Subwoofers / Speakers

alright, i am currently putting together a system in my 99' Mits galant. I am planning on hooking up 2 15" rl-ps hookeed up to a hifonics bx2200d (1800-1900rms). They will be in a sealed enclosure recieving around 1.7 cubes each. They are reccomended up to 2.5 i belive and was wondering what kind of difference i should expect by giving them less air. Of course polyfil will be used to compensate this. I have plenty room in my trunk its just that the opening is so damn awkward i cant fit anymore then this. I was originally oging to get a 15"XXX in a snailshell but could not fit the box, then i was going to get a 12"xxx in a snailshell but said screw ported 2 15" sealed woul…

I'm very keen on buying the Rl-P from soundsplinter, i've heard all good thing about them, absolutely nothing bad. Recently my cousin purchase an idmax woofer, 12 inch one, it sounded awesome, the best sounding woofer i've ever heard. question is, how are the Rl-p compare to this IDmax woofer?? Are they comparable in SQ term?? Price wise, SS is defintely more attractive. So anyone with experience with those two drivers please feel free to post your comment. Thanks in advance.

First off let me say that I love the look of the old SI Magnum especially the Claw basket. The new SI D2 looks ok, but besides looks is there big differences in the models? The new one looks to have less cone area (maybe more similar to a 10" cone and a huge surround.) I'm sure there is a thread describing the newer driver, but how about a comparison? Advantages? Disadvantages? General differences? PS.. The 8"s never materialized .. any future plans for those, or 10"s?? The Hammer

before..... after.... well i had to send one of my 6.5's in to RE so i decided it would be a perfect time to mess w/ these. i had a couple of gouges where the screw driver had hit it. i also added about a 2" hole in the back of each one. i haven't got to here both of them together but from what i can tell, the one 6.5 has as much midbass as the both of them together...

i found this. looks to be pretty nice http://www.diymobileaudio.com/forum/viewtopic.php?t=164

im leaning more of lows anywho i used to be all into systems but now i purchased an 88crx HF (lightest 2nd gen crx model) anywho, i can't go all systems now in this car cuz im tryin to keep its "lightness" so i could still "race" so yeah, im lookin for a good 8 sub, might go 2, not sure

what happened to this sub? and has someone listened to it recently? would love to test it against the MAG or IDMAX or my incomming RL-p

I know that Bob has had the 15 since wed, curious to hear if he got some play with it yet. Along with how the 12 is going. any updates????

I was just curious on the mounting depth of the new magnum and hte width of the magnet. I just need to know these things so that i dont have problems fitting the sub. thanks all for the numbers!

I have 2 mags 15" that is about to be installed in my explorer. Each mag is going to be fed by a hifonics 1500. What kind of box should I build for these two sub? How big and what should it be tuned to. I listen to rap mostly so I was thinking 35 hz but how big should I make it?

Well....As I have upgraded my computer this summer...I have decided to donate my processor and motherboard in an effort to build Nick another computer to work with... So far I have: AMD 2800+ Barton Abit NF7-s Maybe a SB Audigy if I can still find it.. 17" CRT If you guys have a cd-rom/cdrw, hard drive, memory, or anything else that is worth giving to me rather than throwing away or sparing ( ) I'd gladly appreciate it if you could post what you have here...and I will contact you about a possible collection effort... Now...if you don't quite have any computer parts to donate...I will take a MAXIMUM $5 donation for each person if they feel so inclined to do so... Let me k…

OK... Currently I'm running a pair of PPI DCX 12, they've been good to me, I enjoy them, but they don't have a lot of excursion & it seams like they bottom out on me at times... Lately I've been thinking about getting a RE XXX, either a 12 or 15... What would you do?

