Subwoofers / Speakers

alright im looking to get 2 18''s im working with a crossfire xp2400, and up to 18cf i want it to be good quality and loud n low 28-30hz...im thinking the best subs would be 2 XCONs. anyone have any suggestions??? or are these the right ones:) ty for the help!!!

Damn https://www.dss.audio/products/savage-15?utm_campaign=Kit_2017-Jun-10_20%3A26%3A37&utm_source=facebook&utm_medium=singleproduct_post&utm_content=10548225735 Curious about what you more experienced people think about this? Looking to buy new subs and this is up there on the list.

I got 2 Funkin Audio MF12G2 12"s and one is working fine reads 3.6 Ohms the other is reading nothing. It has a very wired way they get wired I can post a diagram here if needed. But the bottom line is I wired them both up the same one worked one is not. Any idea on who could fix one of these as they are no longer around. Could I just use it's motor and basket and recone it with FI BTL soft parts or someone elses and switch it to dual 2 ohms? If anyone can do this please let me know what would need to be done..

I'm not planning on getting any (way too much for my needs) but has anyone dealt with splc subwoofers? They seem pretty legit. Just wondering if anyone has first hand experience with them. I see a craigslist posting for two splc neo 10" subs almost every other day(along with a stetson 7k and some battery's) for $2000. Either way, who has dealt with these bad boys and has videos?

how much is a rockford fosgate 12'' Hx2 motor and basket worth? i found one for sell and they want $75. i found a recone kit for it. is it worth $75 though?

im looking to upgrade from my previous setup which consisted of 2 AQ sdc2.5 15's and an AQ1200D, basically i want to get louder, but i have the same limited space i had before. the dimensions i have to work with are 47" wide, 15" deep, and 35" high. i will be using an AQ2200D to power this system. i mainly listen to decaf music or other rap/hiphop 90% of the time, other 10% is rock/metal. so a sub that likes to be tuned low is what im going after. my budget is 500-600 bucks tops. im just having a hard time making a decision because i want to make sure this setup will get louder... i dunno if i want 2 15's that can take more power, or a single 18, or a IA DP 21, or 4 12's.…

Who has this gcon now? I think Pork chop had it?

tell me everything you know about the 2nd gen mag. i just bought one 12" sheerly on all the good things i hear about mags. anyone have one? compare it to other subs, specs, anything/everything. im new to this forum but im decently knowledgeable about car audio. dont be afraid to get technical.

I found a decent deal on some dd 1508's locally but they're s4 voice coils and I noticed on dd's website they are now only offered as d2 or d4 so I was wondering if there's any difference in between the two other than the voice coil configurations.

Was told it's a 12" fi q , theres no Markings or ids. I just wanna make sure it's a q so I can build the right box and send the right power with a jl 1000/1 https://i.imgur.com/5XhcaRe.jpg https://i.imgur.com/8gjemrn.jpg https://i.imgur.com/L0Q6fDQ.jpg https://i.imgur.com/KGI9M2a.jpg https://i.imgur.com/bCRC6Mf.jpg

I was wondering for those of you who own this particular sub, what kind of enclosure do you have it installed in? I'm considering porting it. DLS recommends sort of a high tuning. I'm thinking tuning it to the low 30s. I don't want to have any peaks in the response, so I want it to tune a bit lower than what DLS recommends (or should I just stick with their suggestion?)

Its very rarely I truly want a specific subwoofer. The spl-15 has done it.. I really like the 12, but wanted bigger. I like the idea of supporting a company that will support you and be willing to help advice like mach-5 does. And at the prices Marks doing the spl-15 for its crazy not to pick one up. It looks to be in the same league with $600-1000 subs. So guys I really want Mark to go ahead with the build.... SO what I'm really trying to say is buy a damn woofer Thanks, Joe

Does anyone know if the SSA recones will work with say a psi 18" ... just curious...

