Subwoofers / Speakers

I recently got a 2015 Altima 4d, and would like to upgrade the factory speakers. I'm not so much concerned with changing the HU (has b/u camera and steering wheel controls), unless it is absolutely necessary. I'm also not concerned with adding a sub, atleast not yet, but is a possibility in the future. As far as speakers go, I'm looking at going to 6.5's and adding a pair of tweeters. It currently has 4 door speakers, a pair of 6x9's in the deck, and a pair of 3.5's in the dash. My thought is to ditch the 6x9's (or just unhook), replace the 3.5's in the dash with some tweets, and replace the front door speakers (possibly all 4 door speakers). I do plan on running the spea…

I will be building my own box for the subwoofer, however, I would like to know which subwoofer would work best with the amp I have. Infinity Reference 611A 456 watts RMS x 1 at 4 ohms (657 watts RMS x 1 at 2 ohms) Which do you guys think I should go with? I know that a larger box will require the subwoofer to take less power, so, in addition to which subwoofer you think I should go with, what box dimensions should I use? I've heard only good about Mach5 subwoofers, so I want to have my very own

How will a Fi BL 15 Fully Loaded sound on 1100 watts rms @ 2 ohm? I have an alpine type r 15 running on that amp im getting the fi tomorrow Im just curious how it will sound and how much better than the type r thanks Billy

I found a rf 6.5 component set (T162s) on ebay, and im wondering if they will fit in my 1990 Town Car. The stocks were 6x8s. thanks

hey, posting this up for future reference for people that might need the info i have an old 12" claw basket mag and the surround is torn on it. i am wondering: 1- is it possible to get a recone on it? or do you guys only do the new subs 2- if it is possible, is it possible to keep the same look of the old mag? or would it look like the new ones after the recone? 3 -and how much would a recone cost thanks

I wonder if this will show up alright. Who says strokers have no Xmax? LOL. I wonder if that throw is linear?

Hello I'm new here and have been into car audio for a little while. My question may seem dumb and maybe its because I haven't heard enough setups or any bad subs...but I'm wondering how it is you determine what a good sounding sub and install sounds like? Just a little background...I bought an Icon recently and built the box using the design on SSA's website and I think I did a great job for only my second box. The only two real problems were that I accidentally made the cutout for the sub 2 inches to the left in the center and it was supposed to be offset, and the second is that the port is somewhat crooked at the corner and is off by about an 1/8th of an inch. I think i…

what type of amp should i run to these speakers ?

The picture is very high-definition, and of course it's Bluetooth connected.

What are your guys' favorite places to get your speakers online? or what do you have that people should stay away from?

I disconnected my speakers and was listening to my sub by itself and I noticed that I could slightly hear some words. Everything sounds good and you cant hear it when the speakers are connected so I was wondering if this is normal.Thanks in advance for any help.

well i was playing some new tracks and then i opened my trunk and felt weird smell from woofer, it's playing great but there is some kind a smell, like glue is burning or something, and dust cap gets a little bit warm, am i pushing it too far ? I got 15" JBL rated 350W RMS running it @ 4ohms 500W RMS

Alright ... dual Shiva's ... amp = Arc 1500D-R. Right now they're firing upwards in 1.25 cubes per driver. I'm pleased with their performance, but I personally think they can do a bit more. I've tried 1 cube per driver, 1.25/driver, and 1.5/driver all sealed, with and without polyfill. I stuck with the 1.25/driver with polyfill just because that's what sounded the best to me. I've also tried 1.75/driver ported to 24hz. Wasn't too bad. Keep in mind they are firing upwards. It's a Chevy 2500HD ... big truck, four door, custom center console ... woofers in the back half of the truck firing upwards. Bucket seats in the back if you can picture it ... the console divides…

Yep...dont claim to be an artist...never have been... But i can make/fabricate anything i put my hands one ...the concept for a little something to come here in 2 weeks....

Hey, my friend was given a sub that nobody has been able to identify. It's a 15" w/ a standard 4 spoke aluminum basket, triple stacked mags and i believe d2 voice coil config. on the front it is very standard looking with a normal convex dustcap that has a bunch of weird graphics in white and the logo of a company that i know that i have seen before. It looks like a diamond shpe thats half black and half white, with a smaller diamond inside of it that is the same but the color is opposite on each side. gonna try and get some pics up tomorrow. this thing is beefy and we need to come up with a better box for it

Was honestly curious how the xcons line up with the fi q's. I always hear great things about both, was just looking for input on how they compare from someone who knows more than me. Which I imagine is about anyone here. Thanks in advance!

yeah..the box was made by fine custom works, and is 4 ft^3, tuned to 32 hz. i didn't take any excursion porn pictures...im still only running it with a crappy power acoustik 900 watt amp with the gains turned down low, but it still gets so loud and stays so clean. my old subs (don't laugh, audiobahns) sounded like crap compared to this. when i'd turn them loud, i'd hear popping and it sounded terrible. these sound so much better. im surprised at how good the sq is on this 15"...i always heard that 15"s were a little sloppier than 12"s, but they definately are not like that at all.

hmmmmmmmmmmmmm........ maybe this big....... :thud: wheeeeeeeeeeeeeeeeeeeee

i would take the measurements myself... but i dont' have one yet i'm planning on getting a 97-99 thinking bout getting 15s but want to make sure they'll fit plz help

When i was out riding today bumpin, i have my volume 1/4 the way up and my subs stop playing. Last time i had this problem the power wire came out of the amplifier but not this time, all the connections was still in tact and the amp was still on. I thought it was the fuses but if a fuse was blown the amp power light will not be on.....what you guys think? i praying the subs are not blown because the volume wasnt all the way up

Title says pretty much everything. What would produce the best sound given enough power is present. I have heard that more low xmax drivers will produce less distortion, any truth to that?

i just got my 15" audiobahn aw1508t and i dont know to wire it. can someone help me

so when u get a DD sub ....just hook it up and "slap" the shit out of it

So I have pretty much decided that I am going to choose 1 of 2 things.. I have 4 Memphis Mojo 15s right now and I am either going to a) do a third row wall or b) buy two DD9518g's The reason for the third row wall is because I don't have enough space for my batteries and amps with a traditional box right now because my truck isn't that big. What do you guys think? Keep the 4 or sell them off and go with 2 18s?