Subwoofers / Speakers

Im looking for two 10" Incriminator Audio 187's. If anyone has any leads to them please let me know. As we all know the Lethal Injection series took them over so they are not made anymore. Thanks

I bought a 10" powered under seat subwoofer from the sound storm https://www.amazon.com/gp/product/B001CY13W2/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 and used an LC2i to convert the speaker signal from the rear left speaker to RCA outputs. I do not have a subwoofer stock as i have the lower trim level which doesnt incude a factory sub. I finished the setup and can barely notice the subwoofer working. The sub turns on and does work, but is extremely weak/quiet, not even as powerful as the stock rear speakers. I have tried almost everything to try and get it to work and get more bass but nothing seems to work. If someone can give me some feedback or advice that would…

OK, I am going to get a little more specific. I have an F150 crew cab, that right now I have 2 cheap planet audio 10"s under the rear seat. I am looking for a set of subs to replace these that will get louder. the mounting depth is 4 3/4 inches, max. And will play in an enclosure of .5 cu ft. Or has anyone used the single 10 in a ported enclosure under the seat? Or does anyone have any other ideas for a crew cab f150 that is still a family truck. Any help would be greatly appreciated. The two subs that I am looking at so far that will fit are the JL 10w1v2 or the Kicker comp10.

Im building a ported sub box for two 12"Dcon D4's.im in to SQ more than SPL, witch would be better a 3.2ft^3 iternal volume tuned to 30hz with 45.in^2 port area. or a 4.0 ft^3 internal volume tuned to 30hz with 60.in^2port area? im new to building ported boxes so any help would be a help...lol... thanks,,,,,,PS im runing a RF T500-1dbcp

What happened to the box plans that once were available for download? I am wanting to build a standard single DCON 10 enclosure for my Fi X, but I can't find the plans anymore.

ok i have a 2008 hyundai tiburon it has a hatchback like an eclipse I am planning on putting 1 12" RE XXX in it for streat beat but it is the 2006 model can any one help me with a choice of a amp to push it and a box for it thanks

I just order a pair of Fi ssd 18s and was wondering how big I should go on the box? i've read a few forums where people have said go on the smaller side for less peakyness or go on the bigger side and they bang hard. What do you guys think?

I was wonderin what would be louder a 13" W7 or a 15" Brahma? recently bought a brahma nd a friend of mine is buying a w7 he bet me his would be louder. I've only heard the 10" W7 but nevr the 13" version Pioneer P8-MP 15" Adire Audio Brahma 6.5" Infinity Perfect components 6"by 9" Infinity Perfect Coaxils Hifonics 1800D Hifonics ZX 6400 2.5 cu ft ported enclosure Optima Yellow top battery Stinger Alternator 18 yrs old nd this took me 2 years to save up 4 but well worth it!!

My idea, 25Hz tapped horn using Kicker CVXs, was stolen by Kicker, by Deon screen name dB-Kicker. I didn't do any of this design work or build, it was just an idea, but an idea shared between 2 men in private messages. Since my private message turned into a very public build, I took it upon myself to do the same...share private message information. I made a comment/reply in his thread about it, he ignored it and sent me 3 PMs confirming guilt. I gave him a day to reply, then started my own thread. It was ignored, then deleted, so here you go! KW Jordan Powell Private Message 08-17-11, 10:46 PM dB-Kicker Member Join Date: Oct 2008 Location: Stillwater Posts: 75 Re…

2nd Gen Stereo Integrity Mag 12 D2 How much do YOU think it is worth?

Did anyone ever compare the old Magnum vs the Rl-p ?? I doubt the D2 has been compared. Just wondering if a pair of d2 15s w/ a 20.1 will pound on my pair of rl-p on ~1500. Ported :-D.

Since i'm trading my Bravox to Ryan i need to get something new. I've got a 2 channel Px600.2 JBL amp which is 180x2 and i have a 06 Dodge Ram reg cab. I think i can get up to almost 3.5" of depth with a 5/8" baffle to mount them. They will need to be able to keep up with 2 Eclipse Sw8200's getting 650w each. The Mpyre set looks pretty nice and they are based about 30 minutes from me so i may be able to get them direct. Any other ideas?

