Subwoofers / Speakers
Discuss Subwoofers And All Aspects Of Speakers here.
6,865 topics in this forum
-
this is the best 8'' sub i ever seen i thought my 1508 and 1008a was the shit but the sa-8 is a monster 0.90@35hz testing tomorrow sa-8 next to lil mtx 8'' my lil girl thought it was a cool toy
-
0
Reputation Points
- 17 replies
- 1.5k views
-
-
i need to know the mounting depth of both, as well as mounting diameter and overall outside diameter. i looked at the SI website and can't find it. i've also used our search feature to no avail. thanks ahead of time. oh, and sub displacement would be nice too. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
-
0
Reputation Points
- 17 replies
- 2.3k views
-
-
Currently I am Running a 15" Fi Q ported in a 4 Cu. Ft. box supposedly tuned to about 32-33hz and stock speakers in a 99' Volvo S70. I am missing out on some hz's like above 60ish probably but i want some more lows... so what im thinking of doing is for now get some midbass speakers (or maybe even just some good 6.5's) so play from like 65-70hz up and leave the rest the same... then later replace my 15 with an 18" Q tuned at 28 and then bring the midbass down to like 60-65...? does this seem logical? Also would a 18 Q in a 5 cu ft box work well or do i need to get closer to like 6 or 6.5
-
0
Reputation Points
- 17 replies
- 976 views
-
-
I have had weird issues off and on with my amp (teac 200.1) and my components( phoenix gold radials ran passively). little things like sounding muffled at start up in cold weather. I bought the amp on here a few years ago for $15, so no big loss. The other day i was involved in a fender bender and the power wire from the front battery to the back came undone. I didn't notice this until a few days ago. The tip off should have been that the sound deteriorated over the course of a week . Yesterday I took an old speaker and some wire and tested the amp and rca's for a clean signal. Left channel is dead and right is static-y. I said screw and attempted to run my components off…
-
1
Reputation Points
- 17 replies
- 1.9k views
-
-
I'm looking to pick up some new subs for my truck. Looking to keep it stealthily looking. So ether behind or under the rear seat of the truck. I have a crew cab Chevy. I'm looking at Alpine 10" swr-t10 Jbl ms-10sd2 Sundown Sa-10 d2 Sundown SD-2 10 D4 Sundown SA 8 v.2 D2
-
1
Reputation Points
- 17 replies
- 1.4k views
-
-
Just looking to see what the recommended sealed enclosure for a MLI-65 would be.
-
0
Reputation Points
- 17 replies
- 1.9k views
-
-
Im getting a new vehicle as soon as mine dies which is going to be in a couple of months im upgradeing the system as well with the nw purchase so with that said I need suggestsions on cars that 2x 15" SI D2's will fit in. I also need good gas mileage i seem to drive alot and my current car sucks my money... so any suggest is welcome thanks.
-
0
Reputation Points
- 17 replies
- 1.6k views
-
-
Was goofing off on Fleabay, and saw these...14,000 for some 6.5 comps and a 400w amp? WOW! They do have a used set for only 8K. http://www.ebay.com/itm/Critical-MASS-audiophile-6-5-inch-complete-Front-Stage-Amplified-System-CM654a-/321336314419?pt=Car_Speakers&hash=item4ad1230a33 Can they really be that much better? I think it is funny that they state 400w rms but pair them to 100w/channel amp. Makes these 5.000 dollar Morel's look like walmart speakers! (not knocking Walmart speakers- I have a set in my burb.lol) http://www.ebay.com/itm/MOREL-SUPREMO-602-6-5-2-WAY-CAR-AUDIO-COMPONENT-MIDS-TWEETERS-SPEAKERS-NEW-/400605811874?pt=Car_Speakers&hash=item5d4…
-
1
Reputation Points
- 17 replies
- 3.6k views
- 1 follower
-
-
I want to upgrade from a JL 12W0 getting 250 watts rms from a Boston GTA1005 in a Dodge Challenger coupe. I would like more trunk space, so any enclosure over 2 cubic feet will not be considered. The GTA1005 will not be replaced, it puts out 250 rms into 4 ohms and 400 rms into 2 ohms. I was considering the following but will certainly entertain other ideas. Thank you for your opinions and advice. 1. JL stealth box- JL 12W3- 2 ohm 2. 2 Sundown E8s in either ported or sealed. Plan to remove the rear 6 1/2" stock rear fill and fire subs through the rear deck into the cabin. They'll be getting 200 rms each. 3. Single JL 8W7 firing through the factory cut out in rear d…
