Subwoofers / Speakers

hey guys..well i found a guy pretty close to me that has a 2512 d4 for sale and im wondering how much these usually go for? Because either this price is pretty low or im way off in guessing how much they go for..by the way..he said 100 bucks takes it.

Alright to start off I'm new here and I am in no way imposing the w7 to be the end all sub woofer. Well it seems like everyone around me is trying to run the mojo of the w7. I want to sound better and get louder than my uncle. He has a 12w7 ported at 2.25bubes at 32hz on a pdx1000.1 this in my opinion is loud enough. I plan on getting two 10' q's. I am unsure on what to power them with. Probably a sundown 1500d. I can put the subs in boxes about 1 cube net I am not sure on what to tune it to. But Do you think I will be able to out slam his setup?

First off I would like to thank Mark for allowing me to test these at no cost to me. Ok Here it goes. Initial Impression: When I got off of work and walked around to my front door I saw a box that vaguely resembled an extremely used soccer ball. It was brown and taped up and kind of rounded at the corners. I quickly tore into it and got a peek at these things. I can tell you these are built to the highest of quality. No glue on the surrounds, the surround fits perfectly in the sunken surround landing. The bead of glue on the spider was even all the way around. They just looked high quality. Not fancy high quality like a Ferrari, high quality like a cleanly built RX-7 (no…

I don't know what to choose for my 07 yaris sedan soundstream LOS 6.5 component $235 Soundstream Xtream Component $188 Focal Access 1 component $224 Focal Polyglass Coax $217 if i go for focal should i go for the acess component or the polyglass coax because these two have the same price. Anyone heard the soundstream before?

I

I they say 2 ohm why do they measure 1,5 ohms

So I need some testimonials. I've read most of the threads related to them on here, I just want MORE! nah not too much. I've just gotta nut up and do it. I'm thinking about putting a 15D2 in a 3.0-3.5 cubic foot ported box, one tune to 32 hz or so, another to 45 or so. How much port area does this sub like? Also, I'm a fan of quick, tight bass. Will this setup deliver for me? I'm forward-facing it in my trunk, and sealing off behind it. I was just a little worried because the group delay is 2.5 times that of my current setup of four sealed flat cone ED 12K's. And the Le on the D2 seems high, but does it make a difference if the sub is wired in series or parallel? …

I am purchasing 2 zcon 12. Are the box specs givin for these net or gross volume?

My buddy has a 13w7 and burnt up a friggin voice coil on it with only like 1100 watts, how is this possible?? It wasnt overpowered, it was professionally installed in a ported box, and plus i thought it was supposted to be VERY difficult to do that to a w7??

I have a buddy that had someone put his system together and they put in RF P1 10's. How much better would it be to recommend a DCON instead (SQ and SPL)? One thing also, is the P1's are single 4 ohm and he has a 600d1 or something, so my guess is 600rms at 1ohm. right off the bat, I would think the DCON's would be better, because he can get them in dual 4's, and run it at 1 ohm. (he does have 2 10's) Any experiance would be greatly appreciated. I don't want to look like an idiot if I gave him the wrong answer.

http://www.teamtoxicbass.com/%7Etuan/subwoofers.htm damn!

As the title says, im looking to replace my 2 10s and Im having trouble finding some that work well in my enclosure. Its a sealed dual 10 enclosure with 1.1 cu ft for each sub. Everything I have looked at has an optimum sealed enclosure of .5-.8. Anyone have some suggestions for me, price range would be around 500 for the pair. Thanks

hi all! im a college student that is sick of not being able to purchase high end audio equipment but loves music. So i did a little research and stumbled upon the mj18. I've decided to do my first DIY sealed subwoofer using a single mj18 and buttkicker amp. I do know that they recommend 2.8 cu ft for a sealed mj18, but It looks as if alot of people are using larger boxes. Since im new to this, im uncertain as to why many of you have deviated from the "recommended" size. I would greatly appreciate if you guys could give me some tips, recommndations, and possibly some box dimensions on building my first sub without using a eq. I will most likely be using 3/4 mdf or plywood.…

So here we go... Backed by QSC(three PLX2,two PowerLight,one RMX),Crown(two XTi,two iTech) and FaceAudio(one TS-1200). Bas depravation does not live here.

this is my first real post, so here goes... i am saving money for my 1st system and im lookin to do it right the 1st time ive looked at rf,re, and anything in between and now my intereststs have landed on the 12" magnum d2 i am currently workin on a custom center consol in my 2002 s10 REG CAB, so my options are limited now for the questions: 1. what kind of volume/tuning would be good for like a 60/40 or 70/30 spl/sq setup? 2.what amp would match up with that setup nicely? 3. yall are gonna hate me for this one but....how does it compare to a 12w7 in the same box/amp setup? i understand this is alot for one post but im a complete newb to the magnums, so any info/suggestio…

Click here: Mag and BM pics!!

