Subwoofers / Speakers

Not having heard any of the Fi subs I am trying to make a decision based on Thiele-Small prams and am having a difficult time deciding on the correct driver for my application. My front end consists of an A/D/S/ Pq 20 ran 2 channels to Dynaudio 240 MkII component set. 2-10

For box purposes, I am looking to get an idea of the weight of the 15 inch HDC3 and the 2009BL. I know my old BL was around 34 pounds but I know the new ones are heavier. Any info would help. Thanks

would the AQ 1200D be a good combo with two 12" D2 L7's?

right now i have a AQ hd3 12 that i am running with 1800 watts at 2ohm. the box it is in is 2.5 tuned at 32hz. i am wondering if a sundown nightshade ran at 1ohm with 2400watss goin to it in the same box would be louder? this is a DD not no fart machine.

I was originally going to get the Sundown SA series but I saw the AQ's and was wondering if they sound good and get loud? Plz be detailed because I haven't heard ether in a setup. I know the sa's meter well for there price point, but I want 2 18's or 3 15's if sundown gets some d4's. They will be powered by a aq2200d.

in your (non biased) opinion, which sub would you say, in there optimal enslure w/at least rms power running to them, would sound better/be louder? a few guys on CA.com i was talking to said that i should get the HDC's over the BL's and that they are louder. he said the HDC's are more comparable to the BTL's....of course i have my doubts but i want to know what you guys think thanks

hey guys, i came across a AQ hdc3 15 in a sealed box on my local CL for $100. i was wanting a sub for my old mustang so it this worth $100? there $275 new from AQ.....

for SPL and the sub that hits the low notes the best in a ported box seeing 1000 rms.

Have a question about which voice coils to go with, dual 1ohm or dual 2 ohm? The dual 2ohm will give me a 1ohm load which is 1200wRMS from the 1200d while dual 1 ohm will give me a 2ohm load which is 870wrms. The sub is "rated" at 1000wrms but I have watched a bunch of videos and alot of people have written about giving them alot more power. So my question: Do I play it safe and go with the 870wrms or can this sub handle the 1200wrms without being damaged? Thank you.

Does anybody have any experience with this driver? Does it sound decent? They are inexpensive and are supposed to be fairly nice drivers i was looking at pickin up two 10" and tossin each 1100w How would they stack up to two fi BL 10"?

well my subwoofer fund for a 15 went up to the 300-350 range cuz i dont wana be dissapointed, and i was wanting to know which would sound better and still have mad bass between the aq hdc3 and the fi bl ran off a hifonics 1600d? in a box at 4cubes and hopefully 32hz if not 30hz. and input will be greatly appreciated thnx in advance ~Bill

just making a final pick on subs for the back of a hatchback subs will be in a 2.5 3 cubic box ported and it will be a single 10 have about 800rms to play with at 4 ohms i mostly listen to rap.

Has anyone heard them? If so how do they sound and what size enclosure were they in. How much power was running to them? I am wanting to see if I can run a pair in a 12 net cube box with an AQ 2200 on each. Also if anyone has any vids please post them I really want to see what they can do.

My buddy has 2 10" subs (cheapo off brands) and 2 12" subs (Dual Audio) and the tens are being pushed by a 300 watt amplifier and the 12's are being pushed by a 580 watt amplifier. I told him that i could buy one sub and be louder than him but he doesnt believe me. So I am asking you guys whether or not a Fi Q 12"or an AudioQue HDC312 (both powered by an AQ1200D) will be louder than his setup. I am almost positive just based on the fact that he has chit subs but i am also wondering if he just has to much of a cone area advantage. Do you guys think i'll be louder?

I am considering selling my Icon 15 and getting an audioque hdc3 15. Before I make a decision I would like to know if anyone knows the suggested airspace and tuning on the AQ's. My current box is 3.5 cu ft. tuned to 30 hz. Will that work for the aq also? Also I would like to hear some opinions on trading the subs out because I have gotten very curious about aq after I got m aq 1200.1 and saw the quality of their products. My main goal is to be loud daily.

Has any one heard this thing before? I am sellin my hdc3's to get higher power handling subs. This monster caught my eye. I'll use it for daily on 2000 watts each with a comp every month or 2. Let me know what you guyz think?

Getting one of these as a temporary sub to try out. Trying to figure out how they are, what to do for an enclosure, and how much power i can safely give it. i have probably about 1200 on tap, the last owner said he was running it @ 2 ohms on an SAE1000 and it'll take more. I was thinking of doing something like 2.3 cubes net w/ like 60 square inches of port, tuned to about 35

anybody know the specs for sealed/ported box for an AQ SD2.515? (15") i cant seem to find it on their website... thanks

I have a 1997 tahoe and i'm looking to set my system up by summer. my question is should i do 2 audioque sdc 2.5 15's or 1 fi q 18'' sub? and amp choices will either be a audioque 1200d or a sundown 1200d. i mostly listen to hip hop if this helps and want mostly lows with some flex over ""SQL"".

Hey all im a noob to this so if im doing something wrong let me know... im selling my old system (2 eclipse 7200 12's and a rf p600.2 i kno i kno im underpowering the subs) in search of a better system... Ive decided that what ever brand of woofer i go with i want to do 3 10's... also i want these subs to fit in between the wheel wells of my grand prix... i believe the distance between them is about 37 inches... Im looking for SQ out of my subs... i am also budgeting my self cuz i know i can go crazy with my sound system... my budget is about $700-$800 between the subs and amp(s) Ive been looking at these brands... AQ SDC 2.5's, DC Lvl 3's, SSA Dcon's, and AA Arsenal's...…

Which sub has the capability of being louder for a daily scenario, no comps? Each sub will be run by a AQ2200d and two Yellowtop 1200d's.

My uncle ordered a four channel for his bike and gave me an arc audio mini amp ( http://www.arcaudio.com/p/ks-125-2-bx-mini# ). Does 70 RMS @ 4 ohms x 2 and 125w @ 2 ohms x 2. So now I'm looking for a good set of 5.25 component speakers. I have a 2001 Buick lesabre and that's wat size comes stock in the front doors. For substage I'm going to be running a 18" SSA Icon sealed off on approx 1000 watts. I want crisp highs and warm mid bass that will blend well with my sub stage. Looking for good suggestions on a set in the 100-150 dollar range. My uncle has all Polk components in his truck and bike and think they ssound good. Any opinions on them?

Seems like I read a lot of posts regarding people blowing or ruining their Fi sub for various reasons, causing them to get a re-cone... My question is, are these subs easy to destroy? They seem very durable and underrated, which makes me think the opposite, but after reading on here it seems not to be the case.. I want to get a better idea as to why there are so many cases of Fi subs needing re-cones, and not other subs, like AA or SSA... Any thoughts?

We did a install using kicker amps and subs and I got to reading the fine print on the box lol and I found that there amps were made in korea and I was wondering if there subs were made there too If so , I'll never buy another kicker product again

Friend of mine gave me 2 locked up 9515's to pay off a $250 debt he owed me. I ordered 2 recone kits as my friend says he could rebuild them. I gave them to hit, he reconed them, and they play. Well, one speaker makes a crackling noise at low volumes through it's whole range. At low volumes I can only hear it on very low notes and at higher notes. Did he do a poor job at reconing it? Is it something I did? Are the magnets misaligned? The other speaker is barely audible, I'm thinking that one might be a wiring issue. Any other info needed, just let me know.