-
1
Reputation Points
- 17 replies
- 1.9k views
-
-
If u had to run 1 12" sub in a sedan trunk set up which one of these listed below would u choose and why. Sundown ZV4-12 SSA ZCON-12 AA Mayhem-12
-
2
Reputation Points
- 17 replies
- 1.9k views
- 1 follower
-
-
Hi I have a 2008 BMW 328i Sedan with the standard Hi-Fi stereo system (1" tweets, 4" midranges, 8" midbass) I been looking around E90Post to see what people have been replacing their components with and found that most put Focal, MB Quart, Morel or Earthquake (for the midbass). However, after looking around other places, I saw this brand that calls themselves the best when it comes to SQ? The brand is Hybrid Audio and they have a bunch of trophies from SQ competitions. I want to put the very best as I drive this car a lot and dont want to be worrying about upgrading in the future. This is the "best" they offer = Legatia L841-3 Pro Component Speaker Set Exactly what I need…
-
1
Reputation Points
- 17 replies
- 2.9k views
-
-
HellO all . I need a little help just got my Rl-i 12's A few days ago. still dont know what zmp to get. I got the dual 4 ohm . Im kinda loking at the octane-R 8.0:1 but dont kno the full specs of this amp. dose it run 1 ohm stable and if it does what wattage .Is it 800 rms at 2 ohms or is that just peak power? nsorry new to the whole sounds thing . planing on making one box for each sub about one cbf 2 one & a 1/4 cbf. if I could get some help or sugestions on amps for these sub it wuld be great .
-
0
Reputation Points
- 17 replies
- 1.7k views
-
-
Sucks that Mach5Audio is leaving the forum. Im personally a little bummed that their products wont be so readily available and discussed on these forums. I am in the middle of an install using their speakers and think highly of them so far. Ive already sent an email to the addy from the notice thread but thought Id talk about it here as well. Just wondering if the MLI65s will still be available? Or any of the other products that were listed? Id love to use some in another install and always planned on buying them here.
-
2
Reputation Points
- 17 replies
- 2.3k views
-
-
Looking to buy either two 12 inch or 15 inch DCON D4's whether in enclosure or not
-
1
Reputation Points
- 17 replies
- 3.7k views
-
-
so i found a just like new rf power hx2 15 for $200 but im trying to find sumthing a lil cheaper or atleast brand new that will satisfy. i've been thinking bout a sa-8 or orphan 8 and was wondering what the most power i should put to one daily to get the most output......im interested in any ones suggestions for single sub in the cab of a 76 caprice. going for spl not sq but wanna spend under $200 and run about 1000rms
-
0
Reputation Points
- 17 replies
- 1.3k views
-
-
ok im sorry but after reading some threads on here people need to know! all these this sub VS this sub threads are pointless unless your comparing 2 way different subs like a btl an cvr most time its gonna come down to install. i think the saying goes 90% install 10%equipment! honestly almost every sub can be made to do whatever you want if the install and overall setup is right! then people are asking which sub will have better SQ and honestly no one can answer that, 1) everyones opinion will differ on what sounds good 2) what is a good way to compare SQ again every install is different! people need to understand every speaker is just that a speaker theres not one thats …
-
0
Reputation Points
- 17 replies
- 1.2k views
-
-
hey guys whats up, i went to go order my BTLs today but at www.ficaraudio.com there is no longer a place to order them? do you guys know if the website is just down or is something else going on? thanks
-
0
Reputation Points
- 17 replies
- 1.7k views
-
-
I've heard as a general rule to have at least 12in^2 of port per cubic ft. Is this solely to keep port noise down? Reason I ask is because a box size I've tinkered around with for my next build has 8.5-10in^2, yet in Winisd Pro it shows to only have a port velocity of about 60 ft/s. I've heard anything under 100ft/s is fine. Am I missing something? Facts wrong maybe?
