Subwoofers / Speakers

Which do you feel would be best? I have a Crescendo BC3500D to power it.

Anyone know if I can get another sticker for the cone for my SSA XCON 15? It came off when I was vacuuming my truck lol

I've been checking these out on the sundown website and a few vids on youtube (obviously don't do any justice) I was wondering if any of you guys have heard about them or have them installed in your cars? I'm considering buying a set for my front speakers.

Oh what I would do for an RLS 15".

I own a Toyota RAV4 with DVD GPS Navigation system.Is it possible to add a subwoofer with NaviDVD in my car?

Hi i have a 1999 Chevy Tahoe and im buying 2 new subs soon. im thinking of going with the saa xcons 15"s or the ssa zcon 12"s which would be better for the lows (40 and lower) the zcons or xcons. also thinking about getting a crescendo BC3500D to power them is that a good amp. thanks

Anyone care to look into the crystal ball and tell me where we will be at in 5+ years for subwoofers? Back Story: I own a near mint 10w7 and a 13w7 in pro wedge box. I'm deciding on selling a lot of my equipment (locally) because I've upgraded (Crescendo 3500) BUT I KNOW in about 5 years time, when I buy a different car, I will be "starting over" and probably starting small - 1k setup. And because I'm nearly giving this stuff away, I'm beginning to wonder, do I store it and use it 5 years from now because I'm saving a few hundred dollars ... or get rid of it, even at a few hundred-dollars loss in hopes that equipment is going to be EVEN BETTER in 5+ years? Besides my iss…

I am looking for a 12" sub. Kinda on a budget. Willing to spend about 220 per sub. I just want the BEST bang for my buck. What do you guys suggest? Thanks

has anyone had any issues with the dustcaps? my zcons cap just flew off today outa no where. im assuming because it was plastic? im not sure but the subs have a fresh recone kit less than 2 days old and bam. i was kinda pissed blaming the recone first but it was so eaily fixed im not considered at all. nothing a littl 2 part epoxy couldnt handle! anyway just wanted to see if anyone else has had this issue

I'm doing a bit of work on my front stage in my 03 mazda and need some ideas on what drivers I should uses for pillars. I built door panels that house rockford P1652-S components running off my old Pioneer GM6000f rms 125watts per side. Sound is crazy clean but I want a bit more. So, I've got plans for building some new pillars that will either house some coaxials or components. I've got a new VIBE DEATHBOXS4-V1 that will rms125watts x 4 channels. idealy, I want to run my P1652-S's and whatever i put in the pillars off the VIBE and my rear speakers (cheap coaxials from princess auto) off the Pioneer. SO: For 125 watts rms, what should I use in pillars? coaxials or compone…

alright, so i went back to the drawing board and got rid of the stuff i already bought. i have since purchased 2 new sets of Pioneer Tweets that come with the stage 4 system and i am thinking about getting these mids to mate up with them. i will be running them active with an Alpine INE-S920HD with the Imprint processor. what do you guys think about this set? i really liked how the tweeters sounded thats why i bought them.

I just installed the ctx65cs component set running of an old Memphis amp. They are seeing 55rms and I am not happy with the sound. Tweeters sound muddy whenever the bass hits, and the mids are severely lacking. I've tried everything on the amps adjustments and every level position for the tweeters, -3, 0, +3. The only way they can sound good is with the gain turned down to where they can't keep up with my subwoofer. Before, I ran infinity reference 6x8s and they had more bass, clearer highs, kept up with the subwoofer, and sounded much better than these. And they were running off stock head unit power. I tried bridging them and they sounded the same. What am I doi…

So i was thinking of selling my 21 warden and goin with a new setup. I thought either 2 18s, 4 15s, or 6 12s but im thinkin 4 15s would be cheaper than the 12s and louder than the 2 18s. I have a 2003 trailblazer and i want to wall it at c pillar while keeping my back seats. I currently have a Crescendo bc2k wired to .5 ohm and i want 4 D4s so i can wire to 2 ohms when i get another bc2k. Id like to put 3k rms to all 4 when all set and done. The thing i need help with is deciding which subs would fit me best. I listen to rap/ hip hop mostly but also country and dance music too. I would want the tuning to be around 34hz. I have around $700 to play with but id go more if i …

I've been doing a lot of reading and searching and I was hoping I could get some additional help. Is there a classification chart as to which SSA subs are deemed "sq" or "spl"? Is it simply the way that they are installed that makes them better geared towards one type of sound? Also, with the greater power handling subs is the "type of sound" the same or as power increases so does deepness, loudness, etc? For example: Dcon - low power sq sub Gcon - mix of sq/spl at medium power Icon - higher powered sq sub Xcon - ultimate high power sq sub Zcon - balls out, no frills spl sub I know my review and thoughts maybe a bit elementary but please feel free to chime in and corr…

