Subwoofers / Speakers

Hey guys, I was going to write you an email but I thought that everyone might want the info. Can I get the mesurements of the 12" Mag? Depth (still the same?) Cut out (11 1/8th I beleive) Magnet Diameter & lenth Basket Diameter & lenth Weight Thanks, Justin

i hear this thing has great sq... but i'm cuious of its spl also. i'm deciding on new subs now... i'm looking at the magnums, sx or se. i'm trying to save a little money. also... they aren't going for competiton or anything. i'm hoping to spend less than 900 on subs and amps... hoping. but sq is important to me... i'm stepping up from 2 12w3 i want to keep the sq.. but add alot more loud sticking with 12 inch... i'm hopefully getting a 97-99 gsx in spring... and i don't believe the trunk will be big enough for a 15... i'd like to go 2 12s just because i like the look of 2 i'm hearing that one xxx or brahma would be just as good as 2 se. any input... i'm open to suggesti…

anyword from when they will be shipping the subs to our homes.

So, is diffraction an issue in car audio as well? I'm thinking both of front systems and sub boxes in particular.

so im shopping around for some tweeters to be ran by my SAX-100.4 and i came across these... http://www.parts-express.com/pe/showdetl.cfm?Partnumber=272-110 i dont know much about different tweeters, but would these work for my front end? if so, would i need to take the cap. off that is already soldered on it, and just use the amp Xovers? ill be running them with these or if you know of any other cheap"er" tweaters that are a good choice feel free to chime in

Right now I'm running a icon 10 in a ported box to spec off of a aq1200d. I wanna try another set of subs and I have 2 si bm 10s laying around, my question is will those be louder, running off the aq1200d and a ported box, or will it pretty much sound the same as the icon? I was also thinking about a pair of sealed (no room for ported) 12s such as type-rs or ia 187s. Which route will be significantly louder?

well i could really use some help with my box design.. i ordered a 15 Xcon on monday and i want to start on the box for it.. i have a table saw and router and have built a couple boxes before.. but i am kind of new to this and want this box to sound good,, it will be going in the back of my 06 ford-f-150 fx4 supercrew.. i plain on putting it were my small side rear seat folds... i would like it to be 21x21 then 27-26 tall. ( sub on top ).. i would like it to come out to the 4 cu.ft ported.... they say 26-33 hz..... i listen to mostley rock...hard rock... but i like most music that sounds good.... i love good bass... i am not very good at figureing out all the math...…

I need to decide on the speakers that will handle the top end of the audio spectrum. Here is what I have; my 18" Q with the BP option on a sundown 1500, the L8's from HAT will handle the mid, I have an older 4 chan v12 alpine, that should work, and if not... which will relaly piss me off... I'll need to get another 4chan, or 2, 2chan amps. I think the alpine gets about 45-65 per chan if I remember correctly, but I also seam to remember the rating was a good deal under actual benched amounts from when other people tested them. I don't really have a budget, but I honestly wasn't in the mood to pay what the L1 pro's cost even with the 25% off. I just had my doubts about th…

Currently have pioneer 9900 headunit, sundown 100.4, morel supremo tweeters and sea excel w18ex. Want to cross the seas at 1200 and morels at 2200. So i want to get another speaker to fill in this range 1200 - 2200. What would be the easiest way to do this? What would i need, external processor? Will i need another 2 channel amp? Also what are some good midrange speakers. ranging from $100 - 250 for a pair. Would be in a Jeep Grand Cherokee. Not completely sure of install yet.

What kind of speaker connectors are on the D2's? I'm ordering up new wiring goodies for my 15" D2 and want to make sure I have everything needed. Thanks

my friend is building a box for me that will be 3.7 cf @ 27hz.My question is how much port do we need? what's the displacement for the port in that box? any help is appreciated

I have a SS xxx 15 with a psi recone. the surround ripped does any one know where i can just get the surrounds ?

I have seen several good comments about their amps. My question is, are their 6.5" comps as good as their amps?? Pricing looks VERY inviting. On both the comps and their 4 channel.

