Subwoofers / Speakers

can some one help im looking to get 2 15s i have a sundown 3000 im looking for sq but at the same time something that can take low notes more toward quality sound and dont wanna pay more then 350 a sub.

I would like to purchase (2) Digital Designs 9512g's. The local dealers here do not carry DD and I cannot find anywhere online to purchase these subs. Would someone please point me in the right direction?

Hey all, I'm new here, was wondering if i could get some friendly advice. Im lookin at getting my first system in a few weeks for my '01 taurus, and i cant decide whether to get the type r 12 or a fi q 15...i know it would be a big difference...but i dont know if the Q would be an overkill and more bass than i want, not to mention take up way more of my trunk ..i can get the Q from a guy on caraudio.com for 240 shipped...or the R for like 130 from sonicelectronix.com, should i spend the extra $110? would probably be giving either around 1000w..any advice/sugestions?

Hi all, I have a 2007 Hyundai Elantra GLS and am looking for some components to compliment finish up my system. I currently have a 1 FI Q 15 (3.5 cubes, tuned @ 33Hz) Sundown SAE-1000D Alpine CDA-9885 Can anyone make any recomendations?

In my introduction thread, i had a few set ups for my dodge intrepid that I had in the past and the present one that I do have. My new project is my suburban ls What I am looking for out of my subs is just something that is really hitting hard and worth my money. my thoughts have been -four 15 in subs -two 18 in subs (fi btl's) the amp i plan on running on any set up will be the 2500d orion i am really interested in the Pioneer Premier TS-W8102SPL. has anyone ever that sub as a set up or know any good information about it? i just need some ideas and some knowledge on what will work best for me.

alright.. so this is probably less complicated than I am making it... so i'll list the gear I plan to use first: Currently using a Kenwood KDC-MP435U with an aux for mp3 players. Wanting to switch to IF needed: Eclipse CD5100 with/without a EQ1000 - Eclipse 6 Band 1/2 DIN Equalizer/Crossover lows - 2 15" Dayton MKIII mids/extended/ midtweet - 8 http://www.parts-express.com/pe/pshowdetl.cfm?&Partnumber=290-212&scqty=6 highs - 4 http://www.parts-express.com/pe/pshowdetl.cfm?&Partnumber=275-035&scqty=4 Sub amp - Proto sundown 1800 @ 1 ohm Mid Amp - Proto sundown 75x4 @ 4 ohm Highs Amp - Eclipse EA1412 15x4 @ 4 ohm here is my problem. I have never done crosso…

I want to go passive over active right now because active seems way more expensive considering that this will be my first component build. But, how do I get good mids and tweets to sound good with the crossovers? JimJ said that these crossovers won't work too well? Amp: Crunch PowerZone 4-Channel Amplifier (PZi175.4). Sub: Dayton RSS265HF-4 10" Reference HF Subwoofer 4 Ohm 350w RMS. Tweets: Morel MDT-12 1-1/8" Neodymium Tweeter 80w Mids: Dayton Classic DC130-8 6" 50w Crossover: Dayton XO2W-3K 2-Way Crossover 3,000 Hz Another question, will this ^ sound better than this: Pioneer Components, TS-C160R

right now i have a decent setup which contains. (2) rockford fosgate 450.4 amps (puts out 225 rms to ea. sub when bridged) click here (2) mtx Jackhammers (400 rms) 6x9 Kenwood Speakers (125 rms) i plan on selling my mtx subs and upgrading to (2) 15 inch subs. i want louder sound. higher lows. and an overall higher spl. correct if im wrong but i believe 15 inch subs are louder then 12 in subs. so heres my question. since CRUTCHFIELD has a BOGO on their subs. i plan on buying ethier the rockford fosgate 15 in sub (200 rms) click here or polk momo 15 in sub. i can buy dual voice coil or single voice coil.(400 rms) click here price is the same so that doesnt matter. just wa…

ok I want to upgrade my system. I'm either going for 2 fi sp4 18" in a big ported box or 8 sundown sa15 in a forth order. I know they're really different systems but what would you choose??? (not planning to compete, just a daily groundpounder) thanks for the advice

OK, well I'm looking to buy a SI Magnum 12, and I have a problem picking an amp. I have Directed 1500D that does around 1100 watts at 1 ohm, but I was looking at the Crossfire VR600D that does 600 watts at 1 ohm. I'm looking at putting the sub in around 1.75 cubes at 30hz. Which amp should I use and why? And any recommendations on the box size and tuning?

I am looking into getting some new subs but I am stumped on what to go with. I want sq over spl. I would need 2 12's that would go in a sealed box. I also would be running from around 1000-1500 watts. My bugget is $500 for both subs. I have looked at the fi q, si mag, re se, rd classic, and infinity perfect. I could get each company new except for the si mags they'd need to be used for my price. If anyone has any suggestions please respond.

