Subwoofers / Speakers
Discuss Subwoofers And All Aspects Of Speakers here.
6,865 topics in this forum
-
-
Currently I have a Boston Acoustics G512-44 on a Rockford P1000-1bd. I have it sealed, running at 2-ohm, I like the way it sounds. I listen to mostly rock/rap, with the occasional classic rock and R&B. My goals are to have more output, but still keep accuracy. I really enjoy a tight double bass, and love the deep bass from rap. My G5 plays double bass really good, and hits lows alright. I know I could build a ported box and try that first, but I would like to try something new. Height wise, I cannot fit a 15 inch sub into my trunk, but do have quite a bit of room in there. I would like to stay sealed box, and maybe run two 12's or something. What would be yo…
-
1
Reputation Points
- 19 replies
- 2k views
-
-
The shipment arrived today, I hope to get everything up on the shop tonight, if not tomorrow. If you have questions about an order (lower 48 remember), email [email protected] .
-
0
Reputation Points
- 16 replies
- 2k views
-
-
Hey everyone i'd like to hear some opinions on what i want for my sub stage. I want to get rockford fosgate. here are the options im thinking.. 2 12" P3's sealed or ported? 1 15" T1 ported 2 10" T0's ported 1 10" T2 ported Will be getting 1000rms to them. I've asked all my friends and their opinions are scattered lol. What do you guys think I should get? I want good sound quality and loudness as well.. id go for more sound quality than loudness but if i can get loudness too that would be great. Im leaning more towards the 1 15" t1 or p3s sealed but idk.. will be in a honda civic coupe, and in the trunk. thanks again guys cant wait to hear some feedback.
-
1
Reputation Points
- 11 replies
- 2k views
-
-
I was wondering if the spl subwoofer line by mach 5 is strickly for spl because I would like to use one in a daily setup. If you have one or heard one, what do they sound like? For example, could you compare them to say a Type R? I already know Mark's opinion, but I would like a few others
-
0
Reputation Points
- 14 replies
- 2k views
-
-
I picked up 2 re sex10 subs for super cheap and would like to know if its possible to recone them to SSA con recone kit? I'd like to try doing a recone but would rather not do a nice new sub. I know its probably dumb but is it possible? Both are 4 layer 3" VCS but I'm sure gap etc would come into play. Thanks
-
0
Reputation Points
- 17 replies
- 2k views
- 1 follower
-
-
Hi guys, I need 2 12" subs for a friend of mine. He has an MTX TE 4000 to run them. He doesn't really know what to get. He drive a small car (renault Clio) with a hatchback. He will be able to fit a 3 to 3.5 ft3 ported box in his trunk. He's still undecided ! AA Mayhems are his first choice, but I asked Some info about the DC Level 4 xl, and he saw the Orion HCCA. He seems to like the Orion. But we never listened to any of those subs. What do you think about those 3. I think the Orion is not the best choice, but when he reads the specs, he likes them : low Fs, high sd, big motor !!! What can I tell him to choose? All those 3 are in the same budget , with shipping.
-
2
Reputation Points
- 17 replies
- 2k views
-
-
Ok well i extended the end date to the middle of Feb. All orders must be in by Feb 15th. I have so far 8 drivers of the 6.5s. Here's the info i posted earlier: -------------------------------------------------------------------------------- Ok well here's the thread. Its for Tang Band 6.5 and 8in subwoofers. Must have a total minimum of 20 or more of any driver sold in the group buy. if 20 or more aren't bought, these prices will not apply but i can still get you them. Sorry the 5.25s are out of stock until April or so. If interested in plate amps please PM me and we will see about pricing on it. 100% of the order can either be paid at time of signing up or by the 15th of…
-
0
Reputation Points
- 18 replies
- 2k views
-
-
hey guys on Fi's site I was lookin at their 12 inch IB3's and its not showing any cubic feet spec's for a ported box...... why not? I was thinkin about gettin those instead of the SSD's because they call for a lower rms and the xmax is more..... and they're a lil cheaper too.
-
0
Reputation Points
- 16 replies
- 2k views
-
-
Pics to explain what I've been busy doing:
-
0
Reputation Points
- 15 replies
- 2k views
-
-
I just noticed that Alpine improved their woofers and they seem to be much better than before. Alpine electronics With the addition of a pole vent, slimmer mounting depth, and bigger motor. I'm not really a fan of many mainstream manufactors but i'm curious to see how these do. Anyone hear about them yet?
-
1
Reputation Points
- 16 replies
- 2k views
-
-
I've got a box for a single 12" just sitting in the garage and thought I'd put it to use. I'm looking for some recommendations for a cheap twelve. This is just something to get me by for a while so I'm only looking at spending around $50 max. The box is just over 1 cubic foot (something like 1.12 I think) and the cutout is a hair over 11".