I have 2 zcon 18s and trying to get some ideas on what kinda airspace people are going with on them. Wanting to tune around 31 to 34.

can i put to one 15 MAW dual 4? I know it says 500 watts rms, but i wanted to know if it can handle more power than that and if so how much? Thanks

Hi, I would like to ask if anybody here knows any good or bad review regarding this product. Thanks

Speakers: A speaker converts electrical energy to mechanical/acoustical energy. It uses a coil of wire, which acts as an electromagnet, set inside of a magnetic gap of a permanent magnet.It is pretty simple if you think about it Voice coil motivation: When a current is passed through the coil of wire, called the voice coil, it generates a magnetic field. This electromagnet interacts with the field in the magnetic gap and the voice coil moves. The direction of movement depends on the direction of current flow through the VC. Since audio is an AC waveform, current flows in one direction and then changes polarity, the VC moves either forward or backward from its point of…

I have a 1994 Toyota 4runner and I want to upgrade my speakers, mainly for highs, but for mids also. I'm eventually going to get some 8's or something for mids and upgrade in that area. I have a Fi Bl 15 and a Sun Audio SAZ 1000d on order. My car has 4" standard speaker mounts in the dash, but none in the doors. I have a Pioneer DEH-P5000 head unit installed and some crappy 4" speakers that are almost blown. I could probably fab some mounts for some larger speakers, but if possible I want to stay with some 4" in the dash. Any input on some quality speakers that I could get for under $100 a pair would be great.

Currently have 2 x 12" KFC-xw1225db in a 80 lt box tuned to 25 hz in a Custom VY commodore. I wanted to take away the box and turn in into an IB setup? Spec's for Sub are as follow... Z. 4+4 ohms Re. 3.1+3.1 Levc. 4.7 Sd. 0.0312 BL. 17.9 Vas. 113lt Mms. 126 ?? (12.6) Fs. 24 Hz Qms. 6.06 Qes. 0.37 Qts. 0.35 Xmas 9mm Peak Power. 1200 w RMS Power 300 w Sensitivity 93 db Displacement 0.15 cu-ft Currently have a mono block amp running the Sub's. Kenwood Excelon KAC-X811D ( Im sure its set to 1 ohm ) The current setup was done by Autobarn and its no good!, will the IB setup work well or any idea's on a new box?. I spend a huge amount of money for this setup 3 yrs ago and n…

I just ordered a set of soundstream components and dash speakers I am wondering what experience some of yall may have had with them and if they are any good I found them for a good price and I am using them to replace my factory speakers you cant hear them at all over my 6x9s and woofers

How do these compare SQ and SPL wise?? I'm waiting to hear from a guy about a used RL-i 12" but also there's a local Treo dealer who said he'd sell me a TSX 12"D2 for $150 new w/3 yr warranty. It seems the 2 are fairly close in rms power, the SS being from 300-500 rms (I think) and the Treo being around 400rms (claimed it's underrated)... I imagine that both have more than adequate sound quality, but what about output? Any experience w/the Treo line? The dealer mentioned how the Treo is a 'unique design that makes it louder than it should be', take that for what you will. I'm limited on power (~300-400w rms) so I just want to make the most of what I buy and have some…

I have 2 kmg-15D's. They are dual 4 ohm, 15" subs. I don't have any specs for these subs. If anyone has any T/S numbers for these subs, I would greatly appreciate the info!!! I need enclosure info for these speakers mainly. These subs were built somewhere between late 1998 and 2000. I need sealed and vented enclosure measurements for enclosure size, for sealed, and enclosure size, and port area/tuning for vented. Please!!! If anyone knows anything, let me know!! I really need to know!! Thursday, I plan to have enclosures built for these subs. Please help!! Thank you very much. Joseph

just as the title states... seen a few threads about the mach 5 and was just wondering how it compares to the icon

trying to figure out my box vol. and whatnot now that I screwed up a little bit putting it together and the dimensions are slightly off from the plans. what is the displacment of a 15 D2?

How much do you guys think a 2.8 ohm dvc, Onyx 12" sub in perfect condition is worth?