Incriminator Audio

team ia, Can you recommend enclosure size and tuning so my warden 12" will have the flattest response so i can listen to wide varity of music from rap, rnb to techno, trance and house.

Now I have my 3 18's in a ported wall and thinking of trying a bandpass wall. I seen a few guys setup on YouTube with DP 15's in a 4th order and it looks pretty impressive but I know they aren't recommended to be in a sealed box. Thinking of going with just a 2 to 1 ratio and giving the 18's around 6 or 7 cubes sealed and as much as possible ported. Really want a low end monster that moves a lot of air for a daily setup that can play all music. Was told around 2 cubes sealed is about good for 18's just leery of going through this and it not working out. Planned on facing them all forward in a triangle but the loading wall is what confuses me because I don't understand how…

So when will the 187 be back in stock or the new version be released? I'm holding off on buying a Dcon in hopes I can get one of these. Should I hold my breath?

Ok, so I'm new to high end subs like IA and AQ but ive owned a memphis mojo 12 and loved it but it just didnt hit all the notes like i wanted. So for my question, would a IA LI take 1000w rms at 1ohm? i know it says 600w rms but have seen guys use the SA1500 on it. I could run the Dual4 sub at 2 ohm and only run 600w to it but i wanna go to my amps potential which is the 1000w at 1 ohm. Anyone have input on it? the sub is in my price range and ive wanted to try IA for awhile now. thanks.

I have a basic plan for this box and would like some feedback on the port size and box size. Here is what I have so far, inside 17" x 17" x 30" = 5 cubes - .22 for sub and - .78 for the 8" port im thinking the port will be around 22" << does that sound right? should the box be bigger or smaller and is a 8" port the right size ? and what if I did a 6" port with the same box, what would that do? Im looking to get the most spl I can at 32hz on this one. Thanks for your input guys

So after doing some research and all I figured id install some speakers i bought a while back. @ the store Making the adapter mounted and about to put the speaker in. I didnt take a final but i will retake my door apart and take a final I am awaiting the pods to come in so i can install the tweeter in the stock location.I was gonna run this amp since ive had it for a few years http://www.sonicelectronix.com/item_8522_Pioneer-GM-5300T.html#tabs How does it look? I dont wanna kill my new investment. My next mods are to do the big three for both of my stock batteries and then to plan the center console with some help if anyone wants to help me haha..

I have a gmc single cab ruck. I already have a bed cover and am planning on doing a full blow through (cutting out everything under the back glass) and replacing the back glass with lexan. My problem is that I want to run two dp 21's on a 40.1 but I don't think I will have enough room to run the two subs and the port into the cab. So my decision is probably gonna be between 2 21's with the port somewhere in the bed or 2 18's with the port blowing into the cab. Which of these setups would be the loudest for daily spl? If anyone has any ideas on another way to do this I am open to suggestions. Thanx in advance.

Ok I got a box built got my 18" DP in and well here is the issue only songs that sound good on it is Trunk Bang and Counterfeit by young joc both very low songs. Box is 5 cubes tuned to 36hz IA DP 18" on a AB 400.1 at 1 ohm at 4k in a Chevy 2500HD 4 door 2 x 2400's 1 foot from amp 2 batteries up front, 250 amp alt, 2 runs of 1/0 back, 2 1/0 grounds. Nothing else is as loud as those songs I like Little jon use to be loud as crap on my 2 nightshade 12's but my box was tuned to 40hz then. I figured it would be close but it s no where even close to being as "loud". Any ideas? Maybe changing the tuning to be higher maybe taking it back to 40hz?

how much is a freashly reconed dr 21" worth? it has 5 hours of play time on it off of a ed nine.1

Okay guys, I just woke up from the best dream of my life! I imagined that I had two IA DP 21"s walled off in my Dodge Stratus running off of my SAZ 3000D. It was an awesome dream and I want to make it come true, I have the 3000D and am currently working on the electrical system to run it, I just need a few more batteries! Do you guys think it is even possible? I don't care about my back seats really...It's 4:45 AM right now, so I don't expect anyone to reply anytime soon.

I will be flying back to the states from Kuwait in two days and if some one could help me out and show me what I need to do that would be great. I will be in Charlotte, NC area for about 21 days. I would like to start putting my truck together when I get back to Kuwait. I am willing to travel to see as many set ups as I can. Please help thanks for your time charles Right now I have 2 TC Sound 18' Ultra LMS with a 200 amp alternator one red top batt one 1400 kinetik and one IA40.1. I

Anyone ever tried a 4th or 6th order for the 2010 line of Death Penalty 12? I figured for a 4th order do a 1.5 cubes sealed and 4.5 cubes on the ported side would do decent, but looking to see if anyone has ever tried it. I wanted to base it off a 100% spl setup with interchangeable ports to swap tuning to 32-34hz for daily.

