Incriminator Audio

im thinkin of buyin a 18 dr. how much can they take daily?

Please note that if you've send an email since Tuesday/Wednesday and haven't got a reply - please bare with is we are having server issues. All email sent until it is fixed will be recieved and replied to as soon as we are back up and running! Thanks, Nick

will someone design me a box for two 187 15's. I want the box to be two seperate chambers 3.5 each after port and sub. tuned to 32hz. I will paypal 10 bucks to anyone who can send me a good design. ask for demensions if ur interested. thanks

I have a vision about building my dream system. A wall with four Dp 21s in my suv. thinkin about it just gives me a Boner.

Hello to everyone. I just ordered a 15" 187 and i am going to pair it with a sundown sae 1200d. was wondering if I could get some suggestions on what size ported box and tuned to what to build. its going in a jeep grand cherokee so space is not too much of an issue. also any opinions on how it will sound are welcome. My goal is to get the best spl while retaining sound quality. thanks

12 187 12's, 2 20.1's, 2 XS power D3400's and 1 D2700.

Posted per Nicks Request Hard to believe that car audio did this to my poor car. heres a couple of the damage, and the repair. underside, under the brace. DO Work SON

I had never heare of IA until I came across these forums. I am very interested in the DP or Warden 21 but I have a few questions. The best sub that I can buy locally is an Orion HCCA 15.2. It looks pretty bad ass but obvioussly has no where near the cone area of the 21". The last system I had was a DD9515 with a Earthquake D3. Will the DP 21" be enough to easily eclipse the DD9515 and/or the Orion? Or do I need to go up to the Warden? Current amp is a Crunch Groundpounder 3000 pro. Although it isnt my focus the orion has 4" exursion. What is the Excursion on the DP 21? I have 9 Cubes available for the box. Purpose is a rediculous daily driver/demo. Also are there options …

i need 2 12s for a sealed box. about 1.3-1.4 per side. how will the LI 12's do in this setup? 500watts a piece for now. im also looking into RE SEs. I have idqv3's now and they dont get loud enough or low enough. but i have to stay sealed the box is behind the rear seat of my crew cab. thanks.

Here is a little install that Nick and I did today for his cousin.....Haven't had it metered, but by ear its in the upper 140's at a pretty low note (box is tuned to 32hz).

I let my wife use my Plymouth voyager to get her meca points for drive by 3.system consist of (1) 3 year old 20.1 on (4) DD 3518 e's @ .7ohms and 3 12 v batts.only 90 amp of fusing.here's the video. http://vids.myspace.com/index.cfm?fuseacti...ideoid=58032763 i'm going to run db4 with the van with 290 amps of fusing. Hey Nick!! i will be getting 4 of the new 20.1's before finals. any guesses to those drive by scores oh yeah this is a street box not a wall. http://vids.myspace.com/index.cfm?fuseacti...ideoid=58032763

I know that they rate the dp at 1500 watts but I was told that they can handle close to 2000 daily (if careful) but could a person run close to 3000 for short periods (15-20 seconds). I understand that's not recommended just wondering if its been done and what the results were.

Why did you guys stop making the 40.1? Also, does anyone have one for sale?

I want to do round ports on this next box but I am running into problems of how many I can fit. My numbers look about like this, 17.4 cu ft after all displacements 3 10" round ports 18 or 18.5 (can't remember exact) which is ported right around 35 hz. My main consern is will 3 10" ports be enogh port? Thanks for the help

Hey all, first post here. I went to a local comp. today and got to meet Nick and Josh. 2 finer people you'll never meet. They put up with my questions, even looked in my trunk for me since I am clueless about boxes, airspace, and all. I have decided on an IA20.1 @ 2 ohms on 2 12" LI's in my 07 stang as soon as funds allow. Thanx again fellers for all the help and I'll be glad to keep my $$$ local with the likes of yall. So if anyone wonders what kind of people run IA let me say from first hand experience they are a great bunch.

hy guys...in your opinion...what do you think,the Warden from specs and motor point of view is in the same spl class woofers with the DDz...so i would like to know for example...can a 18" warden keep up with the DD 9918z in a spl comp???

Any such thing?

a small video of my two 187s that i finally got to get loud after a lot of trial and error. this is a bad video cause i am using a cheap camera and the lows make my cd player skip, I have a TON of sound deadening done to this car but you can still see some flex

Yup, only getting around 700-750rms, box is 2.5 @ 32hz Fisher Customs box. Song is Coffee Shop! Enjoy

hey guys, i am currently in line for the free enclosure deal with audibel customs. i have decided to go with the lethal injection. first question, if i got a AQ1200d and wired the sub at 2ohms, would the 870rms watts be too much for the rated 600watts? i want a daily set up where i can pound for 20-30min without having to worry about toasting my sub. i could wire it to 4ohms for 570watts rms if the 2ohm load is too much for a daily set up. im open for other amps in the same price range ($250). second question.....i am planning on getting a single 12' and putting it in close to maximum specs as far as size goes (anywhere from 2.25 to 2.5). i have been playing around …

Ok, I know IA has been busy so I havent been able to get in contact with them this week. So I was hoping you guys( IA owners) could help out. I am going to rebuild my enclosure this weekend for my two 187 15s. They are running off a AQ 1200d and im getting a comfortable 14.8v to the amp at about half volume. Sense I am running roughly 1200-1400rms I was thinking about making the box 4-5^3ft instead of the recommended 6.0(with only 600rms). and I was going to do anywhere from 60-80" of square port at 36hz so let me know what you think I should do,Thanks.

Hey guys heres my situation as of right now i have a rockford fosgate p5002. Ill be using this for about 2 weeks until i get my SAE-1200d. Doing some research i have come up with this... please tell me if there is a better way. I will buy two of the 12" LI 4 ohm DVC's while i have the p5002 i will wire it like this... and once i buy the SAE-1200d i will wire it like this.... Please if there is something wrong with this setup please let me know.

Going to make my order tomorrow for my sub(s). I want some final opinions before i do this... 1 15" Deathrow or 2 12" Lethal Injections Comparing the two what do you guys think are the pros and cons of each.

Hey guys, im just wondering how the jl 12 w6 goes up against a Deathrow 15 output wise. Im just trying to get an idea how loud a deathrow will get haha. Lets just say they both have the amps that is recommended rms for them.

Nick, Any idea of a projected release date of the 10" LI? THanks