Subwoofers / Speakers

I will be running my new sundown 1200D that I got from the preorder The deepest sub I can go with is 6.5 so Im thinking Id get with 2 high powered 10s. But they will probably only get .75cu ft per sub What subs would you all recommend?

looking at revamping my current build in the next few months. im gonna wall off the truck and have about 8-10 cu ft to play with for volume after the port. ive been looking at doing several different driver combos such as 8 10s or 2 18s but open to any other combos people have in mind. gonna keep running the 3500d v2 i have now. i wanna stay around the $1k or subs, and i want to tune around 33hz. going to be a daily driver with some competition use. ive been looking at IA DPs, NSv2s, Zv4s, PSI platform 3s, fully loaded FI BLs,and AA mayhems for 2 18 combinations. i dont think i really have enough space for xcons/zcons. havent seen much in the 10s area i wanna run yet.

Yes hello im new to this site but i find it very interesting and helpful luv it my question is if anyone can help me is this . I have 2 15 inch kicker l7 @4 ohms each sub has its own amp us amps md1d 750 watts @ 2 ohms im trying to find out if i can make the subs play at a lower ohm such as 1 ohm without hurting them or is there any other way to get the most out of them i have the amps strap together. Thanks for all the help mrcrown89

I'm having trouble finding info on this particular sub. I have searched a bunch of forums and tried Googling, also. I'm not real sure weather it is a tc9 or tc7 based sub; and knowing the many variants of those models left me skeptical of considering an appropriate sized enclosure based on another sub. I originally figured this is a TC9 variant, so I've been planning a ballpark figure of 1.5-2 cubes net ported to 28-30hz, using a 4-5" pvc port . I'm looking for a flat response, with as much extension as I could get. I'm mounting mli-65's up front as dedicated midbass drivers; and plan on them mating up with the sub in the 60hz area. The power will come from two bridged …

Hey Im New To Your Guys Forums But I Have Been Researching These New 3XL Subwoofers From Powerbass since december of 2005. Have A Few Questions For Anyone To Answer. 1. Where Can I Safely Buy These From? I have checked out audio-warehouse.com but noticed there is no authorized online dealers for powerbass. I contacted powerbass and am waiting for a distributer call my back with my price from arrowhead distributing. His Name Is Doug. I was looking for the prices around what audio warehouse has. 2. Whats All The Noise I Hear About The Speakers Breaking Within The First Few Days? I Saw In Another Post That There Was a few problems with them breaking…

how does it compare to other subs in its power range? ex. re se.....

Does anyone know the actuall physical dimensions of the crossovers for the 302's? Or the 327's for that matter. I have a piar of 302's ordered but am thinking about switching to the 327's if I get am email back from Nick. I am currently beginning work on my amp rack and would like to know the dimensions. Specifically the l x w. Anyone help out here? I know a few of you guys have the 302's. Maybe Sundownz or Nick can throw out the dims for the 327's. Thanks, Jim

Its for spl only. I have about 6.5 cubes to work with, its for 2 15'' d2s. I want it ported and tuned to 45 hz. i want massive port area and have 14 inches of depth to work with. Any help will be appreciated, i want to put up some big numbers for SI!

I'm pretty much set on what I want to get. 2 Mach5 IXL 10's 1 Phoenix Gold RSD 1200.1 Ported Box tuned to 34 or 35 Hz Each sub will be getting 600 Watts rms. Is this a pretty good set-up for a good amount of SQ and loudness(Right now I have 2 12" Memphis in 2 supersmall wedge enclosures(Sealed) and 300 watts total) ? Another question about the box. Should I put both in same compartment or each in sperate compartments with their own ports.?

Looking for a good link on how to make a fiberglass enclosure. Anyone have one? Thanks

I just bought a used Sundown Saz-1500d. For the moment I will be running it at 2 ohms with my dual 4 ohm voice coil DD2510. Within the next two paychecks, I wanna get something that will take the full 1 ohm power of the 1500. I am leaning towards a 15", but a couple of 12"s could be cool also. Just as long as I can wire to 1 ohm and get the full 1500 or so watts. -This is a daily driver, but if I can potentially get loud enough, I would maybe compete in street beat or similar. -budget is a $350 ish (used or new). less would be nice. -before installing the amp, I'm adding a yellow top in the trunk and one run of 1/0 for it. as well as big 3.

Hey guys, anyone happen to have the t/s parameters of the Ascendant Havoc 12" in dual 1 ohm coil config? I got them at the end of the summer of '08, so they have the new cone, but they are not the new Dual 2's obviously, so I can't use the same t/s to design an enclosure for them . Thanks guys!

