Subwoofers / Speakers

Just got the word, the Mach5 SPL-15 will be built.. I'm looking forward to this. triple stack 8.5 round mags, 6 spiders. This will be a monster. 3000rms per mach5 It will be a little while before I actually get it due to building and shiiping but I'll post pics when it comes...

the amp im set on is a rockford fosgate t15001bd on that power which would be louder 2 incriminator audio lethal injections 12s or 1 incriminator audio death penalty 15 if they were in the perfect boxes

I Saw This Link And Still Has Them For Sale. Would Get Them But I Dont Have The Money. So I Thought Id Pass It Along To Everyone Else http://houston.craigslist.org/ele/1307058899.html

Hey guys whats up. I'm selling the Exploder and getting an Accord coupe. I want to do an IB setup...I'm moving away from the SPL deal. I am starting to crave more SQ. Possible drivers I was thinking about were: 1. single ED 19Ov.2 (already have) 2. two Exodus Audio TempestX 3. four ED 13Kv.2 (on sale right now) Not really sure about what else. I really want to do two 15 inch subs...I'm thinking it should get pretty low and have decent SPL. Also need some advice about midbass...I was thinking about making some 8" kickpods lol.

So I am looking for a sub that could fit my needs. I need something around a 6" mounting depth as that would give me just over 1.5" of backspacing. I was planning for 4 sa 10's but my box wouldn't allow for it. My max dimensions for the box are 27-H x58-W x9.5-D1 x6.12.5-D2. Any help would be great.

I am looking at the DD 9500 series or the Death Penalty series by Incriminator Audio. If anyone knows of anything better for around the same price as these two then please post it here.

So I asked around on a few forums about my custom dual 2. Since I am adding a second coil, going from a single 2 layer to a dual 4 layer, I am adding mass and adding double the wire for current. I now have double the windings in the gap. So I asked if my Fs would drop a tad from added mass, efficiency would go up a touch from having double the windings, and if power handling would go up a tad as well as now I have 2 wires sharing the power, thus 1/2 the power going through each wire. I was basically told NO. Now I put some paint on a cone, and all you experts are like "DUDE you changed your thiele small parameters!" Are you guys freakin kidding me? And you all spend so …

So on the combo for the 15'' nightshade with the 1500d, it sais "Item not available", but on the sub and amp individually its in stock or 'allow 1-2 week build time'. so are the nightshades available for order? or just not the combo? whats the deal because im looking to buy in the next couple days. Thanks

Just got my icon in and haven't put it in the box yet getting that done monday but overall impression is..... holy shit!! This is the beefiest sub i have ever owned looking forward to getting it installed!

I'm going to attempt my first door pods. There not going to be down low and the bottom of the door like most. Mine will be up a little higher. My question is, whats the best way to face them??? Should they (6.5" mid & 1" tweet RE's RE comp set) both (pass & driver) be angle up towards me? Or the one on the pass. side angled towards me, and driver towards the pass.? :confused: Or what other suggestions would you recommend?

Hey Everyone, I am switching from my 15 BL to either 12's or 10's. I love the 15's but I sold one to a friend and am trying to sell another one that I never even used NIB. Anyway, I was thinking of doing 2 or 3 12's or maybe even 4 10's. I just have not really made up my mind yet. I have not had either and I was wondering which you guys prefer. If you were going to make a system and had either choice what would you choose and why. Also what brand would you go with, I'm looking for good loud subs that stay tight and keep there quality. For now they will be on a SAE-1200 but I plan on moving to a 2000 in the future when I upgrade my electrical further. Basically just …

What are the three most commonly used slug types in sub woofer motors and what are their advantages? (I'm looking for three EXACT or VERY CLOSE answers)

i have yet to decide on a new front stage, i have a pretty beefy set up /w eu's in the rear and a w6v2. was wondering what comps would do well with 70 watts goin to em. i was lookin at focal polyglass 165v2's and rainbow slc 265's. the focals have high sensitivity, so i know they'll be loud enough to be heard /w my rear stage. any reccomendations are welcome, the doors will be deadened, so midbass response will be better. also, where's a good place to stick the tweets? cant build kick panels cuz i have a foot e-brake, and i use it. thanks a lot for the help

