Incriminator Audio

Thank You IA!!! I picked up some other stuff this week as well. On with the pics: Its a beaut I have 2 Wardens WOOT Top box is a dc alty 320hp Also, picked up another (total of 5 now) 40.1 a t8004,(not pic) 2 sackett 10's, and a btl 18" motor and basket WOOT WOOT

I have 2 new 21" dp's and I have a 88 s10 blazer, I can't fit them behind the back seat. I bought these going to wall my extened cab truck, but have sold the truck since. So do I go with something else or wall the blazer and lose my back seat in it? If I go with anything else it will be IA. And in the $1200 range so I can maybe trade these. I have roughly 10 cubes and want it as loud as I can get it. Unless I just deside to wall it. And I'm trying to keep from doing that if I can just as loud without doing the wall. So waht do you think? Input on subs? Oh I have two 20.1's for power.

i sold everything and thought i was gettin out of audio, well almost a year later and I start over. I had fi bl 18's, and then aq hdc's. Considered running 4 aq 18s in a wall, but still would like to try the 21's. Would 3 dp 21's do ok off 1 sundown 3500d? Will be walled in a 98 expedition. I had talked to some guys last summer that told me not to run the 21's unless just burping them, said they wouldnt do good for daily. Well, this is just for daily driver, maybe some local comps. What suggestion do you have?

Just curious about what numbers this sub can handle, I know its rated at 600RMS. But I thought I've seen people say they put 1000 into it with no problem, Is this true? If so, what would be a safe number to put into it once it is broken in? I will be using this to power it: http://www.techronics.com/caraudio_9666_Hifonics-BXi1908D-1900-watts-Brutus-BXi-Series-Class-D-Monoblock-Car-Amplifier.html Let me know what you guys think.

Looking to build a box this weekend for a Death Row 18", 6.5 cuft, 90 inches of port area. Going to be a slot port, was wondering if it should be a 3" or 4" tall slot? Worried about wind noise (port noise) and tuning freq changing if the port is too narrow. Any advice? Should it really be bigger than 4" tall slot? Thanks!

So I found the Warden on the ssa store for about a grand and was wondering if they are good subs on music Im getting bored with my btl and decided I wanna put in the 21'' just wanted to know if any people used these just for a daily driver.

How does this look for a box plan. I am looking at going ahead and buying a 21in DP since I have plenty of airspace to work with. I also wanted as much cone area as possible that would be ok powered by my Saz-1500v.2. This would replace the rear seats in my 07 F250 and would be at window line. Goal is to hammer the lows, get loud as piss and sound good doing it. Will this work or should I change anything. Sub / Port will be facing forward. Around 10cu tuned at 30hz

Who all is planning on going? Anyone going that will be running IA that I dont know about yet? If you are a fan of Incriminator Audio then you should come check this show out. IA plans on blowing it out for this show since its basically in our backyard.

any word on when/if its getting released?? im getting my 2 18" MTs reconed soon...then i just need amps...right now i think im gonna run sundown, but IA is a possibility as well, but no 2ch amps to match........

Can a 20.1 operate safely for music "ie bass race or drive by" @.35 ohm on a 16+ volt system?

I recently got a dual 2 ohm 21" Incriminator Audio Death Penalty. I'm using a MmatsD200hc which puts out 1400 rms at 1 ohm. My box is ported and the specs are (minus sub displacement) 7.8 Cubes and tunes to 32hz. My gain was up about 3/4 and it started clicking on and off so i turned it down to 1/2 and it stopped. After that I fried it in about ten minutes. My recone just came in today. Can anyone tell me what went wrong?

Which would you do? 4-21or18" death penalties or 10-12" lethal injections?

does anyone know when the 30.1 is going to be released? it would be the perfect fit for my build but dont want to wait around forever.

just wondering how i can get a new remote gain control and wire for my old style ia 20.1s

I just got a 12" DP (2008) and im going to be giving it around 3500rms from my 5082hx. what kind of box size would handle that power the best and what tuning should i be after?

I just wanted to know if the Lethal Injection 12" would be ok to handle an AQ1200D daily ported?

http://youtu.be/mWop7C8QxA0?hd=1 http://youtu.be/bTiOsOj0Qno?hd=1 http://youtu.be/A1gfK3PxemY?hd=1

I had a li15 awhile ago but I think I clipped it or something but it started smoking and just shat on me. Would I just need a recone for it work again?

Can someone please pm me the TS specs for the warden18 I need them to complete a 4th order build, Thanks

What are we looking at for airspace on the 21's. I am kinda tossed between the DP 18 and 21. It really is gonna come down to space.

My link

both of these look like great subs, both are listed as SQ subs. the biggest difference I can see is power handling. both cost about the same, so that is not a big issue. I will have a memphis audio 1100.1 (1100W x1 @ 1ohm) my guess is that the flatlyne will be a little over worked with that power level. but from a pure SQ aspect, which is better? open to everyones thoughts.

Anyone running their lethal injections sealed? If so how do they perform?

I have been looking into the FI BL with the cooling option for a while now and was wondering which IA sub would compare to it?