Well, I did it, talked to IA earlier about it, and I pulled the trigger, 187 15", going into the Neon to replace an old single 8 ohm Kicker Comp. Review and pics when it shows up. Kef

One week away everyone. Who is excited? Who all is going? Be sure to come by and check out the Incriminator booth. We will have all the new products on display. I promise you will not miss us...best booth in the whole building. We will also have our IA competitors there. Beau Boren will have his Chevy Astro with 4 Warden 18's and 8 40.1s. Neill Barber with his Bronco loaded with 16 Death Row 15s. Matthew Karlovic will be there loaded with 2 80.1s on his 4 15s in his Dodge Challenger. Jason Atkins with 6 Warden 12s. BJ Smith will have 8 Death Penalty 18s and 4 80.1s in his Chevy Astro. We also have our SQ guys Steve Cook, Andy Jones, and Robert Petty. Maybe even a few surp…

Ok guys, give me the details on your 40.1 amps. Let's say someone wanted to build an Extreme 2 car with the goal of being the world's loudest car. I assume they are able to be bridged in pairs, correct? If so, at what impedances have you ran them at under these conditions? What voltage do you recommend? Also, give me alot of technical babble about impedance, voltage, current, heat in coils, control over the coil/cone, etc. How would 8 of the 40.1's compare to something like 4 of the JBL/Crown amps (specifically, with the JBL's driving 4 ohm loads)? How about 8 of the 40.1's compared to 4 Hifonics XXV Sampsons? I'm looking for comparisons of current draw, SPL capab…

1) do I have to connect the 2 inputs like in the diagram, or can I just use one ? 2) I am assuming the 2 speaker outputs are in parallel, so connecting a 2 ohm load to each set will result in a 1 ohm load to the amp .... ??

Well, I bought a DP 12 while SSA was having the Black and Blue sale in december. I've only had it installed and playing for a month and a half though. Well, the other day I noticed that there was a crease all the way around the sub on the inside portion of the surround. I've only had about 1100 rms running to it (it's a 1500 rms amp, but with voltage drop I know it's less). It's not even close to hitting the back of my passenger seat, and I've never put it into overexcursion. I emailed Nick today, so hopefully he'll get back to me either monday or tuesday. I'm a little pissed, because I haven't done anything wrong with this sub, and it's practically brand new, so I don't …

Hi my name is Charlie and I own a shop in Ohio (Audiocraft) . For some reason my computer won't let me e-mail you from your website , and I have not been able to get you guys on the phone but i'm interested in becoming an IA dealer . Whats the best route to take can I just fax you my info ? Thanks in advance for your time Charlie Jockers

Nick will you guys be setting up a booth at indy to showcase your products or just attending the show? just wondering if i'd be lucky enough to see the DP's in person!!! either way i'll see you there.

Received my DR this evening, I think I was his last drop in my neighborhood. LOL So I opened it up and it is one damn good looking driver! Well it came with a users guide, enclosure recommendations, catalog and a IA sticker. Oh yeah and a sweet coozie for my DP(Doctor Pepper). This sub is so nice looking and very clean looking, no over use of glue or scuff marks anywhere. I am very impressed with this driver's build quality. So dropped it in my former Xcon enclosure, it fits great after filing down a little. My enclosure is tuned a little lower than the recommendation for it, but nothing drastic. Well the sound is amazing! So clean and crisp. I really am very happy with h…

wow let me just say that again WOW! this thing is huge! 63 pounds gez! cant wait too hooking this thing up!

Just want to let everyone know the new LI's and DR's are all most finished from the R&D stages. We will be doing some testing and shortly after start production. Expect these 2 new line ups to release right after CES! LI's will be 600 RMS and the DR's will be 1000 RMS. I'm currently working to have the DP 18's available about the same time, with the 21's coming right after. I've even spent this past week working on a new SQ driver code named Firesail. Does SQ and IA go in the same sentence? I know SPL and SQL does......Hmmmm....Bring on the sealed boxes for once! Expect rated power to be in the 800-1000 range. No emails please, no other news at this point! Thanks, Ni…

Has anyone seen the new warden yet? I have asked my dealer for pics and asked in the thread right under this for pics(which got closed right after I asked). I am interested in them, but I don't know anything about them at all.

Hey guys, Anything new going on? Had free minute at lunch and thought I'd see what was cooking at SSA land?

Here is the current happening... Download the Dirt Sheet