-
1
Reputation Points
- 16 replies
- 2k views
- 1 follower
-
-
For box purposes, I am looking to get an idea of the weight of the 15 inch HDC3 and the 2009BL. I know my old BL was around 34 pounds but I know the new ones are heavier. Any info would help. Thanks
-
0
Reputation Points
- 14 replies
- 1.9k views
-
-
So, i've downed to 3 subs, IA Death Penalty 12", SSA Xcon 12" or Fi BL 12". Will be getting 2 subs. The amp that will be powering them will be the Crescendo Audio BC3500D. Max box size is 52x24x17. I listen to pretty much anything but mainly rap and hard rock. If theres something else I forgot to mention let me know.
-
1
Reputation Points
- 17 replies
- 1.9k views
-
-
i need some mid's with killer midbass, enough to blend in well with my horns and ported idmax. here are my amp specs: MA Audio m283i 2ch # Frequency Response: 20 Hz - 20 kHz # Full Mosfet Circuitry # Selectable Bass Boost @ 50Hz # 50dB Channel Separation # 90dB Signal Noise Ratio # 22K Ohm Input Impedance # 200mV-2V Input Sensitivity # THD <0.05% # Selectable Crossover: LPF, FLAT, HPF # 50Hz - 250Hz Low Pass Filter # 50Hz - 250Hz High Pass Filter # Selectable Bass Boost (0db, 6dB, 12dB) # 2 x 100W Rms @ 4 Ohm Stereo # 2 x 200W Rms @ 2 Ohm Stereo # 1 x 400W Max @ 4 Ohm Bridged # Fuse Rating: 25A x 1 could yall suggest something? theyre most likely gonna be in the doors …
-
0
Reputation Points
- 20 replies
- 1.9k views
-
-
i was just wondering how much the dc level 4 xl 18" subs cost ... cant find a price n e where ... i was thinking about buying 4
-
0
Reputation Points
- 2 replies
- 1.9k views
-
-
What do ya'll think of the Tang Band 8's??? ...like three or four sealed.
-
0
Reputation Points
- 17 replies
- 1.9k views
-
-
hey kids im back, i have a crescendo audio s1500.1 ( one of like 6 ppl in america) that will power the 12. it'll go in a ported box tuned to 28hz and running at 1 ohm. i listen to rap and so-called 'RnB', i also have alota slowed and throwed/chopped songs. for the box, i would like the dimensions to be 13.5 inches high, 13-14 inches deep and 26-30 inches long ( idk what that comes out to) but after displacement i would the sub to have 1.5 -1.7 cuft to itself. nonetheless, the smaller the box the better. i also have a kenwood HU and i know the volume goes up to 34. i would like the sub to kick ass at 14/34 (if that could be done 17/34 would be the loudest i would listw…
-
1
Reputation Points
- 14 replies
- 1.9k views
-
-
While we were testing the new Mag we decided to play around with some old BM 10's. We put eight 10's in an SPL car that had no alternator, 5 batteries, and a single SAZ 3000D. The first burp was in the 154's but we ended up getting it up to a 157.2 without too much trouble. Keep in mind the batteries had no charger on them for most of the test and when a carger was on them it was a little portable (about 12" by 9") charger. Oh yeah, this was all done on a Term Lab meter.
-
0
Reputation Points
- 13 replies
- 1.9k views
-
-
I have a Regular cab dodge... I have narrowed down to 2 options 4 sundown E 8's off a sundown 1000 or 1 12" Fi BL off a sundown 1200 Looking for LOUD SOUND QUALITY This will be going with a active setup with hertz hsk 165's, alpine 9887 and a sundown 100.4 What would you guys recommend? 1 12'' or 4 8's
-
0
Reputation Points
- 21 replies
- 1.9k views
-
-
Wow, Sorry for the blow up on my last post lol I was trying to find out a little more about the SSA woofers. I read great things about them on these forums, and what Fi has to do with manufacturing couldn't matter less to me. I joined this site after I placed my order for my SSD 10s. I was really not familiar with either companies, but I just happen to stumble across both brands while looking for drivers for my new vehicle. Now, all that aside, not looking for another locked topic. My original questions was how the new G-Cons would compare to the SSD drivers. I know they are new, and there prob isn't much for customer reviews. My main question I was looking for was where …
-
1
Reputation Points
- 15 replies
- 1.9k views
-
-
Mark, I was just wandering if your SPL 10 or 12 is getting close to production? thanks
-
0
Reputation Points
- 17 replies
- 1.9k views
-
-
Im looking two get two new subs. What would be a better buy. 2 12" Alpine Type R subs (4ohm) or 2 12" Rockford Fosgate P3 subs(4ohm). They are being powered by a US Amps XT2000D amplifier and will be wired at 1ohm. In a sealed box. I am getting both at the same price but i dont know which ones would sound better. And im also looking at getting some new speakers, debating wheter to get the Alpine Type R 5x7 SPR-57C or the RE Audio RE5X7FR. Any help with this would be much appreciated. Thanks
-
0
Reputation Points
- 7 replies
- 1.9k views
-
-
-
That is all
-
0
Reputation Points
- 23 replies
- 1.9k views
-
Who's Online (See full list)
- There are no registered users currently online