Subwoofers / Speakers

Hello, first real post. Planning an install for my resto-mod 79 Camaro. Would like opinions and any expert advice on some parts selection and install. First my Head unit is a Pioneer DEH-X8800BHS. So far I have the following amps on hand: Rockford Fosgate R300X4 and Alpine A2-S60M. I also have a pair of Polk MM692 6x9 full range tri-axial speakers. I was going to use these in the rear deck with a set of Focal 165 V20 6.5" 70W RMS Polyglass Series mounted in the doors with angled pods. I have the 6.5" door mounted pods on hand but not he Focals yet. I'm considering, instead, getting a Focal ISU 200 8" component set and mounting the 8" woofers in the deck with th…

any recomondations for a ccomponent(2way) set/ amp combo for around $400. I was thinking sax100.2 but dont know what to do for component set.

hey everybody, I've narrowed down my search for 6.5" 2 way component speakers... ::Pheonix Gold RSD 65cs (60/120 watts rms/peak each) ::Massive Audio SK6 (100/220 watts rms/peak each) ::Massive Audio CK6 (130/280 watts rms/peak each) ::Massive Audio TK6 (120/270 watts rms/peak each) I'm not sure of what amp i will be powering the speakers with yet. I plan on running an Fi BTL with them so I'd like something loud enough to keep up with it. What do you think would be the best choice/why... thanks! Andrew

I just picked up an 03 Tahoe. I'm wanting to buy a above average set of components. At this stage vehicle is bone stock. I plan to use only stock locations. Mid around knee to lower knee height. Tweet up in the pillar aiming up towards middle of windshield. Budget is roughly $300 for the pair. Sub stage will be a btl 18 and a saz1500. Will power these components with possibly an older 800.4 fosgate. Looking for suggestions on sets that are out there and any experience anyone has had with these they can share. Prob won't go active, kind of intimidated by it lol.

what are good component sets, i want the rockford fosgate t165, but wanted to hear more opinions and options

Nick/anyone who has heard SI components please tell me how they compare (SQ) to other high end component sets like the focal utopia, k2p, cdt, etc.

Does the crossover in a component speaker system affect the way the mid-bass woofer plays? Reason I ask is because I'm currently using only the mid-bass driver of a component system and it doesnt seem like the speaker is playing as good as it did when the crossover was in use.

I am looking for a good component set that is $250 or less maybe a little bit more if needed. They have to be 5.25. i want some good sounding speakers that can get loud.

Im looking for a good 6.5 component set that is under $300 dollars and has good midbass. dont have an amp now i will get one that will match up good with the components.

I need help troubleshooting a new speaker install/upgrade. I just installed Boston Acoustics in front and rear. SR60 6.5 components in front and SR95 6x9 in the rear deck of a 96 Impala SS. The problem is now the rear sounds much flatter and the front is way too bright up high. These were upgrades to 12 year old Boston 6.5s and Pioneer 6x9s. Old speakers sounded fine but I wanted better sound and a bit louder. Old speakers were 50w rms and new are 80-85 rms. Amp is 100x4 rms and I also have on a seperate 450w mono amp a 300W Pioneer 10' shallow sub in a sealed box inside the cabin, not the trunk. Location of the 6.5 components up front are, woofer mounted in the do…

okay, this is going to be a shot in the dark.a guy came up from Louisville, to a local car audio competition here in Evansville. He was in the sound quality portion. he drives a mitsubishi montero. he said he owns a shop down in louisville. anyway, he let me listen to use front of components and I was extremely amazed at how well they sound. he said they were made by guy in georgia. he told me their name, but I can't remember for the life of me what it was. I believe it was audio something. I know this is an extreme shot in the dark but, can anyone help me figure out what these are? they hadreally nice midbass, they sounded amazing. I got here frank sinatra song, and then…

Hello all, I installed my Pioneer MVH-X690BS head unit last night and it powers up fine, however my Image Dynamics CTX65CS in the front doors are not working. I checked the amps and they seem to be working properly. I have an appointment with a local audio shop tomorrow to help me with the big three install (I can't reach the alternator on my Xterra, what a pain in the ass) and I will ask them to trouble-shoot my components while I am at it. However, I have a feeling I may need to replace the components. I have a Sundown 100.2 amp that does 100x2 @ 4ohms and 200x2 @ 2ohms. I am interested in the RE XXX 6.5C as that is one of the few 2 ohms components I've f…

I need help picking a good set of components. I have 125w rms per channel to run them on and I need 6 3/4" size woofers. The amp I will be using is my US Amps USA-300. I don't really care about how loud they get, but I want to have the best sq that I can get. My budget is around the $500 - $600 range. Any help is greatly appreciated!!!! Edit: I forgot to add that I listen to just about every type of music, so they must be well rounded.

