Incriminator Audio

Hey IA, I picked up the 187's today that you shipped to Indy, well packed, super clean looking sub. solid as hell. They carry your products, but perhaps have not played with them mutch. They were all over the 187 and said they ordered the Dp21"s , some real cool guys there at Sinister Auto Sports. Bear will be dropping the Cougar off tommorow for me to finish trunk. cant wait to get them in and give it a listen!

do yall think that a 12" Lethal Injection can take 1k rms daily? if not whats the most they can take for daily use?

So is there a new version coming? I loved the one I heard, and I'd like to see whether the new one would be in contention for my install or not.

If you need recones email me [email protected], the demand lately has been crazy and I'm trying to get a handle on it. Thanks, Nick

I have a jl audio 1000/1 1000rms amp will 2 15" incriminator audio flatlyne work with this amp or should I go with something else. I have a McIntosh 400 rms amp and a focal utopia be componet set. I want some subs that will compliment what I already have. Experts please help

I recently acquired a 40.1 for relatively cheap. Here are some pics of it since I've ran into alot of people who haven't seen the inside.

So after doing some research and all I figured id install some speakers i bought a while back. @ the store Making the adapter mounted and about to put the speaker in. I didnt take a final but i will retake my door apart and take a final I am awaiting the pods to come in so i can install the tweeter in the stock location.I was gonna run this amp since ive had it for a few years http://www.sonicelectronix.com/item_8522_Pioneer-GM-5300T.html#tabs How does it look? I dont wanna kill my new investment. My next mods are to do the big three for both of my stock batteries and then to plan the center console with some help if anyone wants to help me haha..

Just curious about what numbers this sub can handle, I know its rated at 600RMS. But I thought I've seen people say they put 1000 into it with no problem, Is this true? If so, what would be a safe number to put into it once it is broken in? I will be using this to power it: http://www.techronics.com/caraudio_9666_Hifonics-BXi1908D-1900-watts-Brutus-BXi-Series-Class-D-Monoblock-Car-Amplifier.html Let me know what you guys think.

I keep getting asked over and over for posters of Kendra from people that didn't make the Spring Break Nationals. So due to the demand, I'm going to start selling them for $10. The poster is basically free, but by the time you deduct paypal fees, box and tape, $4-5 bucks for USPS shipping, and a drive to the post office its more or less $10 bucks. Paypal me [email protected] Thanks, Nick

I presently trying to get rid of two Q's and wanting something that will get loud and sound good doing it. The Q's got low and am also wanting a sub that can impress on the low end. An thinking about either two 12" Death Rows or two 12" Re audio SXs. What do you guys think?

http://youtu.be/hS9fLKiIoCg Heres a shot of my boii toms car that we built...

Okay guys we are back in the house and ready to rock it again. Last week was a rough week to see Jonny go - but now I'm back and focused more than ever. It seems sad to think, but back in 2003ish Jonny machined the first Warden which at the time was a beast even more so than it is now, people have slightly caught up since then - we had to use an overhead crane to lower the top plate down - only to break the chain. May will mark the month that the Warden comes out after years and years of work. I'm ready to bring the pain in the lanes once again.......Gear up, its going to be a hell of a ride!

Just as the title says.......

Hi- I'm getting new subs for my daily driver next summer, most like 2 dp's (not sure which size yet). I am considering either 2 sundown 1500d's or 1 sundown 3000d. I have a 120 amp alt, a D34/78 optima in the front, a bat cap 400 in the back, and the big three done in 0 awg. I want to keep the same alt, how many/what type of batteries would I need? Thanks

Right now i have just a hair over 3 cubes to work with for 3 187 10's.... i have done them in this amount of volume ported and wasnt real happy with low end. has anyone had experience with these sealed?

I'm installing 4x DP in my car and wanted to do a nice sticker for the rear window! Something like this! "Punished by 4 times Death Penalty" But im unsure about the grammar! Is it "by" or "with" or how should you say a sentence like that! Or does anyone else have any cool sentence that i can make!

