Subwoofers / Speakers

Since my RCA pictures and speaker wire comments pretty much started a fire last time, here is the official thread to either put up or shut up. I will send out a 20 foot piece of Omni speaker CABLE (no interconnects like I have, as they are just too expensive to send out like that). Twenty feet is more than enough to swap out one side of a stereo with. What I advise doing is only putting this wire on one side of your system, whether it be car or home, and take a listen to the difference. Reply to this topic only if you wish to be on the demo list. I will pay for shipping to a person, and then when that person gets the wire they pay shipping to the next person, and so-on a…

I got this 1200 performance teknique amp that keep blowing my tweeters any sugestions please help

Well guys after having a miss-hap with the old skewl kicker (kicker c-series) I decided to go with an eclipse Ti 12" and boy am I one happy person!!!!!! I can't believe how wonderful this thing sounds. I dropped it in the box my RE SE 12" was in (2^3 net) and I know I know it's probably not built to specs but man I just had to test this thing out!!! It sounds a lot better then the SE did with higher range freq probably around 63 and up where the SE lacked. Low end is pretty good too, I might test this sub out in a 1^3 box I got sittin around that's sealed. All n all I'm very happy with my purchase and just wanted to share it with you guys! = me

Here is my PM to denim... i thought i would ask everyone else this too.... """ Like i probably have told you more then once. Im running 2 jl 10w3v2's and a jl 500/1 amp. I was in my car today after doing some more rear hactch "dynomat" (i use ice and weather shield but thats illrelivant) any-who... I really like the SQ of my subs they hit everynote, and there loud, like 141 is loud, but im looking for more. the SI MAG 15 D2 will that sound as good as these, and have the bass, the pounchy tight bass, even when turned up high? because i know there is a reason they make subs 8"-18" for a reason. I mean would i be better of doing another 2 10"s + another 500/1, or doing 4 12w…

How does this sealed box look for a 12" Magnum D2? I wanted 1.25 cu ft but w/ driver displacement I need 1.35 cu ft. 2333 cu in. = 1.35 cu ft H" x W" x D" 12.5 x 21.75 x 12 - External 11 x 20.25 x 10.5 - Internal 1.25 lbs polyfil Is that too much polyfil? Not enough? I tried to stay as close to the golden ratio as possible but I don't want the box to be more than 12.5" high. So does it look good?

ive got a 1991 Corolla SR5 (which is a 2 door car) it has a fairly small trunk but im sure its enough for 1 12 ported or 1 15 sealed... im planning on purchasing a new D2 soon and wasnt sure what i should get... ive been thinking and researching for 2 weeks and i know this is a GREAT sounding driver (heard a 12 sealed in a friends car) my only dilemma is can the 12 OR 15 take power from a us amps 1100T that puts out roughly 1100@ 12v? im not sure what the rms is at my running voltage (almost 14)

Man, I'm impressed by the looks of this thing...I saw pictures and all, but in person is just that much better. Dig the look of the spoked basket b/c you can see a lot of the cone...just gives it a better look, IMO. Chromed motor = I'm surprised by the suspension stiffness, though...seems to me fairly soft compared to the old one? Maybe it'll make the cone move "faster"...help out transient response... It's just too bad that all I have is ~300w @ 4ohms right now...waiting on my Tantrum to arrive. Must...go...install...

Hi guys, Haven't been on here for a while. I'm wondering if someone would be able to design me a box for my first gen. Mag 15" that would be a perfect cube of 3.5cf (internal) with a 28hz port. I've been trying hard to figure it out but it just doesn't work. Thanks, Max

need some help as the website is a little scarce on details I have 1200watts (600x2 actually), and im thinking of two si d2's sealed in 1 cu ft each good idea or no? #2 for those that have one can yo do me a favor a)whats the mounting depth b)overall diameter c)OVERALL depth (from magnet to surround trying to see if I can fit two of these or not thx

So...I need new door panels. I figure while I've got those off, I might as well sound deaden the doors. Then, I figure I might as well upgrade my coaxials to components 80wpc to the Boston FX6's just isn't cutting it anymore... My criteria: * 2 ohm impedance preferred. * At 2 ohms stereo, my PG Tantrum 500.2 does 250W/side. * Going to be mounting the tweet in the A-pillar trim...I prefer the sound of silks over metals...at least for all the ones I've auditioned. * The mid is going in the stock door location, with a 6.5" cutout...I don't know the max. mounting depth as of yet, but the FX6's are 2 1/8" inches deep. So that fits without a problem. * I listen to a lot of cla…

If i put 2 15" SI MAG D2 In my ford explorer 96. 1. how much power rms should i try to put out... 2. expected numbers i would get close to... would it be loud? cus my system of 2 10's hits 141 right now.