I am slowly getting tired of listening to my bootleg setup while i wait for the peerless hds tweeters to become in stock. Are there any other tweeters that anyone recommended/ had experience with that they feel would be a good 2 way setup with the sea excel mids. The peerless seemed to work well because they are capable of being crossover relatively slow since the excels have heavy breakup around the 1200 area. From all the research and reviews ive heard about the peerless they seem almost untouchable and i want something that is similar quality and performance and also price range. Suggestions would be greatly appreciated because Madisound said another month on backo…

Nope.

Ive been told through another post I need to stick to Atomics enclosure reccommendation to get the most out of my APX 18 the enclosure info says sub and port displacement is already figured in their equation which is APX18-ported 6.0ft3 (40six10”long) ( 32Hz)=5000w (SB) So do I figure 6 cubes as if it was sealed then do the port to fit their req.? and I dont know how to read thier port rec. I see a 10" long port, 6" wide, but whats the 40. or is it 6" in height? Please help so I can get this box built! Or if someone wants to give me an easy out and tell me exact outside measurements (.75 MDF.) I have up to 50" in width, 25" in height and 19" depth. Thanks guys!!!

about a yr ago I bought a couple of used 9500's with the full composite cone. I finally have gotten around too testing one, and I am impressed with the amount of effeiciency, considering how much power one is known to handle. what I am wondering is, if I were to recone them with DD pulp cones would that help warm up the tone a bit? when listening too rap or anything with mostly sinewaves they sound fine. when listening too metal, rock, or classical they sound almost lifeless. so if anyone has had a chance to test them with both cone materials please chime in

ok i have an older model mj 18 and was wondering what kind of bass response i would get if i ported it in like 3-4 cubes??

So my buddy had his system stolen and he gave me 2 recone kits for some 15" orion hcca d4 subs...since i got them for free i was wondering if there was a custom basket and motor i could use? Or what basket and motor would fit? Please help cuz i know these recone kits run around $150 so its a lucky break on my side

Hello folks. I wanted to get some opinions on 8inch midbass drivers. I'm changing up the front end in my Dodge Durango. I will be running 4 Diamond Audio M6 4inch midranges and a pair of M&K softdome tweets. They will be actively passed at 250 up at 12db per/octave. One set of mids and the tweets will reside in custom pods on the front corners of the dash(tucked in between the dashboard, A-pillar, and windshield so they can be on-axis and facing the passengers) and the second set will reside in pods on the upper front corners of the front door panels. All will be laser aligned to a center point about a foot past the front seats. The midbasses will be located in the lo…

All right im usually roaming around the caraudio.com forums, but have been browsing here for awhile.... now im hoping someone here can help explain how my subs are blowing cause i cant figure it out. i had 2 dd 1508's hooked up to a Saz1500d, both Svc 4, so 2ohm load ~800wRms, Set the gain using a multimeter to a little bit below the voltage it should have been at for 800w to try to avoid any clipping from the amp. The first sub stopped working without any smell any or any heat even felt on the sub, both of these subs are sealed so there should be no over excursion problems, and they are about 50w under RMS. Now i rebuilt the box for a single 8" since i still had one of t…

I was wondering what the pros and cons were to having subs face each other? ie would they pressurize the air better? (since both subs are compacting air on a certain point) To answer this consider same number of woofers, and for enclosure type consider straight wall compared to clamshell. thank you in advance for any insight.

i have a ab400.1 and i have dd1008a and a dd1510 that im going to recone to 15's.im going to pick up 2 more dd 1515's soon.i was wondering if my ab 400.1 is to much power for 4 dd 1515s4? im going to use this setup for daily use and comp use. this setup will be going in a 1991 ford explorer.

hey guys, i was wanting to install my jl speakers buttt i had a question i know u guys can help me out with. my stock speaker size is 6x8 in front and back. up front, i have the jl 6.5s and im doing tweeters up in the pillar up front. then in back is where my problem begins, the speakers are 6x9s and the hole is for a 6x8 so how much if any will i have to cut out to make them fit?

From the DC specs page i noticed that the BL for a level 3 15" is 22.18 TM and the BL for the Level 4 15" is 16.15 TM.. now from the specs, the level 3 has 17.5lbs of magnet, vs the level 4's 28.5lbs.. from my understanding, BL stands for magnetic strength.. how come the sub with less magnet material has a higher BL??