Subwoofers / Speakers

I have a 1997 grand am and it came stock with tweeters, the door speakers are 4x6's. Tried a search for it but came up with nothin. How do I go about upgrading them, do I upgrade the speaker and tweeter seperate or what, do they have a factory crossover. Thanks for any help.

Looking for an SQ sub that gets pretty loud and still clear. I have a Kicker zx1500.1, rated at 1687 RMS at 2 ohms, so that's around 840 RMS at 4. I don't care if it's a a 12 or 15 as long as it fits in my trunk. I like the IDMax but it's too expensive. I really don't want to spend more than 300. I also like the Fi Q 15" but I'm afraid 1687 is too much and 840 is not enough. Any suggestions?

What would be a good box for three re srx 10's in back of bench seat on a 2000 f250 or can build to

Anyone used this line? I have heard some good things about the Kappa line & want to know if anyone has used them themselves. I am probably going to get the later one.

I Saw This Link And Still Has Them For Sale. Would Get Them But I Dont Have The Money. So I Thought Id Pass It Along To Everyone Else http://houston.craigslist.org/ele/1307058899.html

Does anyone know if the SSA recones will work with say a psi 18" ... just curious...

alright, this isnt really about the subs in general, but I am not starting a build log right now so figured this is where it should go. I recently picked up a trio of ppi pcx102 dual 2 10" flat cones. I am going to wire them to a 1.33 ohm load, got a few ideas on amps but am wondering about how much power I could give to them. they are rated at 250 rms but was wondering if they could possibly handle a little more as long as its clean? I have more than this but am willing to devote about 5.5 cubes before port and sub to this build. I dont think 3 10s need that much air, but I have it if needed. subs will be forward firing for no other reason than the fact that I can then t…

anyone have a link to the ts specs and parameters for this driver? i cant seem to find a link to them or a email addy to get in contact with clarion. im not really interested in a phone number. any help would be very much appreciated as i want to model these drivers in winisd.

Yup..finally ordered my crescendo 5500... Just a few more weeks and i cant wait..... Very customer friendly guys.....

Was wondering if anyone knows which 6.5s would sound better. by better i mean the most Clarity at High & Loud volumes, without alot of distortion, the Alpine Type R's or the JL audio C2s

I just sold my 15" TC-3K DVC so I'm looking for a new sub. It was in a 2.5 ft^3 sealed enclosure so I still have that box to work with. I also have a dual 12" sealed box 1.0 ft^3 per sub as well for use. The sub will be powered by my Sundown 1500D. I'm looking at the Havoc 15" to run sealed but haven't heard the sub so I'm looking for some suggestions on sub models and 1 15" vs. 2 12" subs. Looking for LSQ since with 1500 watts on tap I like to turn it up a bit. If you're wondering I got rid of the TC-3K since I have another for home theater use anyway but just want more SQ. It was a great sub but guess my ears are changing so looking for a bit more SQ than I had.

I plan on buying the DCON to put in the trunk of my sons car. It will be powered by an Alpine MRP-M500. I have the recommended specs for the ported box. My question is does any one have a top firing and top port box plan for this sub? I plan on cutting holes in the rear deck to allow sound from the trunk to enter the cabin area. Any other Jetta folks out there with any ideas on the best way to get sound into the cabin with the rear seats closed?

Which one would have the most output for daily in a 3 12, common chamber slot port tuned to 32 hz? Im mainly looking for something that will get loud and low and still sound moderately decent. My amplifier is a saz-3000d so im looking for 3 12's in the 1000 + watts range. Anyone have experience with the two? Any help will be greatly appreciated.

My jeep has 6x9 in the front and 6.5 in the back. Thy are the infinity gold system that came with the jeep. I just purchased a pair of ID ctx65cs speakers and am stuck on what I should do. My options are as follows 1. Put ID component set in back and replace front 6x9 with ID ctx69. Buy a 4 channel amps to run all 4 2. Buy another set of ctx65cs and run them in front and back off a 4 channel amp 3. Put ctx65cs in front and run off a 2 channel amp(100rms x2). Run the stock rear speakers off of the head unit. What do you guys think? I am leaning towards option 3, it will allow me to save money towards my subwoofer. I know with option 3 that my music will be a good deal lo…

Hello all, I'm looking to upgrade on some equipment on my 04' Jeep Grand. I've been out of the scene for a few years and need some advice on equipment. Here is my set up so far: -Alpine head unit -Front stage: Dynaudio 7" seperates, powered by PPI pc275 @ 4ohm (100w) -Rear fill: Infinity Kappa 6.5" coaxils, powered by head unit -Subwoofer: 10" Audimobile EVO vented ~40 hertz, powered by PPI pc275 @ 4ohm mono (300w) -much sound dampening Goals: Keeping the Dyn's are a must as well as the head unit. I would like to use 2-10" subs or possibly a single 12 in a smaller vented enclosure-2-2.25 cubes (space is an issue). I listen to metal and would like opinions on tuning feq…

im pretty sure that i want to go with infinity kappa speakers to match my 463.7 front speakers that sound AWESOME. right now i have a plate made for 4 4's that i have 4 proaudio speakers in it, that sound alright, but 2 of them are blown. so im probably either going with 2 693.7i kappa 6x9s, or 4 42.7i kappa 4's. im kind of leaning towards the 4's sounding better, what do you all think?

Moved my Q to Mach 5 Audio Forum. Thx!

hey does anyone know where to find some grills for a set of 5.25" components i'm looking for some fancy grills not just the mesh but having a hard time finding some??

Purchased the New Minataur II, Currently have two IDQ 10's running off a Zapco Comp 300 (Will be replaced with the Minatuar), Sounds decent, Was possibly looking to pick up a single Alumapro Alchemy MX 12 and giving that a shot instead of the two 10's, I'm pretty much in to SQ and prefer tight base but def dont mind it getting a bit load every now and then. Was curriuos if anyone had any thoughts / Exp with both Subs. And just FYI, This will be going in a 2010 Camry, top end will be ran off a Kronos and it'll be pushing one of the following set of comps, Boston Acoustic Pro 6.4's / 6.5's, Diamond Audio Hex DA6.6's (loved these in my old truck) or a set of MBQ QSD 216's (j…

I just ordered a set of soundstream components and dash speakers I am wondering what experience some of yall may have had with them and if they are any good I found them for a good price and I am using them to replace my factory speakers you cant hear them at all over my 6x9s and woofers

hi i am wondering wich set of 6.5 components would be better or sound better the cdt EF-61CF or diamond audio hex. can you tell me how good the set was was if you owned any 2. both are about the same price range.thanks

hey guys, i've been trying to figure out what to do and i'm hoping you guys can help me out. i've been on the fence for the past few months trying to decide which pair of subwoofers i should get for my new set up and i've narrowed it down to two choices, but i can't decide which one to go with. my choices are either 2 Incriminator Audio Lethal Injection 12'' or 2 AudioQue SDC2.512. the crappy thing is i'm in Canada so its tough to find the subs to demo in person. now from what i've read online about reviews for each sub they both seem to be awesome. they both cost about the same. both do 600rms/1200peak though i've read that people have given them both more with no worr…

My friend has a TC-3k 15" Subwoofer for sale for $280 and might be able to get it down to $250, worth it?

I am in search of good mid-high range speakers for my car doors. I am looking for good sound for a reasonable price. I was wondering what you guys thought...

hey guys what subwoofer will be louder than the audioque hdc3 15 copper coil. remeber it has to be a 15in subwoofer