Subwoofers / Speakers

Found two sa-10s in ported box for 300, not even broke in yet. Is this a good deal?

This is one of my Fi X 12's that I've recently burnt the leads on, and I'm in the process of repairing it. Its hard to see, but in the last pic i have the tensil leads unsoldered and the copper leads from the coil ready to be soldered to the new tensil leads. I paypaled the money for the leads and dustcap to Fi so now im waiting for them to come in!!

Ok so I was moving some stuff around in the shops storage to make space when I found this I know it

I'm looking to upgrade the midbass performance in my truck, while still blending in with the rest of my equipment and sounding good. I know I will not be able to keep up with my substage ever, because I am a basshead, but thats OK with me. I was looking at a set of the Peerless SLS 8" drivers. They would be mounted in my doors, right next to my set of Pioneer PRS C720 component speakers. Door will be sealed and deadened. I have around 150-200 watts available per channel for just midbass. I'm running stereo with no rear fill. I don't have any external processors but I have a P800-PRS head deck with the rear channels unused. What would I all need, and need to do setup…

hi i need help finding a good pair of 12s subs. my budget is about 500 dollars for the pair. i got a 03 mustang so i dnt got that much room for a big box maybe 2.5 for each sub space. i got 2 hifonics 2000 watt amps a kinetik 2000 battery. i listen mostly to rap music and i like to crank it all the way up till my ears hurt. if u guys can give me some ideas it b great. i was thinking of re audio sxx or fi audio bl but dnt really know about them. or if u guys know better subs let me know. thanks

Which glue is better to use on recones, the CA glue that comes with some kits, or 15 minute epoxy. Apparently FI doesnt send ca glue with a recone kit, they told me to use 15 minute epoxy. Thanks

hey does anybody know where to get baskets, motors, cones, and coils? i know there are companies over seas that are cheap. does anybody know of a place i can order stuff?

looking to get some nice midbass+highs, looking to upgrade from my infinity's was looking at the cheaper cdt audio comp sets was thinking of getting a 6.5" comp set and a 4" comp set so 2 6.5's 2 4's and 4 1" tweets i would put 1 of each per door and then 1 tweet in each front window pillar or next to me in the verticle pillar by seatbelt would that be a bad idea? too much tweeter?and could i wire two 4 ohm crossovers together for two ohm's? so 2 crossovers per channel

Nevermind sorry Mags gonna be out of commission for awhile.... Or perhaps I can give her about 400 watts to get me by. Jordan

whats up guys, been debating on what sub/amp combo I wanna go with, thought I decided on 2 soundsplinter 10's with an alpine pdx 1.1000 amp, but then I realized I might not want that much bass.. I listen to probably 75% rock, 25% rap, I want something with great sound quality, but I guess when necessary I wanna be able to turn it up and feel it when I listen to rap.. dunno if I should go with 2 10's, one 12", or maybe one REALLY good 10"... I have heard of subs like the JL 10w7 sounds really crisp, but when you want it to be loud, it can sound like 2 12"s almost.. what sub does SS, SSA, etc make that would be the equivalent of the 10w7? You think in my case one really so…

ok so ive had my comps in for about a week now and today i just now noticed that there are holes in the door from the stock speakers.Would that be messing with my sound quality at all cause there are like 4 holes around each mid????

I need to find a negative push terminal... The original wearer of said broken terminal was a diamond d1, I am not worried about it matching, unless Scott, or when I call heather at TC sounds will only sell them in sets. I snapped the terminal right off of the basket, but they are more of a bolt through design than actually being part of the basket.

After doing a little reaserch and a unexpected blow to my savings, I think that I am going to go with a set of Alpine type-R components in my mercury sable. a store i went to was askin 250 for the set not including install or anything, I found them online for about 150, and i can do the install myself. my question is,"are these speakers good enough to run a front stage setup?" I would rather not have any rear speakers in the back deck, alowing my subs to breath into the cabin, but im not sure if the alpine components,(powered about 60 watts RMS into each,) can hold thier own... any thoughts?

Hi all, I have a 2007 Hyundai Elantra GLS and am looking for some components to compliment finish up my system. I currently have a 1 FI Q 15 (3.5 cubes, tuned @ 33Hz) Sundown SAE-1000D Alpine CDA-9885 Can anyone make any recomendations?

has anybody owned these subs? I just bought a 15" and put in a prefab ported box, gets loud but not low enough.. Is 35hz a good tune?

I have two blown MA Audio MA83XE's (8 in. subs) and i completely took them apart finding out the the voice coil of course, was melted. I measured the diameter of the voice coil from gap to gap and its 1.5 inches, is it possible to make use of these old motors/basket? or are they completely done for? If anyone has good advice on what to do with them, your advice is much appreciated. Thanks

http://www.crutchfield.com/App/Product/Ite...P680&tp=105 i was thinking of getting something like this...maybe not this particular model. i know bostom makes a speaker like it.

I want to upgrade to 1 18 that will be louder than my 2 15's Memphis PR. I was looking at BL, BTL, AQ3, Mach IXL, or maybe even DD but I dont know the prices on those

Well I am currently laid off work so I told my wife I would add some bump to her ride. Seemed easy enough at the time. Then I started shopping around, and now I am losing my mind. I have looked at so many subs I think my brain is going to explode. I'm just wondering where to start. I would like to run 2 12's ported if possible, if not Ill drop down to 10's. Rough dimensions are 32Wx15Hx?. I can probably go wider, but just a starting point. I decided I will build a box for the first time so whatever I go with hopefully someone can help out with a good box design, or point me in the right direction. My wife will be happy with anything, she heard 2 12" cvx ported and …

I am going to build a fiberglass box that fits under my rear seats. I can fit 10s or 12s. I will probably have 2cubic feet before port and sub displacement. I was thinking of doing 2 mach 5 ixl 10s ported, or 2 diamond d6s. i currently have a 10w3 sealed powered by a 500w alpine and its not cutting it. Im looking for subs that get really loud but still sound good. I mostly listen to rap but would like something that sounds decent on all types of music. any suggestions? its going in an 03 ram quadcab. thanks.

I listen to a wide variety of music ranging from house, deep house, electronic, metal, alternative, rap/hip-hop. Vehicle is a 2003 honda civic coupe.. sub in the trunk. Stock electrical. I have a friend with dual Kicker L5s running at 1000 watts total with his factory Durango infinity audio system..I'd like more output and more sound quality than that. The entire car has already been deadened with Edead in the trunk and front doors. I will never be competing in any competitions, but I would like accurate musical reproduction with a bonus of great output. Ideally my budget would be < $1000 for sub/amp/front stage, whether it be 1 sub or 2.. and remember I've already got…

how good r these speakers.

Just got 4 Kicker cvr15's for my wives truck...they are 500wrms and i have a hifonics 2000wrms amp...the problem is that i bought the in 4ohm so a 2ohm load is what i can do...so each sub will get 400w...will i be ok

if i have my system at 1 ohm, and my rise is 5 ohm and up, does that mean that i could run 1/4 ohm setup? and how much ohm rise is efected by voice coil heat?

nvm