Subwoofers / Speakers

The site says 1cuft per sub ...so should I go 2cuft net for both...or a lil more? lets say 2.2 cuft for both And also...I am thinking of getting a Lanzar Opti2000d. Is that a good choice for these subs? the opti will give them 350wrms (which they are rated at) @ 4ohm Thanks my first post here

ok so I'm trying to decide between the RE se 10's or FI ssd 10's using a fosgate 100001bd 1400 watts rms @1 ohm they will go in a sealed box in my 03 silverado ext cab under rear seat firing forward I have heard the RE subs but have not heard the FI but i here good things so any ideas? the box will be 2.4 cu. ft. total so 1.2 per sub

right now i have a 15" TC Sounds LMS-5400. when i bought it i was looking for very clean and loud bass. the LMS-5400 is without a doubt the nicest sounding subwoofer i have ever heard, but now i want to go even louder. i don't really care if the subwoofer sounds increadibly clean and undistorted because i'm just looking for more output. I was looking at either the 18" TC Sounds TC5200 or the 18" FI BTL. What should i get?? any input would be appreciated!

who has them for both the 10 and the 12, i couldnt find it listed on the si webbie, maby i just dont know where to look.

as stated previously... the SPL proto 12 is on the way here... and after I do the offical business related testing for mark.. its time to have some fun... post what videos / testing you want to see.. power... isn't a problem we'll have 4 sundowns, and 2 memphis 4kws on tap... vehicles... gotta suv, hatchback, trunk car, and crx on tap.. boxes... aren't a problem.. we've got 20 sheets of wood, and saws.. Loyd L.

Hey everyone. I came across this forum through caraudio.com and thought i would try to get some help here. Just like the title says...I have an AA Avalanche in that box right now with 1000 watts and it's just not loud enough. My budget is about 300 (cheaper the better). I have an eD nine.1 to power so i can give it 1200 clean watts at 1 ohm, and i would like to use the same box. I know it is tuned more for SQ but it is still a decent size. I was looking at the Fi BL, SI Mag, and TC-3000 (although that one cannot be wired to 1 ohm). The BL and Mag are really intriguing me after doing some research... (Also, where can i get Mags and how much? I can't seem to find that info …

whast the prices for the bm and the mag d2's? i was wondering for each size.

what can i put on the crack to help it hold together for the time being, its a sligh crack, and its not really getting any bigger, but it probably will with time, i bought it for the mini cooper, and im gonna use it until i need a recone. it doesnt have any affect on performance so at the moment a recone doesnt concern me. but im wondering if theyres anything i can put on the crack to help hold it together (hopefully something that wont be too ugly either) but ill have to live with it. VJ

http://www.sounddomain.com/ride/2346787/12 So far they're in 3.25cf sealed a piece... if I need to, I can always port them to 40 or 45hz with a pair of 6" ports per sub, and hit the magical 150 mark fairly easily But I want to try for 150 without porting

I know there were a couple of reviews on mach 5 products, most of which are gone. So if you posted the review on an other forum, maybe you could post it here again. Just a thought

I always see the ports extending INTO the box...what if the port was on the OUTSIDE of the box? Would this make any difference?

Just curious if we are anywhere near seeing this driver, and if so, do you have any information about them?

Keep us posted on this thing

Thought I'd post this in behalf of my buddy Marcos (Mega Heavy Bass), who competed in a dBDrag event today with 4 x Stereo Integrity 15's. I will let him fill you in on the scores, but for now, I leave you with this: Oh, and remember - this wasn't built as a burp machine but as something to play music. The SPL is just a by-product Stereo Integrity = teh win

was going to buy another 15 and have two 15's in a sealed box off 1500 rms, but been told by some guys from team kicker that my zx1500.1 can run at 1 ohm daily all day. So now i may just switch out my crossfire vr1000d for the zx1500.1. With the difference of 500 rms, should i notice an audible difference. I just can't afford the other 15 right now and i know that one 15 ported vs. two 15's sealed should get me the same output.any help is appreciated

I just bought a 15" D2 and wants to know if 2.5 cubes sealed box would be a good size for the sub, this is strictly for SQ. Thanks!

I have built a boxthats tuned to 32 hz,after port and spkr displacement i have 1.0 cu.ft of space left, my question is will this work or will i need to build a different box this is a dual ported box and it is for 2 12 mags new version....also if this will not work how about a sealed dual chambered box with each chamber @2.2 cu.ft.,will this be to big sealed? btw the amp is a DEI2400D(1400watts @ 4ohms, 2400watts@ 2 ohms)

Looking at a set of used CDT CL-61 6.5. They come with tweeters and crossovers too. What to you guys think. How good will they sound?? i listen to old school rock and rap.

How will 2 15" Mags do in 8 cubes after 70sqin. or port @28hz? Right now my 15" Q's dont like it much

i was thinking about putting 2 (maybe 1 depending on price) of them behind my seats on the floor instead of the AE subs http://www.tcsounds.com/forums/index.php?showtopic=10 i mean if what kyle says is true, this could be my next sub.

just ordered 2 12" mags and a sundown 1500D can't wait to get them hooked up and hear all the hype surrounding these subs!

We just got our shipment of BM's from Nick today and they look great. Pictures and specs are up on our site and they are ready to ship. http://www.audiojunkies.com/Categories/Bra...reo%20Integrity

I plan on getting a SI Mag D2 15 in the near future and I'm wondering what kind of box I can make to get the best of it. The limits of the trunk of my car are 16" high, 16" deep, and 36" long, or about a total of 4.2 cubes max internal volume. Would it make more sense to go for a large (~3 cubes) sealed enclosure (Decware Wedge style) or a amaller (~3 cubes after displacement and port) ported enclosure? Quality of sound is the most important factor, but I'd prefer lots and lots of that quality sound. The more headroom I can get, the happier I'll be. It will be powered by an Orion 1200D. It will replace two IA LI 12s sharing ~3.2 cubes at 32hz.

pair of Mach 5 12's in 4.5 cuft, tuned to 33hz... in my car, 05 aveo hatchback. TL sensor was placed on the headrest, vehicle sealed up.. http://img237.imageshack.us/my.php?image=mach5installcb3.jpg we then tried the 2 loudest frequencies and turned the amp up until they stopped getting louder @ 35hz, the Mach 5's did a 138.2 with 1843 watts @ 40hz, the Mach 5's did a 137.3 with 1050 watts video of them @ 40hz http://s2.photobucket.com/albums/y50/vladd...nt=S5000240.flv very loud woofers for the price... one thing I do need to mention... the coils on these drivers dcr pretty low... 2.3 ohm per coil... I'd call it a nominal dual 2 ohm driver myself.. at the very least a …

http://www.edesignaudio.com/edv2/product_i...&products_id=49 look very interesting