More times than not, I see people on Youtube with an extra battery in the trunk instead of having a better alternator. Isn't this just pointless? You can hold more juice, but if you can't replenish it faster than you use it, what's the point of 2 batteries? The only thing I can think of is that it's better because you can charge both batteries when your system isn't playing. Just for me I always have my bass on when I drive so this seems weird to me. EDIT: Another thing that gets me. I have 900RMS and my headlights dim, meaning I may have to replace the alternator and battery which costs hundreds. How do people have 3000RMS and just upgrade their battery? I feel like for…

I have an opportunity to buy TWO practically new T2d412 in box for 600. I know they go for over 500 new not including the box. I also know they are spl subs. My question is a. Is there any reason I shouldnt get them b. Has anyone had experience with the newer model t2s and if so are they musical AT ALL?

Is this possible?

Are amplifiers really needed for these speakers? I have coaxial speakers that replaced my factory ones. My factory ones were 25RMS and my new ones are 60RMS in the front, and 65RMS in the back. They crank up really loud and they are in the factory locations with the factory wiring. I think they sound amazing, but I always hear about amplifiers for these mids & highs. Are they needed?

has anyone got there zcon reconed by ssa? sent mine out over 3 weeks ago and just seeing how long it usually takes

Hey all. I was hoping you all could help me compare and contrast a couple different subs. I’m not going to ask which is better, I’ll make that decision. Just want some input on where each sub may have its strong points, weak points, etc. speaker size is 15”. Amp rms rated power is 2750 at 1 ohm. But after rise etc etc you get the idea. Enclosure will be 3 cu ft ported with about 50 sq in of port. Subs are as follows 1. Sundown Z v.3 2. SSA XCON 3. SSA ZCON So not really looking for someone to help me pick a sub just to tell me any experiences they may have had with these subs, especially if you've used both and any thoughts, suggestions, concerns you may have. Thanks al…

currently i have a Rockford Fosgate punch 501s amp and i want to find a 12 that will run great with that amp.. my amp specs are Bridged Into A 4-Ohm Load: 500 watts x 1 Per Channel Into A 2-Ohm Load: 250 watts x 2 Per Channel Into A 4-Ohm Load: 125 watts x 2 Any suggestions on a 12" that hits hard and clear?...i was looking at the decon 12" by ssa audio only problem is it only requiers 300wrms 4ohms or the sd-2 series by sundown 500wrms 4ohm but thats for shallower mounting depths and i want something that will slump... im open for any suggestions... i would be up for maybe a 15 if i have room for it. if their are better subs out their for my amp then those let me kno…

Found two sa-10s in ported box for 300, not even broke in yet. Is this a good deal?

So I currently have Kicker CVXs upgraded from some MTX Subwoofers that used to have 400RMS. None the less I feel like I don't have the 1000 watts that I should and most people are telling me it's my box. My box is 1.8 cubes and that's for both subwoofers. Kicker barely fits and I was looking as the SA-10 requires .5, so surely giving it .9 each would make it sound REALLY good? It's a sealed box and I'm just trying to destroy my truck essentially. I've got the BRZ1200.1 amp and I hope that these subwoofers will do well in my single cab. I couldn't find the frequency response on these though....if anyone knows can they share it with me? EDIT: Posted on the wrong forums but …

I just sent payment for a used xcon and I'm wondering if someone could help me out. By the pics, is this a current model and if i were to order another 12" new from ssa would it be a matching sub? Just that pics of others seem to have a black spider on them. http://i146.photobuc...9-38-01_429.jpg http://i146.photobuc...19-36-51_73.jpg http://i146.photobuc...9-36-22_312.jpg Thanks!

Hi guys, I currently have two regular pioneer 10" shallow mount subs in the back of my dodge ram. i was planning on upgrading to the the premium pioneer 10"s ( the s4 model) this friday. I have a rocksford fosgate r500 d series amp. the old subs run at around 200-250 rms i belive, and the new ones would run at 300 rms. my amp pushes out 500 raw rms. i am not sure ( despite what they told me at the aduio shop) wether or not my amp will be enough to properly power the new subs. The guy says whenever he does a system with the preium pioneers he uses the r500 amp. However, i'd hate to upgrade only to see a minimal change in performance. does anyone have any kind of experience…