-
1
Reputation Points
- 17 replies
- 3.3k views
- 1 follower
-
-
I noticed that FM signal (radio) songs play with a lot more bass, and I mean A LOT more. When I listen to the exact same song using my iphone, some songs sound dead. I can tell there is a huge difference. I understand some radio stations boost their signal or use EQ, but why is the difference so noticeable?
-
0
Reputation Points
- 17 replies
- 2.8k views
-
-
I have a small car and having a family and all that am currently trying to use smaller and smaller audio solutions to maximize space to the point where I really don't even want a subwoofer in my trunk anymore. I really don't need very much bass, just something to fill out the lower end but I want an all in one sub so that I don't have to use anymore space for an amp, etc. So I know under-seat subs are not discussed nor recommended here but I was about to pull the trigger on one and then noticed that the Pioneer TS-WX70DA is now under $200 and it's a loaded horn design. But what interested me in this particular one is the below picture showing how thin it is and that…
-
0
Reputation Points
- 17 replies
- 5.3k views
-
-
Will be using them for SPL competitions in IASCA.. will post my scores here.. Power - 2 Sundown SAZ1500Ds Batteries - 1 Powermaster D2400 up front and a D3100 at back Powermaster 140A alternator Headunit - Pioneer 6000UB Preamp - Soundstream 6XO Audiocontrol 6XS Crossover some hott dust caps! stitched tinsel leads, nice! the score to beat is 150.5dBs on the termlab (151.6dB AC) i made using a pair of Audiopipe TXX 15"s name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344">…
-
0
Reputation Points
- 17 replies
- 4k views
-
-
Whats up, Im not really wanting to this be a VS thread really, Im just looking for some last minute opinions before i order, i have the cash in hand which ever i end of picking which will probly be tonight or tomorrow morning. These 3 were chose because there close within budget. These Would all be pair's also. American Bass Xd 15 - 3" Coil, "Rated" 700rms (the 3" coil is talking to me lol, gives me some upgrade room) Soundqubed SDC2.5 15 - 2.5" Coil, "Rated" 600rms(i know they take alittle more from exp) SoundQubed HDS2 15 - 2.5" Coil, "Rated" 600rms(not much info on it) These are all simliar in price(at least for what i can get a pair for), and im trying to decide bu…
-
0
Reputation Points
- 17 replies
- 2.3k views
-
-
hey guys, i normally dont put aftermarket door speakers in my car bc i have never had anything loud enough to need them lol, but i got an 18" fi q and its pretty loud. my door speakers are in the process of becoming blown lol, so im looking to upgrade...i dont really want to run an amp, would like to just do some speakers, preferably that will fit in the stock location. it will be in a 2003 ford focus zx3. the stock speakers are 6x8 and 3 inches deep. any help would be greatly appreciated. thanx guys.
-
0
Reputation Points
- 17 replies
- 1.4k views
-
-
Hey everybody im trying to decide what to upgrade to. The above listed subs are what im considering, I listen to mostly bass heavy music like dubstep, and swisha house or any other kind of screwed music. I plan on putting the new sub in a slot ported box not 100 on the tuning just yet the sub will have to be dual 4ohm and im going to be powering it with a R E Audio DTS-1500.1 which is rated at 700x1 at 2ohms. Everybody just let me know what u think?? P.S the sub will be in a 91 civic hatch and will be a 12 thanks all in advance D.
-
1
Reputation Points
- 17 replies
- 1.9k views
-
-
Normally i would put this in the SPL forum but they dont move very fast. Im looking at Inviminator's new 187's, Used LI's, a single SX 15 and then there is a possibilty for an older Magnum SI. We are talking a structly SPL set up with around 1kw of power to deal with. im going to be running an Amature Street 1 with MECA and Street B with dB drag. Which has more SPL potential and room for error?
-
0
Reputation Points
- 17 replies
- 1.8k views
-
Who's Online (See full list)
- There are no registered users currently online