Alright, the other day, just messing around with my subs(SWS-1023D's in a "folded horn" box), i decided to run one of them reversed with the other one regular. also in my adventures, i placed them in the far back of my trunk facing(subs and port) towards the cab. I was suprised when i cranked the music and heard not only an increase in SPl but also a better SQ . Now being the Noob that I am, im curious to why this resulted like it did. i tried searching other forums but failed to come up with any useful information. and if it is a simple explination, why wasnt it set up like this when i had installed? Thanks for any and all comments

i know the recommended power is 100rms but are these speakers still thirsty for more?

Right now I have an Icon 15 in 3.5 cubes tuned to 34hz being powered by a JBL GTO 1201.II amp that puts out 1100 watts at 2 ohms and it sounds good. How would a FI BL 15 sound in my current box with my current power? I know they get louder than the Icons but do they sound good? If they have decent to good SQ I might want to swap in favor of more output, that's if my amp and box would even be good for the BL.

Does anyone know if boston acoustic pro 60's are too deep to fit in kick panels in a large suv? What do you think about kick panels verses stock door speakers.

I have a Toyota Auris (it is the new Corolla hatchback) with a little trunk. Here is my setup : hu Pionner 88 prs, speakers : focal 165KP (fr) and Davis Acousticscvt130(rear)on a Boston GT42 amp. sub:Kicker s15L74 on a Jl audio A1800D amp. Secondskin deadening,...... My sub is in a 4 cu ft sealed enclosure; and I really like the powerful output, but not so much the quality. I want to save some space in the trunk; I need a sub that can play very well in a 2 to 3 cu ft enclosure. I found the SSA Icon 15 or the FI Q 15 on the web, and think they can be good for me. Do you think I will be satisfied with one one them? I listen to a lot of reggae , dancehall and rap :I like hea…

Well, just got a new demo vehicle for the business. A 04 Alero....yeah sounds like a grandma car but its the coupe and is quite fun. I hope it has a good alty that can handle the system. But the trunk it kinda small. Any idea on how to mount the subs in order to get two 12in subs in there or should i just stay with one 12?

Im just curious if i get 1 15" mag what components should i look at? that would compliment the sub well.... what if i got 2 15"s? I have alpine coaxail and eclipse coaxails in right now.

here goes! I am just currently planning for my future audio set up. here is my current set up. I currently drive a 2005 Scion Xa. 160 amp H/O alternator. It has all knukonceptz speaker wire, rca's and distribution blocks. 0g big 3 upgrade and 0g power and ground wires. A Panasonic CQ-C7205U head unit. I run an Alpine PDX 100.4 for my infinity reference components in front and coaxials in the rear. 2 Elemental Designs 13Ov.2's dual 4 ohm subwoofers in a custom 2ft3 sealed enclosure. they are 600 watts rms each, and I have them wired to a 1ohm load. I have I don't know how many feet of edead v1se sound deadening in my car, from my firewall all the way to the back fenders…

I have 2 Rockford Fosgate rfr3110's and Im planning on building a ported box for them both but I want to know the difference between separating the 2 subs to one sub per chamber (2 ft^3) with 1 square port each OR having both subs in the same chamber (4^ft3) with 2 same sized ports. Basically, I have the size and dimensions of the box ready to draw up, but should I have a divider between the 2 subs in the box?

some effects of the glue ....

I'm using a stealth enclosure that holds a single 10". Mounting depth is 8" and has .75 cu.ft air space and is sealed.I listen to all sorts of music,rock,rap,r&b,metal,etc. I have looked at the following subs...Alpine Type-R 1042D(sounded good),IDQ v.3 (haven't heard) and Re Audio SE-10 (haven't heard).That 's mostly where the problem lies,I don't have any dealers locally that I can actually listen to these subs. I already have a MB Quart Discus 500.1( 250W x 1 @ 4ohms, 500W x 1 @ 2 ohms) that I picked up a few weeks ago for cheap.Would like to keep it under 150.00. Thanks

http://www.powerbassusa.com/products/xtrem...erencecomp.html

Anyone have any experience with is sub? I know that TC just start back up recently but was hoping to get some info on it. What size ported box would be optimum for this driver? Will it be able to handle an AQ2000 am or will that be over-kill? How does this driver compare to other drivers you have used. Is it more SQ or SPL geard? Is it durable in terms of extreme daily uses. How accurate is it? Am wanting to know anything about the sub that is out there right now. I tried accessing the site but got nothing. Thanks