Subwoofers / Speakers

Hey guys I need to know which sub be the better sub to run on my 3k Does anyone had these subs ? ascendant audio mayhem or fi sp4

Currently I have a 15" Fi SSD in a ported enclosure with almost 4 cu. ft. It is by far an amazing subwoofer hitting very low notes and hitting them hard. Recently however, I bought another 175 x 4 wrms amp and 6.5" component set that I am currently installing. That leaves another two channels that can be filled up with two more speakers, and I'd rather not use it on rear door speakers. My current subwoofer, does not give the desire punch that I want, and I was wondering if I should buy two woofers or mid-bass/mid-range drivers. Will these give me that punch fill that I want in my system, or should I instead go with two 8" subwoofers for punch. Another question is what cre…

just out of curiosity, how would you say the magnum d2 stacks/sounds compared to a 12 inch idmax V.3 D2

I have an issue with my amp protecting at a high output. The subs are wired to ohms in an 8 cube enclosure tuned at 38. When I take it into high volumes it gets louder without distortion. When it starts getting to its peak my amp throws a short circuit protect. Is it possible that one of the coils have an issue? Or possibly amp? The setup is four fi ssds on a stetsom 7kd. Also coils read exact same on each eight coils.

Guys, Sorry wrong title I don't know how to edit title What will you choose between these two setup 1. DC Level 5 15" will be powered by Amp 3,000 watts or 2. Warden 12" will be powered by strapped two 2,000 watts amp. Both will have sufficient power to back them up.(HO Alt, batteries and big3 ) Thanks in advance!

I have a question.. Just brought a AU-SPL 12 dvc 4 ohm.. I see is that only connection to 2 ohm amp.. Is there a way i can connect to 1 ohm amp from dvc 4 ohm single sub?

I have a really big van. Plenty of space for a huge ported box, so i should be able to underpower the subs a little. I'm hoping a bunch of MJs will be louder than the (4) 15" FI SSDs i have now. A pair of saz-1500 strapped were tested to do 3740 watts at 12.8 volts. A single MJ-18 is rated 600 watts rms (6) 8 ohm MJs could be wired to 1.34 ohms (8) 8 ohm MJs could be wired to 1 ohm Can I do more in a huge ported box or should i just keep my SSDs?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5748711194&rd=1 I sent the guy an offer on a pair of these. We'll see what he says. Wish me luck!

any thoughts on what the best sounding enclosure for these subs are? I would lean towards vented for the boom, what do you guys think, gonna build a box for one soon. I want deep sounds, also some snap when I need it though.

I want two sundown sa 15s, but I dont know whether to get D2 or D4, and what amp to get either. Any help will be appreciated greatly!

I wanted to know how many DB's you all think I can get out of a pair of these subwoofers? American Bass VFL Series DVC Subwoofers Common Features: * Dual 3" 6 Ohm High Temperature Voice Coils. * 1.4" Wide Multilayer Foam Surround for Better Stable Linear Exclusion. * Non-Pressed Black Treated Paper Cone. * Vented Deep Bumped Back Plate * 180 Ounce Double Stacked Magnet Structure * Dual Black Mirror-Image Spiders For Linear Stability. * Sleeved High Power Tinsel Lead Wires to resist Lead breakage. * Blackened Motor Parts for Superior Heat Dissipation & Long Life * Hyper extended Pole Piece Increases Accuracy, raises Induction. * Deep Bumped Back Plate to Increase Power…

This guy at this car audio shop dropped kicker line because he said Memphis Subs were louder is that true? He's selling me 2 15's Memphis PR's with a Ported Box for $289.. Will these be louder than the L7's? or CompVR

I'm bored at work and been looking around and found shocker audio. It seems they no longer exist. the sub looks bad ass and wanted to know a little more about this. So if you know anything please share.

2x Level 3 12's with an AQ 1200d amp, the box is little more than 4 cubes tuned to 39.5 hz, off some tones i was able to do a 139.9, and then some tuning bumped me up to 140.0 db, sealed with TL on the window. The hard part is its in a 4 dr car which are f*ckn hard to get loud, but we shall see what this setup can do when tuned to 43-44 hz, should have results Thursday with some pictures.

Here are my babies fr the end of the 04 to 05 season. They are a pair of dB Drive Platinum 10's that are dual 2 ohm. Should be well with about 2k of power of each one. They seemed great for the price and build quality looks decent. Having the box made as we speak. Will get to do some tests with a little power on my Linear X this Saturday (my MECA setup) and get some tests done at the Hurricane Relief show on Sunday (hopefully) with the Audio Control 190. Not going to put the Concepts to the subs yet because of my stock electrical system. I will update everyone when I get some numbers. Anyone have any experience with the dB Drive Platinum's?

I want a sub to have loud bass but still sound good.(be heard a block away , hurt to turn it up loud ) Also are there any good pre fab enclosures for sale that are good ( i heard pre fabs suck) ? would you go ported or sealed? and i need an amp to push either the 12 or 15. budget on amp is around 100 new or used.

Hey everbody since my icon doesn't work any more i was looking for a new sub and i was kinda stuck between the xcon 12 or a bl 12 fully loaded and was wondering which would be louder. sq doesnt matter much but its a plus and right now, im leaning towards the xcon because of how much i loved the icon and i was looking for some suggestions.

In the damned school parking lot! Some guys wanted to take a listen at my Magnum 15" so I started up my car and cranked it up for about 10 seconds or so of solid bass to let them see just how clean and loud it would go, and then a few minutes later a cop pulled into the parking lot and got out to have a word with me. He said when he drove by it was playing at an "unreasonably loud level" and that he turned his car around to investigate it. He went back to his damned car and wrote me a ticket for disorderly conduct. I told him that I didnt think there was any reason for me to get a ticket because I always keep it turned WAY down in residential areas and late at night, and …

booth are terrific subs in my opinion. are they in the same class ?do they have a particular application?

I'm doing a bit of work on my front stage in my 03 mazda and need some ideas on what drivers I should uses for pillars. I built door panels that house rockford P1652-S components running off my old Pioneer GM6000f rms 125watts per side. Sound is crazy clean but I want a bit more. So, I've got plans for building some new pillars that will either house some coaxials or components. I've got a new VIBE DEATHBOXS4-V1 that will rms125watts x 4 channels. idealy, I want to run my P1652-S's and whatever i put in the pillars off the VIBE and my rear speakers (cheap coaxials from princess auto) off the Pioneer. SO: For 125 watts rms, what should I use in pillars? coaxials or compone…

how can i get a sticker??

So Im about to change my factory speakers to a 2-way component set. Right now, I will be running passive (HU->crossover from components->woofer/tweeter) but in the future, I plan on adding a Sundown 100.4D Will this be right? HU->Amplifier->Crossover from components->woofer/tweeter) Also, is this considered active? The reason why I ask is because I plan on buying Morel Hybrid Ovation II components, and the dealer Im getting it from told me they put a lot of work in the crossovers. At that price, I wouldn't like to put those crossovers in a box in the closet, but I wont use them if you guys tell me its better not to have them if there is an amplifier already…

Heard a level 4 15 sub today and it was a monster, low end was amazing, clear, and sounded nice, to top it off the sub wasnt even broken in yet just simply dammmmmm... Big props to sky from Hawaii Aloha

Time for a new box! :dancingsmilie:

Need new sub, blew my 18" treo ssx. Anyone do recones for a decent price? Anyone selling an 18 that does 2500-3k? Budget is $300-400 Im open to other options as well. Im workin with about 4cu ft net ported, 5 sealed. Figured the 18 is the best way to go, but if 2x 15's sealed would fit, cool.