Subwoofers / Speakers

Has anyone tried the new line of Precision power PC.15. Was wondering if they would be very reliable and if thet could handle their rated power for extended periods of time. http://www.sonicelectronix.com/item_23663_Precision+Power+PPI+PC.15.html?utm_source=froogle&utm_medium=organic&utm_campaign=froogle

well, i really really want two mj 18's in my trunk but the current box didnt fit! please help me out with a box design. the current dimensions for the box are 38 1/2 inch's wide, 24 3/4 deep, 24 1/4 tall. i just measured again and this is what i came up with...42 inch's wide max, 22 inch's tall max, and 21 inch's deep. please can anyone help me out. this is for my birthday presents which im going to be getting in two weeks. ssa i will be contacting you for two mj 18's really soon! btw i want the box to be ported...i dont care if its slot or aero. leaning more towards an spl box. thanks in advance

Ok, guys I have a ported enclosure with a 13W7, It hasn't been braced... How much more spl do you think I could gain if I braced it? I'm using 3/4" MDF and I'm driving it with a JBL GTO 14001.

I have narrowed my search to a 12 sub to the either a single FI SSD or a Sundown SA 12. I plan on using a ZX 1000 at a 2ohm load in the back of a suburban. if you were in my shoes and needed a 12 sub to run in a sealed inclosure and had about 300.00 to spend on a sub which would you chose and why. Feel free to suggest other brands. thanks

Hello everyone, I have heard Rockford fosgate p3 12s in a ported box and sundown SA 12s in a ported box, I heard them at different times and both seem to be about the same as far as loudness goes, they are both 600 rms. I just wanted to know if anyone has had experience with either and what sub is a "better sub" in your opinion.

http://pierceaudioproducts.com/forum/index...pic=331.new#new Slayer:

So right now i have 2 15" Fi Q's but im starting to get annoyed with them, They are in a 9 cubic feet box tuned to 33 hz (thats probally 7.5 cubes after port and displacement) Anyway they hit the low notes very hard but the high's suck, I heard the can somehow be reconed into a bl or changed into a bl is this true?

Hi, I currently have 1 kenwood KFC W3012 with an alpine m500 amp running at 4 Ohms with 300 watts in a custom ported enclosure (my dad and I built it and it's not that good). I bought it about 6 months ago and am not happy with my purchase. It gets moderately loud in the mid-range bass, but when the songs get lower, it gets super quiet and just sounds bad. It gets the job done, but thats about it, so it's time for an upgrade. I have a crown victoria with the police package so it has a HO alt already, and it has plenty of trunk space for a large enclosure. My goal is to have the loudest system around 5-700 (not including enclosure). I listen to rap/ hip hop I've been doing…

alright well i will be getting two 15" Fi Bl's. right now i own at jl e6450 6 channel amp http://www.carsound.com/articles/publish/article_268.shtml what would be some good component speakers to hook up with that amp and also go well with the Fi's? i was suggested these on another forum http://cgi.ebay.com/CADENCE-5-25-300w-3-WA...1QQcmdZViewItem

I've briefly heard a pair of JL 10W6 in a ported enclosure, i liked there sound from what i heard, but i would like more output. My budget is ~$400 Sub will be going in my ext cab Silverado, and I'm willing to take/leave my back seat out. I listen to basically everything, from rap to country. About 70% rap/hip-hop and 30% everything else. My goals are to have a nice sounding setup, with a good amount of output. I'm not looking for amazing SQ, but I don't want a one note wonder either. I've been thinking about a DC LVL4, LVL4XL, SSA XCON, Fi BL; I've even thought about going with two lower power subs. I am leaning towards a single 15" sub or maybe even an 18". Whatever I c…

im thinking about getting some ppi subs i have read that they have pretty good SQ for there price and i was just wondering if anyone knows if this is true? ive tried looking on youtube and other places but not alot of people have them or atleast they dont put them on the internet but if anyone knows anything about these subs please hit me up i would like to know more about them.. thanks

im looking for a new componet set 5.25 or 6.25 for front stage 95 Caddi. I have used a lot of diffrent main sream brands.Im running Dimond at this time. i jus wont try a new brand, whats good out there? The amp im useing is a RF P400-4 @50w x4. SQ is what im looking for in sound. any ideas?

ok, I am going to be getting some equipment for christmas, as well as some money I bet to spend on it myself. I figured I should start my research to see what I should ask for. Im looking at getting a sundown sae1200D, audioque AQ1200D or maybe saving some money and getting an autotek or hifonics 15/1600 watt amp. looking at others, but whatever I get, I should at least end up with at least 1200 true watts. my main question is how many subs to look at before I really do my research to pick one. I dont want to spend any more than about 300 bucks on the sub/subs. Im looking at 3 10's or 12's sealed, 2 12's or 15's ported, or one badass 12 or 15 ported. so like 3 - IA 187 10…

I have a single cab 2008 Chevy Silverado with 2 Memphis 12's but have them in a tiny box. I've been looking for 10's that would suit my needs and have been thinking about 1 Fi SSD 10" but now might go ahead for 2 Mach5 Audio IXL 10's. Are these subs good?(Quality & Loudness). How big should each sub get tuned to 34 Hz? Thanks in advance!