Hello, I am buying a 15" Xcon for a friend of mine(he gives me the cash, it's really not a gift !!!). He builds enclosure for some shops around here. He has a 15" Kicker S15L7 in a 6 ft3 sealed enclosure with about 1300watts rms of power. It's the best sounding L7 I've ever heared : huge amount of bass, great low end notes,... How can he achieve that with the Xcon ? Would it be better with a sealed or a ported enclosure? Few people seems to use the Xcon in sealed boxes, how is the output in sealed boxes ? He has a little trunk, the 6ft3 enclosure takes all of it! We made some mesurements, and here is what he can afford now : 35cm*49cm*80cm or in inches : 14" * 19.6" * 32…

My buddy wants me to put a system in his boat, and I'm looking for a sub any suggestions?

i have a 91 honda prelude si and im looking to get better sound in my ride. right now i have a eclipse cd5030 headunit and im going to be getting a 2 set of crescendo audio tweeters. i was wondering what would be a good mid woofer or coaxial speaker to use with the tweeters. i listen to all kinds of music but most of the time its rap.

My idea, 25Hz tapped horn using Kicker CVXs, was stolen by Kicker, by Deon screen name dB-Kicker. I didn't do any of this design work or build, it was just an idea, but an idea shared between 2 men in private messages. Since my private message turned into a very public build, I took it upon myself to do the same...share private message information. I made a comment/reply in his thread about it, he ignored it and sent me 3 PMs confirming guilt. I gave him a day to reply, then started my own thread. It was ignored, then deleted, so here you go! KW Jordan Powell Private Message 08-17-11, 10:46 PM dB-Kicker Member Join Date: Oct 2008 Location: Stillwater Posts: 75 Re…

I have two IA death row series 18's n the back of a 97 jeep grand cherokee...what would b the best wiring on them for daily beats...they will b ran off a Clif Designs 5000watt amp with a Kinetic 2400

Simple question, i'm thinking about installing my component set today (finally) and i'm about to check to see if i can make a baffle board or if i need to do rings. either way, i know i have to make the MDF waterproof and i planned on using resin. Now, when making my box, i was told not to put the speaker in the box for 24 hours because the fumes from silicon sealants are known to eat away speakers. Is this true with resin? I ask because i would really like to get them running today, but i also don't want to ruin $250 worth of speakers. Looking for a quick response!! Either way i'm letting the Resin cure, but as soon as it does, will it be safe for speakers?? Thanks to a…

tell me everything you know about the 2nd gen mag. i just bought one 12" sheerly on all the good things i hear about mags. anyone have one? compare it to other subs, specs, anything/everything. im new to this forum but im decently knowledgeable about car audio. dont be afraid to get technical.

Im going to upgrade my amps with a Soundstream Reference 500sx for the sub and a Zapco Ag 360 for the components. Considering to upgrade to a single 10 or 12 for now in a sealed enclosure(i can make myself), looking for sound quality, something that makes your chest rumble at the same time. $300 shipped is my budget Rli-10, Rlp-12, 10w3v3, 12w3v3, IDQ 10 & 12, Re sex 10 &12, Fiq 10 & 12, Icon 10 & 12 these some subs had in mind. And do you think a sealed enclosure would match the type of car i have, any suggestions and opinions will help very much. Thanks alot!!!!

I'm thinking about replacing my two-way components with a DIY three-way front stage. I'd purchased a set of Seas CA18RLY 6.5" woofers and 27TAFNC/G tweeters last year, but the mids are too deep for the stock door locations. I ended up going with JBL P650c components which sound good, but I've always wanted to try something better. The plan would be to put 4.5" mids in the door panel, and put the 6.5" woofers and tweeters in the kick panel. I have a SAX-100.4 and SAX-100.2, so I should be fine with amplification. Any suggestions on 4.5-5" mids that will complement the other pieces but still comes in a shallow depth (<= 70mm)?

i need help again designing a box for my 12" ap/spl. ive got sugguested 2.5 @ 35hz. atomic sugguest: 3.5ft3 4(4

A while back I ordered a custom recone kit going from a single 2 to a dual 2 coil, and I was wondering if there would be any noteable increase in power handling, Mms, and efficiency as well as a lowering in Fs since there will be double the coil... but I think i was mostly told not enough to be note worthy. Later on I painted the cone, and suddenly I was being told I would totally mess up the drivers SQ and SPL by adding mass and making the cone stiffer (obviousely mostly by noobs and tards) Anyway, Exodus Audio's GEN II Maelstrom-X came out. Basically the only change was going from a single 4 to a dual 2 coil. The added coil length was enough that they changed the power …

hey guys..i been looking at a jl 13w3v3 model and a idq 12v3 model as well.. i was wondering of these two what your opinions are on going sealed with about 500 watts going to them?