Subwoofers / Speakers

has anyone done an maw 15 Infinite Baffle and if so was it good i was curious about doing it in my 2001 kia rio and was wondering the proper way to do it and help would be great thanx

Going in a 99 Yukon Denali...more of a musical setup. Ive only built one box prior to this one and wanna do this one right....any input would be appreciated! Max dimensions are 48" from back seat to back doors and 48" wide between wheel wells Window level is 20" Backseats are 22" I was shooting for something thats not too crazy high above my window line but I'm open for any and all enclosure designs here.

I have a Soundstream Reference class A 10.0 amp and 2 Rockford Fosgate P4004 Amps to use in my 2012 Tacoma access door truck. I want to put a 8 inch woofer in each back door I want to replace the (6x9) speakers in the lower front doors and replace the tweeters in the upper front doors. So what would work best with my amps? Total I need 2 (8 inch) woofers for the rear doors : Brand ? watts RMS ? 2 ( 6 x 9) speakers for front lower side doors: Brand ? Watts RMS ? 2 ( 3i nch) tweeters for the front upper side doors Brands ? Watts RMS ?

im curious if anyone has any experience with bravox subs, or have heard anything, ie quality and service thanks.

I'm wondering if I should pick up one for my home theater setup and throw it in a sonotube. Anyone have expierence with these and have used them yet? I'm wondering if the 8" would be sufficient for my room setup. I have ~240w to work with. Thanks! Quick Responses please lol

Hey guys i need help with building this box so i get the right air space . The dimmensions i have for space is 25 long 13.5 tall and 16 wide. I am going to put a ssa gcon 15d4 sub in there. I want it to look like http://s1150.photobucket.com/albums/o603/Fordman321/?action=view&current=subbox.jpg. Its just a crappy paint scetch but you get the picture haha. Any help would be awesome Thanks JD

Any one a supllier of sundown sub in Philippines..

Ok, lets dispell some myths about speakers. I figured we could have a small list of the different ways you could "blow" a speaker and have a little technical explanation to go with it. I also want to talked about clipped and unclipped signals and thier effects on a speaker. Ways to blow a driver 1. Degrading of materials This one is plain and simple. Speakers get old. Typically when a speaker gets old the surrounds go first, especially in stock speakers. most surrounds are made of a foam or rubber and time, heat, sunlight (common in dash mounted speakers) cause the materials to degrade, and then when you play them again they fall apart. 2. Thermal Limits of a driver When …

I can't get a lot of info and no reviews for this pro audio speaker i guess because it's new... I currently have a sundown 100.4 and a set of ID components rated for 100wrms per side. I want to bridge my components to the sundown 100.4 but i'm sure it will kill them due to too much power.. Question is- If i purchase these pyle pro PNDW6 6.5s, where do i look at replacing my current crossover with a new one so i dont burn it up due to too much power. I looked on partsexpress but it looks like u have to finish building them, i'm looking for already built ones.

I'll probably get flamed for this question, but here goes. I'll be purchasing a new sub in July and am having some trouble making a decision. I had originally planned on using the current box I have (1.21 cubes sealed) and getting either a SA-12 or Level 3 12" (the cutout is only 11" and those two are about the only ones I've found that will fit). But I've been doing some thinking about it and have come up with another idea. Getting a cheaper sub like a 10" DCON or a SA-8, and getting a really nice ported box built for it (I'm thinking Argent Audio). I'd love to do a IA 187, but I don't know enought about what I'm doing to put 600 watts on a 300 watt sub. Either …

Me and my buddies were messing around welding and wiring two horn voice speakers together Sharing the mania!! Looks like something out of the haunt... little video http://s1313.photobucket.com/user/sgunnem/media/VID_20130429_192648_zpsff6226e9.mp4.html

Wooo, just got paid today time to get the ball rollin on the 12 D2.. :ph34r: :boink:

i cant decide between 2 sa-15's or a single z v.3 18. what would be the pros and cons of these 2 setups? which would be louder and which clearer? i mainly listen to dubstep, rap, and reggae.

