Subwoofers / Speakers

Currently deciding between an 18" Bl or an 18" RL-P.. I am basically looking for just a loud daily driver that will pound the lows. I have 1500 watts on hand to power them.. What could I expect from each sub, and how do they compare?

Since some of these Manufacturers have forums on here, i thought i would ask Looking for 4 12s, ~1000rms to each sub, 7cubes @34hz box, cheaper the better, not spending 350-400$ per sub, need Dual 2's Ive never used any of these, so im reaching out for people who have, i dont want to under power any, but i dont want to run into problems with them getting stinky after 30secs, not super worried about the meter, just going to be a clean sounding daily driver Taking out the wall and doing something smaller, Amp is t40001bd 1) Incrimnator Audio Li - will 4 of these handle a RF t4000 daily? 2)Incriminator Audio Death Row 3) DC Sound LVL 4 12s, im really liking the DC's, just wa…

Well Ive Gotten used to my system already which is 2 HDC D1 15s...I wanna do 4 12s now (anything but Kicker) Any Recommendations??

I have DB drive S5 6.5" comps up front right now and my Sony coaxials went out in the back. So I was thinking on moving my DBs to the back and getting some more comps up front. What comps would give me the best clarity for around $150 or less? I have about 50 watts per channel right now but plan to upgrade my amp later.

I have a 2005 Toyota Tundra 4 Door and the only thing that you can fit are 8" subs. I was looking at the Kicker CVR 8's and I am probably going to get those because nothing has a mounting depth smaller than 4.5" inches. I was really really considering the Ascendant Audio Assassins but I just recently found out the mounting depth is like 5.1" or something like that. So please help me with what 8's I can get in there, I want something pretty loud. I have friends wtih like 2 12's, and most of them have 2 10's....not really loud 10's or 12's but you get the gist. I have mostly only heard of the basic brands like kicker, jl audio and those types but let me know if you know any…

Im looking into buying two of these american bass 12's for $400 The guy says they are D4 HD series Problem is: american bass dont make the hd in d4 (idk about the past) Im trying to see what kind of sub it really is, if its the xd thats a good deal any lower series its not a good deal hes going to send a pic of the back of the magnet in a couple hours after work which american bass sub is this? heres a pic he sent me thanks

Ok Im looking on getting my amp for my door speakers.. I only listen to rap and NOTHING else.. I plan on using the Mach 5 Audio MLI-65 They say they are 100 rms at 4 ohm? Now the question is, Cud I wire them up into 2 ohm and just use a two channel amp ran at 2 ohms? Or shud I just buy the four channel amp and run them at 4 ohms? My amp choices that im stickign with are.. Rockford Fosgate T4004 Does 50 x 4 @ 4 ohms and its under rated.. Or.. Rockford Fosgate T3002 Does 100 x 2 @ 2 ohms and its under rated.. Not sure which to choose.. And are those Mach 5 Audio speakers straight speakers to run? And other suggestions im open to but Im sticking to Rockford Fosgate for the …

hey guys new to this site and new to car audio and i just bought 2 mj-18 svc 4 ohm and i want to know what amp out there is the best to push these subs i want something to give them 700 watts a piece or more if they can take them dont really know alot about the car audio game so all the help i can get will be great

my buddy is getting rid of his 4 12" L7's and wan't to get 3 15"L7's.. but the amp he has is 1ohm stable and he wont get full output with that amp cause 3 dvc 4ohm subs wired in series can only go down to 2.6 ohm load!! so which amp would you guys reccommend at 2 ohms? the amp he has now is the hifonics brutus 2600 or 2800 not 100%sure! not sure on his budget but i believe he doesn't care!

hey, i bought a fi bl 15 with the flatwind, cooling, and daily options. I am tryin to decide between 2 amps. Rockford t1000-1bd or t1500-1bd. They're both the new '09 edition. any suggestions? thanks

Hey everyone! So I just purchased some of NVX 6-1/2" V-Series 2-way components since I wanted to give them a try. Looking into a new amp for just these speakers only. Curious what you think about these two amps? There around the price I want to spend and I am not 100% on sticking with this brand, but ive had good luck with these amps over the years so I figured I would stick with them. Here are the component specs: 6-1/2" V-Series 2-way Component Speaker System Peak: 280 watts per set / 140 watts each side 140 watts per set / 70 watts each side 4 ohms impedance and here are the two amps im looking at and curious which one would work…

Ok i'm buying 2 15 xxx subs. I need two amps to run these beasts. I was thinking about Hifonics Brutus 1500d or something like that? Does it actaully put out 1500 watts? I also thought about gettin 4 Memphis 1000d's and running one amp to each sub? Let me know bro's?

Got 2-12" Lethal Injections coming. 600W rated rms, they'll be getting 600Wrms ea. @2ohms. Displacement .13. Sealed or ported? Flared or rectangular ports? Internal volume? Two chambers or one? Does port size determine tuning freq.?

which brand do you think is better in subs Kicker or MTX.

