Subwoofers / Speakers

ok so I'm trying to decide between the RE se 10's or FI ssd 10's using a fosgate 100001bd 1400 watts rms @1 ohm they will go in a sealed box in my 03 silverado ext cab under rear seat firing forward I have heard the RE subs but have not heard the FI but i here good things so any ideas? the box will be 2.4 cu. ft. total so 1.2 per sub

Keep us posted on this thing

Would it be possible to repost or fix the links to the images on the Mach5 Testbed site? I want to see the graphs for the test of the MJ-18 that was posted July of last year. Thanks

The site says 1cuft per sub ...so should I go 2cuft net for both...or a lil more? lets say 2.2 cuft for both And also...I am thinking of getting a Lanzar Opti2000d. Is that a good choice for these subs? the opti will give them 350wrms (which they are rated at) @ 4ohm Thanks my first post here

Hey everyone. I came across this forum through caraudio.com and thought i would try to get some help here. Just like the title says...I have an AA Avalanche in that box right now with 1000 watts and it's just not loud enough. My budget is about 300 (cheaper the better). I have an eD nine.1 to power so i can give it 1200 clean watts at 1 ohm, and i would like to use the same box. I know it is tuned more for SQ but it is still a decent size. I was looking at the Fi BL, SI Mag, and TC-3000 (although that one cannot be wired to 1 ohm). The BL and Mag are really intriguing me after doing some research... (Also, where can i get Mags and how much? I can't seem to find that info …

I know there were a couple of reviews on mach 5 products, most of which are gone. So if you posted the review on an other forum, maybe you could post it here again. Just a thought

whast the prices for the bm and the mag d2's? i was wondering for each size.

Another round of testing done this past weekend. This time, using the MJ-18 in a 250 litre Sono-like tube. Check it out if you have a moment: http://testbed.mach5audio.com Best regards, Mark

i was thinking about putting 2 (maybe 1 depending on price) of them behind my seats on the floor instead of the AE subs http://www.tcsounds.com/forums/index.php?showtopic=10 i mean if what kyle says is true, this could be my next sub.

http://www.sounddomain.com/ride/2346787/12 So far they're in 3.25cf sealed a piece... if I need to, I can always port them to 40 or 45hz with a pair of 6" ports per sub, and hit the magical 150 mark fairly easily But I want to try for 150 without porting

he bought it used off ebay and on the cone it has the logo that says "RE", not the other logo. it pretty much looks just like this: so i'm THINKING it might be an SX but i'm not sure...is there any way to find out without having to send it in to RE and ask them?

Looking at a set of used CDT CL-61 6.5. They come with tweeters and crossovers too. What to you guys think. How good will they sound?? i listen to old school rock and rap.

I thought I read some where that Mark was going to have a 15" sub available in the future. If this is true, will it be DVC 4 ohm or will it be SVC 4 ohm? Whats the RMS going to be for it?

pair of Mach 5 12's in 4.5 cuft, tuned to 33hz... in my car, 05 aveo hatchback. TL sensor was placed on the headrest, vehicle sealed up.. http://img237.imageshack.us/my.php?image=mach5installcb3.jpg we then tried the 2 loudest frequencies and turned the amp up until they stopped getting louder @ 35hz, the Mach 5's did a 138.2 with 1843 watts @ 40hz, the Mach 5's did a 137.3 with 1050 watts video of them @ 40hz http://s2.photobucket.com/albums/y50/vladd...nt=S5000240.flv very loud woofers for the price... one thing I do need to mention... the coils on these drivers dcr pretty low... 2.3 ohm per coil... I'd call it a nominal dual 2 ohm driver myself.. at the very least a …

I have built a boxthats tuned to 32 hz,after port and spkr displacement i have 1.0 cu.ft of space left, my question is will this work or will i need to build a different box this is a dual ported box and it is for 2 12 mags new version....also if this will not work how about a sealed dual chambered box with each chamber @2.2 cu.ft.,will this be to big sealed? btw the amp is a DEI2400D(1400watts @ 4ohms, 2400watts@ 2 ohms)

How will 2 15" Mags do in 8 cubes after 70sqin. or port @28hz? Right now my 15" Q's dont like it much

just ordered 2 12" mags and a sundown 1500D can't wait to get them hooked up and hear all the hype surrounding these subs!

I was listening to stereo pretty loud last night and every thing was fine. i went to leave today and i notice my rear side speakers were not working right. They are JBl 2 way 6x9 GTO 's. they came with the truck from the previous owner. They are rated at 150 watts. i had a 2 channel MTX 280 watt amp hooked up to them running at about half turned up. Now only the tweeter or the little spekear in the center of it is working. All i here is the highs and no mids. I checked all the connections and even hooked it back up to the head unit and still the same result. The fronts are just off the head unit and they are fine. I don't know what i did?? They sounded great. For not buyi…

First off I would like to thank Mark for allowing me to test these at no cost to me. Ok Here it goes. Initial Impression: When I got off of work and walked around to my front door I saw a box that vaguely resembled an extremely used soccer ball. It was brown and taped up and kind of rounded at the corners. I quickly tore into it and got a peek at these things. I can tell you these are built to the highest of quality. No glue on the surrounds, the surround fits perfectly in the sunken surround landing. The bead of glue on the spider was even all the way around. They just looked high quality. Not fancy high quality like a Ferrari, high quality like a cleanly built RX-7 (no…

I plan on getting a SI Mag D2 15 in the near future and I'm wondering what kind of box I can make to get the best of it. The limits of the trunk of my car are 16" high, 16" deep, and 36" long, or about a total of 4.2 cubes max internal volume. Would it make more sense to go for a large (~3 cubes) sealed enclosure (Decware Wedge style) or a amaller (~3 cubes after displacement and port) ported enclosure? Quality of sound is the most important factor, but I'd prefer lots and lots of that quality sound. The more headroom I can get, the happier I'll be. It will be powered by an Orion 1200D. It will replace two IA LI 12s sharing ~3.2 cubes at 32hz.

Hello Everyone, Just dropping in to tell you that we found a basket/frame that will work nicely for the Delta midrange drivers however we are still lacking a basket for the omegas. I'm not going to set any kind of release date considering how unpredictable this sort of thing has turned out to be. Once we have a production version of the prototype it should be approximately 1-1.5 months before production can start full swing if the lead times we have been dealing with are any indication. The basket for the delta is stamped and allows 14mm of movement before the spider runs into the base of the frame with a flat spider. We could use a spacer and get the needed excursion f…

We just got our shipment of BM's from Nick today and they look great. Pictures and specs are up on our site and they are ready to ship. http://www.audiojunkies.com/Categories/Bra...reo%20Integrity

sooooo, here is what is going in my truck this weekend... 8 SI BM 12"s, 2 Sundown audio SAZ1500D's, and 2 SAX100.2's should be a purty fun install. pics and testing results will be posted up here after the weekend.

1st of all, im new to the forum.. so hi everyone Had a demo of a 12" Mag two years back, in canada - the car was ratting at an SPL probably similar to the subs' output, so it wasn't exactly an ideal install and demo... however, i got interested, enough now to spring for one. but i live in switzerland. how do I get one? pls help... me wants MAG bad!! I could offer my car as a demo-car.. :D cheers, Mike "Demo car": it has 2x10" midbass drivers in the doors, Exact MG10 fullrange upper end, (hopefully soon Audax Midrange and Ribbon tweets), an Alto UCS Pro processor, an embedded PC and homebrew USB-DAC for a source... currently all parts are a percentage short of being ins…

http://video.snoopdan.com/reviews/mach5.htm