Subwoofers / Speakers

I have been trying to search this forum for info on this sub but i can't find anything so i just started a topic. I am looking to upgrading. I currently have 2 12 inch pioneer champion pros. (TSW3002d4). I just came across the Sundown Audio x-12 and watched a few youtube videos. These things look like they will silence my pioneers. I want to know if anyone has seen them in person and what they think about them. The amp I currently have is Hifonics Zrx3000.1d

Well right now my mag is in a 4.0 cu ft box tuned to 28 hz. Its nice and clean and gets pretty loud but I want a lil more SPL out of it. I heard if I tuned up around 35 hz it would get a lot louder but my question is how much sq will I be losing? I really dont want to lose too much sq but want it a bit louder. What do you guys suggest?? And in what kind of enclosure did you get your best results?

Hi all, thinking adout useing two T3 Audio Ts 12s412 for spl, before I buy them I need some feedback. Thinks for any help.

Next week I'm getting install, Infinity 6x8's in the front (componets with external tweeters)Infinity 6x9s in the back, 2 Fi Q 15's, in a sealed box @ 5.2 Cubes The roof will be dynamated the Doors are gonna be dynamated and a 7 band Eq somewhere either in the glove box or console, Anyway Anyone have these Infinitys? I have 7 infinitys in my barracks My question is They will be powered off a cheap sony amp tell my Soundstream TRX 4.420 gets in. If I have the Soundstream's gain turned down will I have any clipping, the componets are references rated at 90 watts rms @ 2 ohms the amp puts out supposedly 105 watts rms the 6x9s are rated at 110 watts rms I just dont want any d…

Hello forum! I'm fairly new to car audio and even newer to this forum in particular, but there appears to be tons of great information here from numerous people with years of car audio expertise so I figured I'd start here for help. I am wanting to upgrade/modify my current subwoofer set up to create a cleaner appearance in my vehicle and perhaps increase the "loudness" factor as well. I currently have 2 RE audio SR 10's running at 2ohm's at roughly 1200 watts rms in my 96 gmc sierra. The box has been placed where my center console used to be and I really enjoy it there as it allows me to keep most of my backseat. What I'd like to do is replace the 2 10's with a single…

I need a recone kit for a Sa d4 15 750 rms

how many cubic feet for an icon 12 and a 15 for a sealed box and what is the mounting depth on both of them

Twins

well my subwoofer fund for a 15 went up to the 300-350 range cuz i dont wana be dissapointed, and i was wanting to know which would sound better and still have mad bass between the aq hdc3 and the fi bl ran off a hifonics 1600d? in a box at 4cubes and hopefully 32hz if not 30hz. and input will be greatly appreciated thnx in advance ~Bill

Anybody have any experience with these? I thought about trying them about.

my friend wants to know what will be the best option to go with he said he wants it to be loud and low i told him go sealed but i dont know what else to tell him we have the same car 89 caprice its down to three sealed or two ported 15's and i also know that a lot of people not a big fan of sealed boxes so can i have a options and opinions please

I have this old audiobahn 12in sub i wanna rebuild does anyone know where I can get a recoil kit for a 12in Aw122 Audiobahn 550watt subwoofer at

I sold my old system to a buddy back in my home state. It's a Fi BTL 12" (2nd gen) on a hifonics brutus 2610d. He called me last night saying that he hadn't played the system in a little over a week, but when he got back in the car, the sub was hardly playing, but would occasionally kick back in for a few seconds. He said the amp stayed on without going into protect. I had him check his Subwoofer HU setting, check the RCA's, and the speaker wires connected to the amp. He said everything looked to be fine. The only thing that I can think of is that a wire came loose from one of the coils in the box and the sub is only seeing half power and only on 1 coil. Any other thought…

when will the 327s be available, or on the site? I am interested in checking them out. How much wil the run? and what size are they?

ok this is a pretty newbie question. if i have 2 12s in a ported box and the recommended enclosure for one is 2cu ft after displacement, would i still only need 2cu ft after the displacement of both subs or another 2cu ft making the total 4?

because I'm a noob to active setups. So I'm trying to plan out an active two way setup for my Tahoe. My question is can I use any speakers I want? I'm used to buying what is packaged and put together for me and now I'm swimming in possible options. I see all the Morels ,but none are the ones for the car setups, then there are seas and ScanSpeak and peerless.........Do they need to be made for car audio and what are things I need to look for in the graphs and such. I have no way to demo all these options!

???? al

I blew one of my focal tweeters when my amp popped/blew and need to find a replacement. I really like the inverted dome TNB tweeter that came with my 165VR's much smoother and not harsh like all of Focal's other tweeters I am just replacing them I don't want component tweeters I don't want harsh tweets can't handle the piercing highs. What do I get to replace it/them. Going in an Escalade not stock location I believe they will have to be 45mm tweeters I really don't want to redrill. Not too expensive less than 100$ preferably 130$ max. Thanks for your help

I am a new owner of a SI D2 Mag 12" Version 2 subwoofer. I need help with a box. This sub will play 65Hz and down and will be powered by a US Amps 900Watt at 12 volts amp. My car runs at 14.6 Volts. The rest of my system will be this. CDT ES520's in the kicks 150 Watts. CDT EF8's for midbass on the doors 300 Watts. The ES's will play 250 Hz and up. The EF8's will play 65Hz to 250 Hz. The SI sub will play 65 and down. Everything will be powered by US Amps. I am a SQ guy, so at first I would say I am looking for a SQ sub box design. However I have to ask , if I have 8's up front doing the midbass, and the SI sub is only doing 65Hz and down, will SQ even matter? …

I am ordering 2 Maw-15's and I heard that the U.S. Amps XT2000D is a good amp to push them with. so I was wondering If I could get a deal on the subs with the amp? As a package deal. Thanks in Advance. ~MadroX

hey guys! I have your typical question for sub comparions again. Im looking at comparing the DC Lab LVL 4 15" subwoofer vs. 18" BL Here are the specs: I have a maximum of 5.5ish cu. ft possible for the subs. I'd run the BL in 5.5 cu ft and the LVL 4 in around 4ish maybe tune them to around...35Hz or so. I have a JBL BP1200.1 to power them. So around...1100 to 1200 watts per sub. The BL would be Fully loaded for daily driving. what do you guys think would perform better in comparison to SPL ouputs? Im thinking the SQ will be around the same maybe? lemme know if you guys have any ideas! I know the sub comparisons are always hard because of all the variables

whats the difference between the lvl4 coil and a lvl 5 coil on a dc lvl 4 18? im going to be getting 2 lvl 4 18's and a sundown saz 3000d

I'm looking at getting one of these. Is there much difference between the V2 and V3?

I dont have a dustcap does any one know where i can get one? Ive looked n looked but havnt found one

What do you guys think of Diamond audio for component 6 1/2'' s? Also about there 12'' subs?