well i have decided that it is time for a switch up in the system. i curently have a RE sx 15", with a american bass 100.1, but the sx is being sold today. after reading many rave reviews and talking to sean (ibander on most fourms) i am pretty set in that i want to get the new mag. the only thing is if i want a 12 or a 15. my dilemma, i would like trunk space. but no big deal if i dont have any. ibander said that with too big a box none of the sound will make it into the cabin, i believe what he says being that he knows more than me and has more experience. i will probally just go with a 12" ported i dont really have a question, or a point. just wanted to say hi and yo…

I bought one of these of this same guy last week. $72 shipped. Just hit the reserve of 59.00 and you'll be golden. http://cgi.ebay.com/Adire-Audio-DPL12-The-...QQcmdZViewItemh http://cgi.ebay.com/Adire-Audio-DPL12-The-...1QQcmdZViewItem

Ok guys here's my situation I'm debatign between 2 12's or 2 15's D2's I have plenty of space and power and this is going in my 05 ext cab silverado which would you pick ? 2 12's or 2 15's My power on tap is a orion 2500D and i have about 10 cubes to toy with.

I own a 2006 Scion TC which is a hatchback as the trunk is not sealed off at all, it's just behind the rear seats. Now, I ordered a stereo integrity 15" Mag that needs around 3.0 cubes for sealed, and 3.5 for ported according to stereo integrity. The sub will be powered by a directed audio 1100.d which puts out about 1200wRMS at 1ohm. The only real way I could pull this off and still have trunk space is by having the speaker fire upwards, into the top of the hatch glass. How would this sound in my car compared to the same sub firing towards the driver's seat or the rear of the trunk? Also, in real world terms, how much louder is a ported enclosure tuned properly going to …

Well, I received my new 12" Mag D2 and this thing is amazing, I'm powering it at a 4 ohm setup running around 700watts (visonik 900xD). I'm curious to see what it'll do with the full 1400 or so watts. Its mounted in a box I picked up from Mark, I believe its 2.8 cu. ft. ported at 28Hz. It is very very accurate and doesnt back down to anything, I'm impressed. All I want to do now is cruise around and listen to some good tunes. Just wanted to let y'all know how good you guys are doing, keep pumpin those things out! btw I'll definitly be showing this thing off, so i hope to get you guys some more sales of these wicked sub woofers. props to my bro WeDgE for sending me thi…

hello all, i currently have one dual 2ohm xxx15 in a snail shell designed enclosure wired to a bx1500d at one ohm. ive had this setup for about a year and it is very loud and sounds very good, but with this hobby, you all know how it goes; you always want to try something new and im still quite the bass-head.. ive wanted to try ddaudio for years and i think its about time. so, i was wondering if any of you guys would recommend the dd3500 series. ive always been a single-sub kind of guy, but 2 12s sound so intriguing because of the added cone area over a single 15, especially that of the dd variety, though the 9900

I just scored one of these on ebay for $70 shipped. It was a store display model. Did i get a decent deal? Also if anybody has any info or box specs they can give me i'd appreciate it.

just wondering if anyone has played with them yet, and what they thought, I wanted to ask outside of the RF forum, I usually have access to all the new RF stuff, but not really anymore

i was thinking either diamond audio m6 or d6. any other recomendations? and what is the difference between the m6 and d6 from DA. which of them sound better. thanks

which setup would hit harder and sound better all around, two rl-p 12"s or one rl-p 15"? also what would be a good amp to power the sub(s)? thanks!

words cant describe this sub it is the most awsome sub i have owned and gets so low and loud with my punk ass rockford power bd500. i cant wait to put some more power to it to see what it does, i will try to post some pics of the box soon but here is one or two of the mag in its awsomeness. thanks yall!

i was thinking for my 2006 install 3 10"s of something instead of a single 12" RL-p D2. Both will be in 2-2.5 cubes ported to 31 hz (so i need 3 10's that will be nice in a small ported box. I know for sure it will get louder with the 3 10's of good quality, but is it really worth the xtra money? and space and power aint a problem, my trunk is 42" long. list of drivers i may be using (I would prefer a black cone to match my 2006 install) no IA or ID, i want something new: RE SE 10" SI mag (Do they make 10") RL-I 10 OZ ME Arc Arc's eD 11OV2's anything you pple would reccomend.

Temporarily finished. I had Tara Labs custom make me some Spectrum 3 "Y" calbes and they showed up today. On to the pics. I'm just going to dump them on here and then hit the road. I haven't eaten dinner yet and it's 9:00 PM. 'gonna drive through a fast food place and go drivin to so I can run through some CD's.

are you all planning on coming out with like comps or any other product besides the mags???