Subwoofers / Speakers

i cant decide between 2 sa-15's or a single z v.3 18. what would be the pros and cons of these 2 setups? which would be louder and which clearer? i mainly listen to dubstep, rap, and reggae.

I really wanted to get a Fi BTL 18" subwoofer for use in a car and possibly other various occasions. But I took a trip over to Guitar Center and tested out the JBL MRX518S. I was amazed with its volume and clarity. I have never heard the BTL so im curious if it can get louder/sound better than the JBLs even if it is not in a car. If anyone knows anything that would be a great help. Thanks. Also I understand that they are not really similar speakers, and I plan on using it more when it is not in a vehicle.

i was wondering if a sub calls for a 120 sq in port and you have 3 of them do u multiply it by 3 or what?

alright im looking to get 2 18''s im working with a crossfire xp2400, and up to 18cf i want it to be good quality and loud n low 28-30hz...im thinking the best subs would be 2 XCONs. anyone have any suggestions??? or are these the right ones:) ty for the help!!!

so im hoping this is the dumbest question i ever ask on here, but if i was to get a set of component speakers would i need to use a new amp or what ive always been confused by components please help

i was thinking about getting a 18inch btl, i do not plan on entering competitions i just simply would like to have a system that hits hard (really hard), sounds good, and lasts a long time. i have a 4000 watt hifonic brutus amp, if this is the right sub for me what options should i choose, or is there a better sub, if so which one?

My buddy just sold me his SSD 12's already in a ported box at about 6 cu. He poked two holes in the surround of one speaker, I knew of this prior to buying them from him. I'm wondering what my options are. I do not want to re-cone it myself, I would like to send it in. However, he has had these subs for quite sometime, I'm almost positive the warranty has already expired. ANY SUGGESTIONS???

Just as topic asks.... how to you tell what the dual voice coil ohm is?

Do you have a date when they will be available?

Hey guys i have done some googling and looking around but i cant find a good enough answer to my question... Its it ok to invert subs when mounting them? The general feeling is due to the low frequencies it is ok but at what crossover level does the sub being inverted affect performance? I was thinking of mounting my IXL 10 inverted to protect the cone from occasional lose crap in the boot plus the motors look really sexy :clap: However i cant help thinking that the motor structure must effect the sound quality as the air wave is being impeded by the Basket Anyway if you guys could give input that would be great I was thinking something like this with 2 IXL 10's *This i…

im gonna make a box for the girlfriends 02 bug for the RE SRX 10 and which would be the best. sub back port up, sub back port side, or sub back port back? or does it not matter really. not goin for a major setup, just a little smooth bump. thinking 1.5 cubes 35hz

I bought 3 10" Fi subs but never could find what model mines were and im just curious to know. All i know is that they are Fi subwoofers.

Hey guys i need help with building this box so i get the right air space . The dimmensions i have for space is 25 long 13.5 tall and 16 wide. I am going to put a ssa gcon 15d4 sub in there. I want it to look like http://s1150.photobucket.com/albums/o603/Fordman321/?action=view&current=subbox.jpg. Its just a crappy paint scetch but you get the picture haha. Any help would be awesome Thanks JD

How much do you guys think a 2.8 ohm dvc, Onyx 12" sub in perfect condition is worth?

How are these subs? Are they loud? Do the sound clean? How do you think they compare to the SSA dcons? I'm getting either a pair of the Level 2 15s for sealed operation, a pair of Level 2 12s for ported or a pair of the dcon 12s for ported operation. I'm looking to purchase one of these pair of subs today! Do the Level 2s get loud sealed? I just want a loud and clean setup. Either pair will be powered by 700 watts.

Should I run two of the sundown zv3's or 4 sa's The amp I'm running is the 5500 crescendo

Anyone ever used banana plugs in a system? I am installing a 10" icon and a 1000D and i was going to use banana plugs to plug the wire into the subs. These are the ones i am going to buy. http://www.knukonceptz.com/productDetail.cfm?prodID=eKs-BP Will these fit in an icon voice coil terminal? Should i just run the wire into it?

I have 3 Soundstream Exact10's (Love them btw) Each one has its own issue. Now Soundstrem doesnt carry a recone for this sub. I'm new to the whole reconing thing. So I dont know where to source parts and materials needed Is there anywhere that I'd be able to get one or one that will work? Any help/suggestions greatly apprecited

In my introduction thread, i had a few set ups for my dodge intrepid that I had in the past and the present one that I do have. My new project is my suburban ls What I am looking for out of my subs is just something that is really hitting hard and worth my money. my thoughts have been -four 15 in subs -two 18 in subs (fi btl's) the amp i plan on running on any set up will be the 2500d orion i am really interested in the Pioneer Premier TS-W8102SPL. has anyone ever that sub as a set up or know any good information about it? i just need some ideas and some knowledge on what will work best for me.

With me, with most things I learn by taking them apart and reassembling them. Thats how I got into computers. I took a few old ones apart and reassembled them. I'd kind of like to do the same thing with a sub. Of course I'm not going to tear apart my brand new SPL-12s.(still havent arrived though) I've watched the Discovery Channel video about how a subwoofer goes to together, but thats not enough for me. I see that Mach 5 sells baskets and stuff. http://cgi.ebay.com/MEMPHIS-AUDIO-MOJO-18-...1QQcmdZViewItem That is rather neat, even if it is pointless. I'd like to do something simmilar. I'd like to do a 18" subwoofer. I'd like to do it rather on a budget, so if I screw it…

Hello everyone, i have two sets of 6.5 in. speakers im using as midbass in my s-10 pickup, im putting one speaker in the factory location and putting the other in Q-forms, has any body done this before, and how does this sound, then i am using some infinity 4x6 plate speakers in the factory location on top of the dash, the 6.5 will be crossed over at 60hrtz, then the infinity plates around 400 hrtz, has anyone heard a setup like this?I will have (4) q15s subwoofers in the box of the truck with a blow through to the cab, well i was just wondering what u all think about this setup, ty, brian

i have 2 rockford he2 10s i have a banpass box and a rockford ported box whih should i use and i have a jl 500/1 will that amp power these subs and if so how should i wire the subs to get max performance

my max dimensions are 18h 37w 36d

Anybody know of any shops in Fort Wayne, or surrounding cities that does subwoofer repairs? I can't seem to find one.

Picture !