Would odd numbers sound better than even numbers or louder 1 vs 2 3 vs 4 5 vs 6 I no cone area plays apart but if all was on the same amp...what would the out come be.

Hello folks my name is David and im glad to be new member here. I have 00 s10 extended cab and currently bad subs now lol three yrs later 2-10" re audio sxx d2 in 3.50cubic ft box shared tuned 35hz with mtx 1501d and upgraded electrical system. well since i was low money wise do you think that the soundqubed hds200 10"s would be louder then what i had? considering amp is rated 1500rms@ 2ohms and subs was rated at 1100rms each but the soundqubed hds210 is 600rms each wouldnt it be just as loud or louder considering i would have enought power to push the subs instead of being 250-300rms short of the subs rating rms. I went ahead before this post ordered two of the sq hds210…

I am interested in buying a subwoofer or two for my new daily driver system. They will be powered by a US Amps AX3200de with all proper electrical requirements. I have a 2004 Chevy Tahoe and box size is no concern to me. I also am installing some second skin damplifier this weekend along with an arc audio fd4150 and two pairs of eclipse sc8365s. I am interested in having a SQ system with a lot of output (I am settling with the door speakers I have for now, heard they are not the best for quality). I listen to a wide array of music but mostly southern rap, metal, trance, and blues. Also, if possible, I love deep, low bass so don't hessitate to recommend a subwoofer w…

Well since it's an extra long weekend for me I'd figure that I would do a quick comparison between the two woofers. The box used is my current home theatre box, which is about 8.5 cubes tuned to 18 hertz. The amp being used is a Dayton 1000 watt plate amplifier that does 1000 watts @ 4 ohms. Impressions of both woofers: RE SX18 I've owned the RE for about a year now, and it's made its way from the car to the house. The packaging was nothing more than unimpressive. A single ply cardboard box with 5 pieces of stiff foam keeping it in place. It's about 26 pounds and looks pretty sharp. The basket is pretty much identical to the Mach 5 SPL series (only not milled down). The t…

First, let me just say that I don’t know much about car audio. 95% of people on here would put me to shame so forgive me if what I’m asking is impossible. But I do know a fair bit about audio in general since I do a little mixing music on the side. So here’s what I’ve been recently thinking about… I have a system, with ONE 12” Eclipse Titanium in a ported box tuned to about 30hz. My sub hits the lows real good up until around 60hz, but doesn’t pick up anything above that. Check this link to hear what my system picks up (it’s a clip of a song that I filtered the music out of and just left the bass that my sub picks up…you may not be able to hear it on your computer speaker…

Any one had experience with any of them I've heard a ton of good things about the ab xfl not sure what route I'm going to go will be in a sealed clamshell I want to be able to slam lows but still put up a decent number

This was turning out to be a good day after I had such a bad day...... Then it got worse. Upon running to the door to greet the FedEx man, I open the door and see him speeding away...... Wait a minute, where's my other 15???? :boxin: Nick, check your mail. B) Isn't she purty lying next to a POS Fultron 10"??!!!!! I must say, I am overjoyed with the build quality on this thing. There's little details that I was not expecting and I'm actually overwhelmed by this thing. And anyone who knows me will tell you I rarely get like this over a driver. I'm, usually critical of everything. Well SI gets an A++ in my book. I'll add another plus when somebody finds my other 1…

Has anyone heard the True Bass Solutions Ultra 10 subs? If so what are they comprable to.

i have a 3500d and was wondering what would be better in all aspects and sheer output? would the BTL's fully loaded or nightshades be better in my situation. either choice will have box build big enough due to it going in an suv and tuned between 30-35hz might change what i tune it too, but it is for a daily set up. and if anyone wannts to throw in opinions about the xcon or ia death penalty feel free. electrical is 250h/o alt, with 3 batteries including the one under the hood. subs will be facing up with port back. port will be running along the bottom instead of right or left side.