as some of yall know i was hit by a drunk a driver about 2 weeks ago and ive been cooped up in the house for a while so ive been on here alot i seen purple hazes custom solo x 15 and that got me thinking i want to see more everyone upload there pictures of custom subwoofers

Ok guys,first of all hello to everyone,im new here and sorry in advance for my english since it is not my main language,and for my ignorance about Sub's,Boxes ,and similar I am getting myself a 15" MB Quart Reference series RWE 352 subwoofer : (Source:Google ) It's 700w rms,1400 max,15",and im getting it very cheap from a friend,its almost brand new ^^ Problem is,i asked couple of guys,and saw on net that its recomended for this Sub to go in Sealed box 50 liters~....I already have a 300w RMS 10" Radical Audio subwoofer in a 26l sealed box,and ...weeell im not satisfied,i mean,its clean,fast precise bass,but just aint louuuuuud :/ So im kinda concerned how will it b…

Does anyone know the voice coil dementons and if possible what I'd need to run a nsv3 coil and the differences thank you

http://www.reconingspeakers.com/ so i've been looking for a recone at a decent price for my RF power hx2 15 and came across this site. they r the best deal i can find. full recone kit for $75 which is 10 bucks cheaper then forevrbumpn from smd. they only show the 12" version of my sub on the site but i emailed them n they got it for mine too. anyone ever dealt with them or heard anything good or bad about them?

hey guys, i was wanting to install my jl speakers buttt i had a question i know u guys can help me out with. my stock speaker size is 6x8 in front and back. up front, i have the jl 6.5s and im doing tweeters up in the pillar up front. then in back is where my problem begins, the speakers are 6x9s and the hole is for a 6x8 so how much if any will i have to cut out to make them fit?

Nope.

I'm looking to upgrade my stock system, just something simple this time. I'm keeping the factory HU, which has pretty good output, and I have a JL 300/4 that will match (needed balanced differential inputs on the amp to match the factory HU). Now, I'm thinking about the speakers. I want to do components in the front, and ignore everything in the back for now. I'll run the setup active using all 4 channels from the 300/4. The car is an 06 Acura TSX, and I'll keep the components in the stock location, which means up to 6.5" woofers in the doors, and tweets on the dash (stock fires into windshield). At this point, all I need to figure out is the speakers. I want to ke…

Anybody know anything about a sundown/T3 hybrid 12", dual 1 ohm? I'm lookin into them but haven't heard anything about them. Supposedly 2500 rms? Would they go good with a saz2500d and a 4.75 cube box tuned to 36hz?

Purchased the New Minataur II, Currently have two IDQ 10's running off a Zapco Comp 300 (Will be replaced with the Minatuar), Sounds decent, Was possibly looking to pick up a single Alumapro Alchemy MX 12 and giving that a shot instead of the two 10's, I'm pretty much in to SQ and prefer tight base but def dont mind it getting a bit load every now and then. Was curriuos if anyone had any thoughts / Exp with both Subs. And just FYI, This will be going in a 2010 Camry, top end will be ran off a Kronos and it'll be pushing one of the following set of comps, Boston Acoustic Pro 6.4's / 6.5's, Diamond Audio Hex DA6.6's (loved these in my old truck) or a set of MBQ QSD 216's (j…

Please read this post. http://www.soundsolutionsaudio.com/forum/topic/62356-the-time-is-about-here/ TY GUYS!!!!

who of the two respone better to frequencies + low , Forgive but my english is bad Nowadays I have 1 btl 18 " and think to buy other one

Hey guy! I'm upgrading my electrical system, and I want to know what size pulley should I get for a 250amp alt going into a 2002 ford expedition xlt. What I will have running in the truck when I'm done are two saz 2000d powering 4 ascendant audio havocs 15 inch subs. Any help and infos are welcome. Thanks!