The voice coil wire on my subwoofer disconnected from the terminal. and the Terminal popped off the basket. It is one of those old timey sub terminals like the ones you see on some 6x9's. Any way to replace it or fix myself? Maybe a good solder job? Thanks in Advance ~MadroX

Im thinking about building a box for my magnum D2s which would be about 2.5cuft a sub and the box will be tuned to 34hz. Is that too much? Do you think i need to have a 2.0cuft box tuned to 32hz? Im not doing any competitions, but i listen to ALOT of rap. And i want something that will make my subs pound insanely yet hit EVERY note of bass while doing it. I dont want the subs to bottom out or nothing when the bass drops too low. So is the 2.5 ok or should i reduce it to 2.0. And what about the tuning frequency?

I'm trying to come up with a ported box using the http://www.reaudio.com/speaker_box/LPort_Box_Calc.html, for my MAW-12. I've come up with the following, just wondering if it's right. I've gone to a bunch of other design programmes but they seem to require metric conversions to be made or info I don't see on the specs for the sub. The measurements I've come up with are the following: Using 3/4 MDF, 24X15X15X15, Port 1.5x13.5, with this I come up with a tuned freq of 28.62 which is right around the specs of the MAW-12. Now, the box volume listed is 2.019 feet with this design, is this the net box volume including those 2 extra sheets used to create the port inside t…

Ok, to start off I'll say that I am tired of listening to my stock speakers. They aren't really that bad (well I have nothing that would be "good" to compare them to) but they need some help. I'm kinda working my toward a more SQ geared install. I still need to be able to crank it and watch my passengers cringe in pain and shock, lol. So now that you know what this thread is about I'll now start of with what I have and what I am waiting on and what plans I have for the future. What I have: I have a 03 Ford F-150 Reg Cab. The truck is as bone stock as you get, manual locks, windows, I mean plan as plan jane you can get. I currently have a Eclipse 8445 head unit. I a…

i have been instructed that you can not use multiple mid bass drivers (or multiple midrange/tweets either) because it is not possible to setup proper staging with this configuration. staging being set via the dsp to push the sound stage past the physical limits of the vehicle. is it true that multiple drivers are next to impossible to setup a sound stage on?

The 15s are AUDIOBHAN FLAME EXCURSION SERIES and are 650rms singal 4ohm. Trying to cum up with a box to put in the back of a mini van, there site dose not have the rec. air space, so im guessing around 4 (ft3) for the both of them with a tuning of say 35 ish for her day to day driver. This is not for me, a manager at my work place requested me to do this job for her. YAA or NAA

is it getting closer to the time?? just checking to see if there has been any recent development. getting anxious but patient. Also any box recommendations yet for this killa. thanks

Possible about to purchase a pair in a day or two, curious about what would be a optimal box recommendation and tune for these subs? Just looking for a loud, daily, no comps, just something that sounds good on music. Thanks guys.

I'm trying to find someone that knows excatly what model motor this is, I got this off of a destroyed dd 9515 off of ebay. I'm trying to rebuild/recone it, it has a 3 inch diameter. Thanks

Just got 4 Kicker cvr15's for my wives truck...they are 500wrms and i have a hifonics 2000wrms amp...the problem is that i bought the in 4ohm so a 2ohm load is what i can do...so each sub will get 400w...will i be ok

Recently this weekend me and my friend traded cars becasue mine gets better mileage. he has my old subs in them and this weekend the amp started going into protect mode. this happens on any note lows or highs. my friend says its happened to him before on only one song. but the amp does not get hot it is not clipping or distorted as im running them at maybe 800 to 1000 watts. when i go back to listen to them one sub sounds like it pops then the amp goes into protect. what could that sound be? the song i was playing this weekend was rack city a lot because of its good bass (in my opinion). could i have possibly have torn the spider or the tinsel leads? when i push on sub …

Due to certain events in my life the build with the Chrysler 300 is getting put off, but I still want to have a little more bass in the bronco in the mean time. The only thing I have left to buy for the build in the 300 is two more pm1s, 1 more crescendo 3500, and the wardens. I had plans to sell the Sp4 18 I currently have, and buy one of the Warden 21s. So I bought one of the warden 21 yesterday, but I am having second thoughts considering the warden is more geared towards higher frequencies that what I am used to. Also due to the fact there are no specs posted, and no one really knows anything too helpful about the new wardens. I haven't sold the SP4 yet because there…