Installed my Next FLS 6 6.5" shallow mount components today. I decided to install the FLS's rather than the "regular" ALS comps because I have a fetish for shallow-mount designs and seeing how they perform Only have about 30 minutes with them so far.....put them through some tracks I'm familiar with and tossed in my IASCA test disk for a few tracks. Installed them in my doors; mid ran infinite baffle, tweeter in the stock location about 6" down from the sail-panel. Powered through the passives off of two channels of my Coustic DR-514 (50w RMS per side). HU is an Eclipse 8053. Low end is taken care of by a 12" Rl-p. First impressions: Tonality is pretty darn good.…

i've been pondering getting rid of my rl-p's in a search for something louder. i need some suggestions on what to do. i was either thinking 2 different 15's or a single 18. i've got ~1500 watts @ 1 ohm. what would you suggest?

first... i couldn't move the pennies on my roof very well, cause it's so small, but i can get stuff moving on the carport! i thought it was kinda cool :crazy: second is my polk db 6.5" running freeair of my house reciever getting about 25W http://www.realmofexcursion.com/brands/polkaudio.htm#db651 second is my RE 6.5 of the same reciever http://www.realmofexcursion.com/brands/reaudio.htm#re651

How much could these handle for burps, and are they comparable to an SX for SPL? I have been offered a trade on my SXs for his Claw basket Mags. 2 12" for 2 12" Also I am burping with 6000w+

okay, so i got my XXX 15 in a couple days ago, i had it in there good running off my viper, 1 problem, is my SX moved more than my XXX does, so i thought maybe the XXX needs more power, or maybe it hasnt broken in yet, so i got my PA a3000db in, this adds in more problems, for some reason the amp isnt doing something right or i havent set the "extra complicated" 3 knobs, wow you match the gain which i did 1800 x 1 then square root it comes out to 42.4v, so i set it there, but it isnt as loud as the viper was hardly, its not really much louder if any, but the lowend is gone and for some reason i have more midbass now, so wtf, it used to hit some notes with my viper, but wi…

When will u be postin that u can buy the subs today, since u said the sale starts on monday when does it start today?? and do i order it online or do i have to call the number provided?

I am looking to build a ported box for a pair of rl-i8s. The maximum trunk space I can give up is 37.5x16.5x8.5. Can I build a ported box this small and would these subwoofer be good for this setup? I am also considering useing 2 or 3 Crystal CMP8s. I am looking mostly for SQ but want those extra low tones a ported box can give. Thanks

I'm thinking about getting a 15" while the sale is going on. What are the wiring configs for it? dual 2 ohm, dual 4 ohm dual 8 ohm, single 4 ohm? Thanks

I was thinking about getting 2 15" D2's, with the sale and all, and just wondering if anyone knows if I'd be able to fit them in a 03 mustang without taking out the rear seats or MAJOR madding to the trunkspace (any cutting of metal). I was thinking of taking the floor off the trunk and moving the spare, and using that space to house them, anyone know for sure if this would work? I was considering just getting 12's, but I like the "wow" factor of the 15's . Any help would be greatly appreciated...

I have a 12 spoke SI D2 and right now it is running in a sealed enclosure and it is not suiting my needs. I was told if I ported it, it would be a whole other sub. Supposedly sound incredible. Just wondering if anyone could help me out with some box dimensions for a ported enclosure. THe best way to get ahold of me would be to email me at [email protected] Thanks Adam

I was on sounddomain.com reading a thread on the XXX subwoofers and how people were building these snail shell boxes for them. They were saying how the sub got crazy loud and its the best ever. Has anyone here put their sub in a snail shell and listened to how it sounded? Anyone got plans so I can try this?

sorry just had to post how damn psyched I am now that the announcement has been made about the new driver sale. I knew it was coming any day now it had been too quiet around here. So now to just figure out 2 things: 1) how/where the hell I am pulling the cash out of my ass for new sub(s) after vacation next week. (hehe... it can be done) 2) do I stick with a single 15??? dual 12s??? or dual 15s???? but of course the whole point of this thread is... NEW SI SUBS ARE SOON TO BE HAD!!!

Does anyone know why ID never made one of these? Its seems stupid that they havent, seems like it could have been a good money maker if they would have done it years ago when they made the 10 and 12.