Can anyone help me out. I have a 2002 S-10 ext. cab and for my sub amp I have a Infinity 611a which is around 650 watts @2ohm. I want to use 3 RE RE-10D4 but someone suggested 2 SR-12D2. I listen to a lot of rap bass heavy music and I just sold my L7 12 for a CVX 12 then I found RE. The reason for wanting to use those subs is $. I can purchase either setup for $150. Will the 3 10's or 2 12's output match the L7 or CVX ? I need some serious help with this and what type of box, sealed or ported. Thanks

Well I am going to purchase a D2 15" monday and I needed some help on building an enclosure. On the website it says that SI reccomends the box be 4 cu/ft vented to 28 hz. I was reading around on the forums people doing like 2.1 cu/ft boxes ported to 30 hz. Whats the deal with this? I love deep deep bass but also like a bit of SQ in the mix. I will be running the sub off a hifonics bx1500. What do you guys recommend I build? Thanks

subs will be in 2.5 cubes each tuned to 32 hz....i want good lows but also a strong punch on higher notes each sub will be d4 powered by a rockford fosgate t1500-1bd

I'm torn on what to buy. I love SPL and SQ, but I dont want to much of either. I'm afraid I'll get something and want more and more. I need to find a single 12'', maybe two. Has the quality of the RE XXX's gone down? I remember then as beasts, and the dream subs... Ascendant Audio Havocs? Fi Q or BL? Sound Splinter RLp? Help... BTW, is it better to get a 20.1 for this install or a SAZ-1500?

I've currently got a Brand X audio BA18. I believe it's from a build house in the states that makes a Moab is it. I'm from the uk by the way. It's currently in a 4.5cuft box tuned to 30Hz with about 60sqin of port area. Although small it does sound nice. Just wondering what you guys would do with it. I can get some T/S specs up in a bit when home. Thanks karl It's being run off a sundown 3500 @ 1ohm.

hey guys. so I've reached a dilemma. i have been looking around for some door speakers for my 1999 Isuzu amigo. the speakers that are currently installed are a set of random 6.5 components that i had laying around. the doors fit 6 inch speakers but i am having a hard time finding any decent speakers that will fit. any feedback would be very appreciated

Hello everyone, I ma a new member and desperatley need your help. I am trying to find a low frequency speaker of 8" with an extreme high Xmax equal or higher than 60mm. It is for a technical application where its needed to move an huge amount of air. Can anyone help, please?? Thanks

Going to be running either four 18 fi bl or 15 inch. Was looking into crescendo PWX 6.5 and their super tweeter. but also want to know what some other options are out there. WIll be running in a 4 door tahoe 2004 z71, so standard would be four 6.5s in the doors and two tweeters up on the pillar. any advice as to other companies to research would be appreciated.

I'm trying to soak up as much information as I can for my next upgrade. But having difficult making a decision on my new sub setup. Too many different subs to choose from and then do I go ported or sealed. So far all I have ran is sealed Pioneer and Alpine amps/subs. But now I am looking to broaden my horizons and try something new. I took the first step and went with an MB Quart DSC1000.1 amp to power my Alpine SWR-1222D at 1Ohm in a sealed ~1.25ft­­³ enclosure (Scosche prefab. Best thing about it is the spring loaded terminal cup). Been thinking of either going 2 sealed 12's at approx 500w rms each or 1 ported 12 at 750 - 1500w rms. So far I have looked at the followin…

So as most of may know the car that is crashed does not have the speakers or amp....so imma buy these things. for the rear imma go with 6.5 coax's and in the front imma go with components but the hard thing i am finding is which ones i am on a 150 dolllar budget on speakers. I found these 3 way speakers but i dont know if these are better or worse than the regular 2 way ones. If i go to 2 way imma go RE Audio Components not the xxX i have had them before and i liked them. I can get all 4 speakers for 150 and 100 for the XT800.4 amp from RE /US amps i had this setup before but now im just trying to figure out if the 3 ways are better or what? Or maybe you guys have better …

hello SSA forum goers, i have just joined this site and this is my first post so if im doing something wrong just say so.... anyways here is my problem. i have a 1995 ext. cab ford ranger. i have a choice of these subs and i plan on walling them off..... either 1 18" FI BTL fully loaded 1 15" RE audio xxx 2 15" kicker L7's i have all of these subs but i dont know which ones to put in. i like sound quality but still gets loud. i had 1 12" mtx 9500 and loved it but had to give it up. i have a kicker zx1500.1amp and all stock electrical (doing the big 3 in the next week) in walling off which ever setup i decide to get. if i decide to go with the L7's or the xxx (havent co…

what model is this FI? it says "15 BTL D2 PW PC" written on the magnet with a sharpie, im guessing thats from the builder? but i had someone tell me this is not a BTL, i need this cleared up since im selling it, and i dont wanna misrepresent what it is.. thanks

Im going to get a SX, but my dilemma is what to get. I got a little over 2cubes that im wiling to give up on a daily basis. What im looking at is either a ported 12 or a sealed 15. I know most will say the 12 just due to basic output levels, but ive always had a hard time putting a single 12 in anyone of my vechicles, ive always gone with a 15. The only thing that is the saving grace for the 15 is that I DO have this really nice box sitting around at home that I used to have my 15 HC in. And that would work real nice for days I wanna be jut a little louder. Specs that matter Amp- kicker kx700.5...yes im well aware of the power it produces compared to the SX rms Car- Toyo…

Hey guys, first post. I just picked up a 2012 gmc. It needs a system. I want it to out do my four door integra (alpine type s components on Kicker 250.2, DD 1512 in pre fab ported box on 750 watts rms.) I'm thinking two SA 8 v.2, RE XXX6.5 components. I already have the head unit, Sony XAV-63. What do you guys think?