I am looking to buy a new component set for my Jeep. I have a Sundown Audio 125.2 amp and i want to do a passive crossover setup. I want them to be loud but sound good as well, I am also selling my new set of CDT speakers, if anyone wants more info on the set I'm selling let me know. I am basically looking to spend $150-$250, if anyone has any recommendations please let me know. Someone told me to buy these: http://www.woofersetc.com/p2571/MM6--Polk-Audio-65"-Momo-Competition-Component-Set.htm I'm wondering if anyone has used them or has a review on these

So i'm trying to find a good component set for my 2004 explorer. The stock speakers are 6X8's. when it comes to components speakers, i don't really know much of anything. i need 2 sets, (4 speakers together) and my price range is near $150 a set. (perferablly lower, of course ) i was looking at the Infinity Kappa's 680.9's. anyone have any experience with these or other Kappa components? I got a 18" btl and a saz3000d, so i really need to get rid of the stock speakers. no rush though, i still have to buy an Iraggi Alternator and a Kinetik for the car before i start on components. (but they should come quick, im selling alot of stuff on craigslist) I'm looking mainl…

Can you guys give me some recomendations for good component sets(2 way)/amp combination? I am looking to spend around $600.

I have about $150(ish) to spend on a nice component set. They're gonna be going into a 2005 grand prix. I just wanna hear your guys opinions on what you guys would buy. I was looking at the bravox cs60k, if you have any experiences with these or any bravox in general let me know. If you need any more details then let me know.

Hey guys, I'm on the market for a new set of comps. I'm currently running some old-school green Infinity Kappas that are good, but it's about time to retire them (they're about 10 years old). I plan on auditioning sets before purchasing, but some other viewpoints would be appreciated. Specifics Enclosure - custom sealed kick pods (will be having them made soon) - I have Q-forms kick "pods" now, but they aren't enclosed - so it makes my current set sound wimpy. Size - 5.25" set Tweeter - preferably silk, but I'm not opposed to metal domed tweets Amp - MTX Thunder 4320 front channels (around 80 watts per side) Music - I listen to dynamic, melodic metal the most, from acou…

Hey all. Question, I'm looking at some component sets and have come across both Pheonix Gold RSDs and Arc Audio 600.6 sets and really like both. RSDs are $40 cheaper, but what do you think of arc audio? Are they worth the extra $40? Thanks Arc Audios Pheonix Golds

Are there any updates forthcoming for the Kicker Component sets? I'm still pondering about what to replace my CDT's with. Not too much info on the home page... Thanks -Nick

I'm looking for a good component set to pair up with my SSA Xcon 10 for my 350z! The doors have 6.5" speaker sizes, but I've also found custom door panels made for 2 speakers (looks like a 6.5" and a 5") Link - http://www.wickedcas.com/gallery/v/wcasdesign/Cutomdoors/100_0968small.jpg.html I'm planning to get the RF 600.4 amp so I'd be looking for something around the 150rms range -Kyle

anybody know of any good component sets for around 100$,size 6.5 with 1 inch tweeters.i been lookink at kiker ks but there around 150$.

ok so i looked around and found some speakers i like. they are Hi Vi D6.8 and SEAS 29TAFW. i plan on running 4 of the hi vi and 2 seas' up front. what type of crossover would i need to make this compatible?

Hello, i've been looking around on these forums trying to find a decent 5.25 component set. I found a guy that decided about the dreamline and have heard people praise these before as well (people seem to really enjoy rainbow). I will be unable to make my own kicks(no faith in myself), and do not have anyway to have them made by someone else near me (sucks). I realize putting these speakers in kicks are going to be my best option of placement. So therefore i'm going to have to go with q-forms ( i will be putting sound deadening in them, i heard it helps ) and the max they can hold is about a 5.25. The speakers i put in them will also need to work well IB, obviously. I wil…

With my components the crossover has -3, 0 and +3 dB what do most people use? I will be right at the sets rms maybe a little over but not by much.