz thats enough to keep me smiling. i was thinking along the lines of a rectangular box with a 6" port and roughly 15 cubes tuned to 20 hz, what do you guys think? gives me a miniscule bump in the low 20's but keeps the f3 at ~17 hz. i was thinking 1" MDF with a double thickness front baffle, but am not quite sure how to brace it. (i can't wait for the IXL drivers) http://www.techytoys.com/store/product.php?productid=4501 thats what i will be using for an amp, The buttkicker 1100w @ 4 ohm. (i like the idea of a separate sub amp instead of the plate amp setup because i can th…

will 30 sq in be fine? cuz i wanna use this box:

ok so i have two oz audio ME 10.4's one of which just got its dustcap ruptured during a move. it's a nice sized crack that spans the diameter of the cap, but it's not a hole. i've tried numerous times to contact oz to get a replacement to no avail [and i've heard they don't offer replacements after the warranty period anyways] so i did two things. first i epoxied the crack yesterday. second i found someone with an ubranded RE SR dustcap that seems to be the same shape sans oz audio imprint. pic of RE SR for reference: so my question is whether either of these modifications to one sub will alter the combined sound of both subs. i know you're not supposed to mix speakers t…

Okay the recommendation for a sealed MAW-15 is 2.2 cubes which from my calculations will result with a Q of 0.548 (roughly) which should yield a tight response. I usually have built enclosures before with a Q of .7 and at the very least built enclosures with Q of around 6. My question is that has anyone tried these with a higher Q than the recommended and what were your results? For example below are some boxes sizes I came up with, no damping fill. Vb of 2.93 cubes = Q of 0.501 Vb of 2.5 cubes = Q of 0.524 Vb of 2.2 cubes = Q of 0.548 Vb of 1.88 cubes = Q of 0.578 Vb of 1.65 cubes = Q of 0.605 Vb of 1.10 cubes = Q of 0.704 Vb of 0.61 cubes = Q of 0.904

My new toys;

Hello, i have been hearing many good things about the MAW subs, but i would like to know how they compare to other subs. I have owned INfinity kappa perfects, Perfect VQ, ED K series(original, and v2), and currently i am running an SS RLP 12. How does the output compare to these and others such as IDQ, or the current ED k series, since those can also run in small boxes for a 15. Also, since the Qts is so small on the MAW 15, can it run in a smaller box than the 2.2 sealed and 3.0 ported with good results?

What it says, I have an oppurtinity to change the subs out. I have ~2000rms to work with per sub, just curious which one would be louder and if the DMXs can get low, cuz the BLs don't get the lows I want. '

Okay I am offering $10.00Cad to the first person to make me blueprints for 3 MAW10's in a ported enclosure.. they can be sperate chamber or all in the same chamber as long as the box is tuned to 29-30HZ. My trunk is: H-14.5" W-36" D-12" , The specs for the 3 10's show 1cuft per sub ported to 29HZ. I can't seem to do this for some reason so any 1 person that can draw up a blueprint will get the $10.00Cad.. PS- Port need to be in the front baffle of the enclosure, if all 36 inches are used... Thank you Justin

Hey all, I was thinking about getting 2 RL-i8's for my 99 4door Tahoe, would this be enough to get decent bass? I know I have a lot of room for subs but I don't want to take up too much space (I have 2 kids). I have not heard these subs before, but from the vedio that was put out from the hellboy box amazed me. I know I wont get thoes numbers they put up but I still want some decent sound and loudness. Thanks for any input.

just installed it after i finished the box http://s163.photobucket.com/albums/t288/au...ent=Thump_2.flv

I'm going to attempt my first door pods. There not going to be down low and the bottom of the door like most. Mine will be up a little higher. My question is, whats the best way to face them??? Should they (6.5" mid & 1" tweet RE's RE comp set) both (pass & driver) be angle up towards me? Or the one on the pass. side angled towards me, and driver towards the pass.? :confused: Or what other suggestions would you recommend?

Hello guys/ladies, I have been buying peice by piece for a Diy active component system, Right now I currently have: Headunit- Sony Cdx-Mp70 ( yes its sony but it will work for now) 4 Channel- Power acoustik amp Mono Amp- lanzar Vibe1800D Electronic Crossover- Coustic XM6 Okay so for so good I guess, I am not too sure what to get for mids I am looking into Dayton RS series as well as Mach 5 Mli-65's. Mark at mach 5 is sending me some Mli-65's to test and do a review, I'll have to see if I like the way they sound.. As for the tweeter I have a pair of Dayton ND20FA's coming from partsexpress on Wednesday the reason I ordered these was becuase of all the reviews they recieve…

I am either going to port my single maw i have now (3cf net tuned to 32 hz with 31sq ft of port area) or buy another maw and do 2 sealed at 3.5cf net , only no separate chambers. . there is a brace though . Which would be your choice? I want louder, but dont want to lack in sq. i would stuff the sealed box heavily to make up for the space. which do you "think" would be louder out of the 2 setups?

besides diff prices on the amps, would the 1st way (wiring them in parallel AND series) affect the speakers any? #1 #2