So, a friend of mine just got two JL 12W7's...sexy lookin subs. Before he kills my system I am curious, how do these subs stand up. Are they very good subs....SPL, SQ, etc. Tryin to find out before he puts me to far to shame, lol.

Hey guys, i've been thinking about upgrading to a different sub, but i cant decide what i want. Right now i have a SSD 12, which i am very happy with sq wise, and it does get decently loud, but not as loud as i would like. Im looking to stay with the 1 12 set up, or possibly 1 15, so what would you guys say would be a good choice to get as loud as possible. I've been thinking maybe a BL or something similar. I would like to keep the price around 400 or under. Thanks.

SO, after too much measurements, calculations...ect. I could do a vented enclosure, 1.5" thick mdf all the way around, port it...and after sub disp., still net 5 cubes per sub. My question now is, what would be best in this "small box 4 sub" type of enclosure... RL-P, Fi Q, BL,.... would like to get loud but sound good, and these subs fit in that requirement 4 sure... "also need to see 1 ohm at amp(orion 2500D)" side note. or, maybe 2 DP's? more spl oriented of course. I was searching threw the SS forum, and someone said 5 cubes would be choking them...? is this true?, should I go Fi Q/BL w/options...? or should I stick with a couple 15"s...? as 2-15" properly boxe…

Im wanting to get a two 15" setup. Either Fi Q or Fi BL. Its gonna be an everyday setup. I just dont know which to get. Either one, I will get will be fully loaded and then the amp to go with it. It's going in a 2003 Chevy Trailblazer LT. And I know I'll have to upgrade all my electrical, but I don't know hardly anything about car audio so any help will be useful

OK. Im building a box for my S-10 blazer and i need help with the port. The box is 38" wide 19" high and 14.5" Deep. It hold 4 RE SR 10 D4's. Id like the port to be now wider than 10" no taller than 6". id like it to be alot wider than taller just to kinda "fit" better... Thanks in advance -Mike

Hey guys, just bought a double decker pontoon boat and want to throw some Loudspeakers up top for some island parties and raft ups I hit during the summer. I'm shooting for extremely loud and bass heavy (seems to be what most people like) and have a budget of $1k for the setup. I was planning on getting two JBL Eon 15's based off my DJ friend's recommendation but I figured I'd ask here as well. I plan to power the setup with a Honda EU2000i genny (not yet purchased) or perhaps the Ryobi 2000. Also, I'm hoping there exists some way of connecting a blue tooth module directly to the speakers, than controlling wirelessly via phone. Is that possible? Thanks in advan…

ok so im looking at getting a bigger 4channel for my my cdt comps and my 6x9's and my question was how much do you guys think i should put on the cdt's??? I have the cdt ef-61fg's by the way so if anyone could help me out on this it would be great cause i only have a small older alpine 40x4 on everything right now and i know my cdt comps can get alot louder and more clean.O and another thing is that i wanna have ALL speakers amped in my car cause i dont wanna bridge the amp or run a 2channel to the fronts and run the 6x9's on HU power so thats why im lookin for the bigger 4channel. OK NOW I HAVE AN OPTION #2 ok so instead of going with bigger 4channel do you guys think i …

I just went to kickers site to look up info on my cousins comps and their entire site has been redone and they have a new sub in their lineup, the solo classic. They claim it to be very musical in small sealed enclosures, and now im really curious if maybe kicker has finally made something halfway worthwhile... anyone know anything about them?

Designing my box for my ZCON 18 this is what I came up with, does this look right to you guys?

i am trying to fit 8 gauge in the push button terminals on my subs ... how do you recommend i fit it in there? .... you need to put 2 strands on some terminals and i cant stuff them in there tight enough... should i solder them together and then push them in or is there something i am missing

How about a little history lesson on Blues? How did they start? Who was involved? What happened to the line when SoundQuest (Way before AAMP/Stinger) bought them out? When they decided to bring the Blues lineup back? I am very interested as I always liked the brand when I was a kid back in the 90's. P.S. Let's get Ray on here to spill the beans on Blues and Linear Power.