Subwoofers / Speakers

Im looking for a 12" sub. Im looking for a louder one but still sounds good. It should probably be under 1000 watts because the car i have right now i dont want to upgrade the alt or run another battery because i might not have it much longer. any help would be great

How much poly fill should I add to a new sealed box Sean DeYoung has built me? The sub is a 15" gcon.

just seen em in jblcamry's geo on smd he said they r "special" only for him and mark from ssa. so wuts up on em' how "special" are they? lol nice dustcaps btw

Hi, I'm new to this. I never made a box before, so I'm trying to figure out how to make a ported box. I plan to get a dcon, but want to make sure I have the know how of how to make a box before pulling the trigger. I want to put it in 1.25 cu ft, tuned to 32hz, getting 400watts. What port area (not volume) should I be shooting for? I read somewhere that 8-12 sq in per cubic foot is good, which would put me at 10-15 sq in of port area, but I wasn't sure, so I figured I'd ask people that have personal experience what they recommend for this particular sub. Thanks

I spent some time on the net looking a different box design programs ,as I'm getting to build my first box ,and now more confused than ever. esp. with WinISD which many seem to use. There always seems to be a box or component of the software I don't know how to complete and so never seem to realize any ultimate box design. I'm leaning to making a sealed box ultimately, but am somewhat interested in a slot ported box if I can get the dimensions right that will fit in one side of the trunk of my car "95 Impala SS" and a programme that will let me configure those measurements. I did find a website with some ported box options, but something just didn't strike a cord right…

Obviously there is a difference between the... 1) X-15 2) Z V-3 15 3) Z V-4 15 I Know the difference in the V3 and V4 is the generation but i am wondering if anyone can give me any input on differences between how beefy the components are and the general differences between the 3. Maybe you guys can help me decide which one to get. Going to order 2 15's and they are going in the back of a 2008 Jeep Commander. Had 2 FI BTL's. How would 2 of these subs compare to the 2 BTL's i had?

My friend is looking for a new set of 6.5" mids. He is restricted to 2 3/8" mounting depth. Any suggestions for mids or component sets with this restriction? Price is pretty much no object (within reason).

ive been intrested in getting either setup, i obviously have the kicker amp, im goin to be building a box myself and help with some friends of mine, whatever setup i choose the tuning will be at either 30-32 hz (maybe 34-35 hz) anyway, which would u choose?? thanks

Just picked these up local for 100 both are dual 2's magnet says RFR3112

Has anyone had experience with these? I have read that the scs line is the ones to get if any but was wondering what people have to say about the components in general. Will be most likely looking at the 5.25" comp set possibly a 6.5" set.

Team Mate of mine old LV4's name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"…

Hey guys.....i am not sure what too do guys.....i have one IDMAX 12" dual two ohm...in which i am running 2 zed audio mini's.....think i could jus use one for the sub.....but i want a lil more bass.....and was thinking about getting rid of the one IDMAX 12" and getting 2 / 13inch JL Audio w3's.....one per Zed Audio Minilith.....I am planning on leaning toward SQ......but want too be heard "if u know what i mean".......Should i jus get another idmax 12' or change into the JL's......in both situations i would give a mini per sub....can u all tell me the benefit of getting another IDMAX or changin too the JL AUDIO's...THANKS GUYS.....have taken the POWER into consideration a…

Im planning on putting a mj 18 in a 5 ft^3 ported box tuned to 30 hz. The sub would be running of a infinity amp gettin about 400 rms at 4 ohms. Anyone know if this setup would thump? Looking to get rid of my old 10w0's and move onto a bigger sub.