So I was cruising Ebay for fun and came across this... LINK! Looks like the sub has no gasket, and no holes for mounting? I have no experience with IA products. Can someone explain this for me? I understand that the guy probably lost the gasket, but where the heck are the mounting holes? I'm just curious It's also not a bad price for a shipped 21" Death Penalty if its all legitimate. Don't see used 21's for sale too often! Thought I'd throw it out there for that reason too. Thanks! ~Jake

I just bought a used 21" warden from Mr. Bojangles. He's got 1 left still. I'm going to need help designing a box. I have an 03 trailblazer lt that its going in. I also have a crescendo bc2k that I'm gonna run at 2ohms because the sub is a D1 until I get a xs 3100 then ill drop it down to .5 ohm. I'll have a deka 9a31 up front and the 3100 in the back. I have the big 3 and a stock 150 amp alt. My max dimensions are 44w x 27d x 21h. Warden Series 21 Sealed Not Recommended Ported 7.5 cubes - 10.0 cubes, 90 - 160 Inches of Port, 32-37 Hz Average: 8.5 cubes, 120 inches, 32-37 Hz If someone can draw up a design that would be great. Whatever size box you think is best ill g…

One week away everyone. Who is excited? Who all is going? Be sure to come by and check out the Incriminator booth. We will have all the new products on display. I promise you will not miss us...best booth in the whole building. We will also have our IA competitors there. Beau Boren will have his Chevy Astro with 4 Warden 18's and 8 40.1s. Neill Barber with his Bronco loaded with 16 Death Row 15s. Matthew Karlovic will be there loaded with 2 80.1s on his 4 15s in his Dodge Challenger. Jason Atkins with 6 Warden 12s. BJ Smith will have 8 Death Penalty 18s and 4 80.1s in his Chevy Astro. We also have our SQ guys Steve Cook, Andy Jones, and Robert Petty. Maybe even a few surp…

hello everybody, i just got a 3000gt hatchback and i need a know what would the best setup for a setup sealed box b/c space is limited so i need to know will 2 i12s or the 15 lethal injection sealed sound the best in my car? looking to push 1000-1200 watts with the subs facing the hatch glass.

I did some more last night, but you can see the flex much much better. Also a video of the subs excursion. 2nd one is still processing, but should be done shortly. Enjoy!! Gonna have another box built by BJ, but its more of a surprise if anything, should make my sub sound a little bit louder.

Received my DR this evening, I think I was his last drop in my neighborhood. LOL So I opened it up and it is one damn good looking driver! Well it came with a users guide, enclosure recommendations, catalog and a IA sticker. Oh yeah and a sweet coozie for my DP(Doctor Pepper). This sub is so nice looking and very clean looking, no over use of glue or scuff marks anywhere. I am very impressed with this driver's build quality. So dropped it in my former Xcon enclosure, it fits great after filing down a little. My enclosure is tuned a little lower than the recommendation for it, but nothing drastic. Well the sound is amazing! So clean and crisp. I really am very happy with h…

Since this hasnet been posted here yet. Seen it on their FB page

On the IA6.4, if you leave the crossover selector to "full" does that mean you can set the low pass at a certain frequency, and the high pass at a certain frequency? or do the HPF and LPF adjusters not work when its set to play full range? so example if i wanted a set of mids set to play 100hz to 5000hz, i could put the thing on full, then put the lpf to 100 and the hpf to 5k? (just an example)

I have a basic plan for this box and would like some feedback on the port size and box size. Here is what I have so far, inside 17" x 17" x 30" = 5 cubes - .22 for sub and - .78 for the 8" port im thinking the port will be around 22" << does that sound right? should the box be bigger or smaller and is a 8" port the right size ? and what if I did a 6" port with the same box, what would that do? Im looking to get the most spl I can at 32hz on this one. Thanks for your input guys