I friend of mine is doing a budget system and wants some good coaxle's. He just wants a pair of 6x9s for the rear and 5 1/4s for his front doors. I had a pair of 3 way MTX 6x9s back in the days and imo they gave me pretty good highs. Who else makes good quality coaxle's? He's going to power them off a Alpine CDA-9886.

Well I am not sure what I want here. The level 5 15" woofer can come with several different type of coils -- d.7 d1 d1.4 or d2. If I get d2 then I can wire it to 1 ohm, but then why not just get the d1? Or could I not wire that to 1ohm and it would be pushed to .5 ohms (which I would not prefer doing seeing as SAZ are unstable below .9 ohms I believe). Oh and I am using a SAZ-3500D on a single level 5 15"

lately i've heard quite a few bigger name companies have used various TC sounds motors on their own sub lineups, and i'm wondering, is it possible to salvage the motors (and baskets?) to recone these subs? If so, which models should i be looking out for? I know Eclipse used some in their Ti and 8200 range, and Lightning Storm, Ground Zero etc, but i think Eclipse are going to be the easiest to track down. Also, who can recone these, and to what size? I've found that Fi can recone them in this thread, but it looks like their baskets arent a great fit for most motors. Any help appreciated guys

Right now am looking at using a pair of components up front and a pair of coaxial in the back (Ext. Cab Dodge Dakota). So my question is which setup would be best for sound quality: 1) Audioque AQG-6.5 Component Set and Focal Access 165 CA1 = $350.00 total 2) Focal 165 A1 Component Set and Focal Access 165 CA1 = $450 total 3) JL Audio TR650-CSi Component Set and JL Audio C2-650x = $400 total This is what i came up with, just need to know which set these would do the job. I also have the power to use any setup.

Of these, which would you prefer? Will be running 2 sets on the front of my DLS Ultimate A5. Wont be a ton of power so it will definately need to be efficient. I would like clear sound, good midbass, and definately as loud as possible. This is the rating of my amp, and with 2 comp sets each channel will be at 2 ohms, so around 50rms per speaker. 4 ohms: 85 watts x 2 chan. + 300 watts x 1 sub chan. 2 ohms: 100 watts x 2 chan. + 500 watts x 1 sub chan. These are some of the options I was looking at. What would you pick? Speaker choices and poll us up at ca.com. http://www.caraudio.com/forum/showthread.php?t=410377

I'm looking for something that sounds good but doesn't break the bank. They will be getting 50-60 watts per side. Zapco i-6.2 http://www.woofersetc.com/p4965/i62--Zapco-65"-IForce-Component-Speakers.htm Image Dynamics CTX65CS http://www.woofersetc.com/p6201/CTX65CS--Image-Dynamics-65"-Component-Speaker-System.htm Or if you can recommend something else better in that price range. Thanks

Hey guy, am putting together a system for my ride which is a 2003 dodge Dakota Ext. Cab. Am planning on running 2 12" sealed in a 2.5 cu.ft (Net) enclosure because am a big guy and I don't have the additional space to go ported. Am debating whether to go with the Incriminator Audio LI 12 or the Sundown SA-12. I will be running the Sundown SAX or SAZ 1200D amp. Am done with the Big 3 upgrade, and am using a UPS12-490MR battery to power my vehicle off of a stock alternator which is around 130 amp @ 3000 RPM, hopefully this will be enough to prevent dimming. I haven't had any subwoofer experience with any of the 2 brands mentioned but from what I have read, both drivers a…

So I'm about to build my second sub, but I'm stuck on which dustcap to use. I originally ordered the Carbon Fiber dustcap, but ended up getting the Poly dustcap as a freebie with an order I made. After placing it on the cone just to see what it looks like, I'm starting to wonder if the Poly dustcap actually looks better? What do you guys think? Go with the Carbon Fiber dustcap, or the Poly dustcap?

I can't decide, I'm gonna run 2 18" Fi's but which ones and with what options??? It will be driven everyday and i like to play them loud. I will be running them at 4 ohms with 1000 Watts to each one. I want it to be loud but would like for it to be accurate as well. I listin to all kinds of music but mostly rap, If anyone has any suggestion on which series and with what options let me know, its gettin down to the wire and I need to make a decision.

I'm reconing my XCON. I was going to have The Speaker Exchange do the work, but after they told me $80 an hour for labor and it could take 2 hours I've decided to do it myself. Problem is I didn't order glue from SSA because I wasn't expecting to do the work. Does Lowe's or Home Depot sell a glue that would work? Thanks

i have noticed that The new RE subwoofers like the SR, SE, SXX are badly built unlike they where before.. correct me if im wrong but RE subwoofers are now china made but parts still came from US.. if i where to compare products in general.. i would like to know your opinion about these.. which is a better brand in general terms and application.. RE vs FI? RE vs SunDown(subwoofers)? RE vs AA? fi sundown and aa seem to have the same built for that subwoofer.. they have the element of just by looking at them you knw this sub is loud..