As the title states I am stuck between the 2. I have 1.0 cubic foot sealed per sub. power will come from an alpine mrp m1000 so 1000 watts at 2 ohms. I listen to mainly hard rock ie five finger death punch, metallica etc. I like my bass hard hitting but accurate. All this will go in a 2009 chevy silverado crew cab head unit is a pioneer avh p 4300 and alpine components up front. Both subs are virtually the same price i was hoping some of you may have had a chance to compare them and what your opinions are. Also as far as the ssd's go for those of you who have them what options do you believe are important especially as far as my setup goes.Thanks in advance-Dave

got an better audio 1600m1 would the 12's handle the power or should I get the 15's gonna run them at 1 ohm

I have A/D/S 346cs Component set.... these are the 6-1/2 set (the most expensive one they have supposedly) I am looking to ditch the passive X-over and go all active... Question is power I want to get a Sundown Audio SAX-100.4 and go Bi amp on the components Rear channels midbass Front channels tweeters.. Does ANYONE know if EACH (the tweeters will see 100 watts each as the woofers will see their own 100 watts) these components handle this wattage ? The set handles a wattage of 120 watts BUT that is together as a set and i have no idea if it handles the same wattage by itself ? I know I know you are all probably saying why don't i contact the dealer... Well this is the be…

I wanted to get some input on components as I have had little luck with getting the goods. I have limited car audio dealerships near me and they all seem to deal about 6 manufacturers and not all that great. The best I hear around here tends to be the cheaper JL VR series. Thats not saying much I'm sure, so any suggestions for someone who cant ear them. I like them to be linear, meaning not bright in the highs and not flat in the mid bass region. And worst of all they have to be competent for my next attempt at an LSQ vehicle which will be most likely a trio of Fi SSD 15's powered by a SunDown Saz-3000D at 1.33 ohms ( I'm banking on 2250 - 2500 watts there.) I am expectin…

I have got two Precision Power 10" Flat Piston subs at 400W rms each. Recommended box type? How about for a single 10"? They're going in a honda civic trunk.

Whats up peeps. Im in the market to upgrade my current system (well atleast the sub). Running a 15"FiQ, 3.5cuft 30hz, off a crossfire vr1000d. I love my sub SQ is great and hits suprisingly hard for an SQ sub, just that the output level just isnt cutting it anymore. Thought about adding another Q but space is somewhat an issue, dont want to cram dual 15's and not get the most out of them. So im looking for a replacement. I want to stick to a single sub setup. I know that i need a high power sub so these are my current options. (Adding anouther crossfire amp eventually) 1)Fi BTL 15" 2)RE XXX 04-05 models 15" 3)Audioque Hd3c 15" 4)Memphis Mojo 15" I know i will be losing S…

Would it be possible to recone a sws 12d2 to an swr d2 series or could I use a different recone company to place in its basket I'm down for either option if I can put a different company recone what is a good recone kit to put in a d1 or another d2 thanks in advance for all others. And is it possible to run the subs at 500rms per coil which is a total of 1kilowatt to the sub total

Just wondering is these 2 subs could handle an AQ3500 (older model 3500@1ohm)?? If so, what would be the optimum box for them to be ok with this power?

I apologize in advance - you are dealing with a noob. I think I want to do a sealed 15" in my new car, but I am having trouble deciding which way to go. I have been looking at the Fi Q and the SI Mag. Is the SI really worth the extra 200? Would you recommend anything else? Perhaps maybe even a 12" to go ported with? I am not looking to make major alterations to my electrical just yet either (read HO alt), so I'd like to keep the power handling in the 1000W range. I'm looking for a true LSQ system - I want it to be clean, but get LOUD when I want it. I have about 3 cubes to work with, maybe more if I want to give up some of that golf bag space in the trunk, but I'd like to…

Couple of vids on My MJs off a Massive P3000.1

Might have to ship and want to know how much it will cost?

I have a RF T500-1bd and I want to try one of these pairs of 10s ported. My girlfriend bought my sealed dcon 12s off me for a great price! Please correct me if I'm wrong, the size of a ported enclosure determines how efficient it will be? I'm going to throw of one these in 1.5 cubes each chamber tuned to 33hz - 34hz. If you've had experience with either of these subs I'de love your input. Is anyone able to tell which of these would be louder? This is the last time I'm going to ask this, I'm either choosing one or the other due to which ever gets more votes.