Incriminator Audio

sry videos r so crappy will make mpre this weekend or maybe at some upcoming shows let me kno wat u think

I was wondering how does the old dp look vs the new dp? Idk which one i have thow. Was the older a copper coil or a aluminum?

Because of popular demand for a BIG woofer like the DP 21 and still be in a decent price range, we are going to release the DR 21 - Dual 1 or Dual 2 ohm coils. YAY!

Hey IA, I picked up the 187's today that you shipped to Indy, well packed, super clean looking sub. solid as hell. They carry your products, but perhaps have not played with them mutch. They were all over the 187 and said they ordered the Dp21"s , some real cool guys there at Sinister Auto Sports. Bear will be dropping the Cougar off tommorow for me to finish trunk. cant wait to get them in and give it a listen!

hey guys, i am currently in line for the free enclosure deal with audibel customs. i have decided to go with the lethal injection. first question, if i got a AQ1200d and wired the sub at 2ohms, would the 870rms watts be too much for the rated 600watts? i want a daily set up where i can pound for 20-30min without having to worry about toasting my sub. i could wire it to 4ohms for 570watts rms if the 2ohm load is too much for a daily set up. im open for other amps in the same price range ($250). second question.....i am planning on getting a single 12' and putting it in close to maximum specs as far as size goes (anywhere from 2.25 to 2.5). i have been playing around …

June 19th Newark Del.. Nspl / dbdrag event Nspl will be a 2x point . Dbdrag is a 1x point event ... Then June 27th 2010 Usaudio Glen Burnie M.d Nspl comp 2x point event plus King of the kick bass boxing ... I will post some vid's from the May 16th audio event ..

ok so i bought a 40.1 from a guy on ca.com about a week and a half ago.. today is the first day i actually took the amp out of the box and hooked it up. as soon as i got everything hooked up, i triple checked everything before hooking the power wir(s) to the battery, everything was correct so i turn the key and POP there went the amp...it does that everytime i turn the key, the power light will come on for about a 1/2 sec then it pops and goes into protect. it pops on the end with the rca input's, i have NEVER had this happen to me so i'm curious what might of happend here. Anyone have any ideas? ALso, where is the best place to get this fixed?

hello from Slovenia u guys Yeah, I'm a new member and i know I should used the SEARCH button, but I'm kinda in a hurry... ... so could please someone tell me the correct box enclosure for the DP? i was thinking of about 9.4 cubic feet tuned to about 36Hz. what kind of port area should i make, 150square inches, more, less? and it's going to run on about 2-2.3kw power! thanks for the answers! Lp Kuky

Incriminator Audio, LLC is proud to announce the addition of Powermaster

Hoping to find a 21" basket and cone/surround for a frankensub I am looking to build, I was wondering what you had to bolt to a treo motor with a 4" coil, 6 on 5" bolt pattern, and what it would run me? I really wanted to go 22" but there just arent any parts available right now. Thanks for your time guys! Hope you have a warm and safe Christmas!

I aint found, seen, or heard of anyone running IAs in a Tundra, and i was looking to get loud. And I got a buddy in Street Shakers out of Montgomery that runs IA's and i know how good they sound and how loud they get. So....I went and bought me a 12" DP for the backseat. First, I custom made a box. Its about 2.75 cubes give or take, double walled, 33.75 inches of port, and heavy as all hell. Wish I had a picture of it alone but unfortunately i dont. Next, bought a second JVC Arsenal 1000 watt amp(and i already had one from a previous setup). Stacked them, and wired them all together. This is about halfway done with. https://www.facebook.com/photo.php?fbid=1015045054645915…

Can anyone give me the measurements dimensions for the 40.1? (lxwxh)

We all will be out of the office for CES, if you need any thing while we are gone, please email me [email protected], I will try to return your email as fast as I can. Thanks, Nick

Ive decided to go with an IA Lethal Injection sub for my first setup but cant decide whether to go with the 12" or 15" version. Either one will go into a properly built and designed enclosure and be receiving the same amount of power. I drive a small mid-80's hatchback. My question is what are the differences between the 12" and 15" version of the lethal injection subwoofer besides cone area? Does one hit harder or get louder than the other? What would you guys recommend? I listen to rap, techno, dubstep, rock, and some country.

Hey guys, im just wondering how the jl 12 w6 goes up against a Deathrow 15 output wise. Im just trying to get an idea how loud a deathrow will get haha. Lets just say they both have the amps that is recommended rms for them.

Hey guys today at the show in Murfreesboro Tn. I was given the first phat 21 in Meca history. I hit a 147 flat at 46 htz and a 143.7 at 36 htz. We downsized the box and tuned it lower for more of a daily use. My dad is going to build a new box this week and its going to be bigger and tuned higher. Its going to be geared more towards burps. The score has gone done from the original 149.6 we were hitting at the start of our adventure with this massive sub. We should get hopefully get the magical 150 mark with this new box and some testing. Equipment wise I am running a 21 inch warden in 7.5 cubes tuned at 36 htz and a Sundown Audio saz 3500. I just wanted to thank Nick and …

Any such thing?

Ok, I know IA has been busy so I havent been able to get in contact with them this week. So I was hoping you guys( IA owners) could help out. I am going to rebuild my enclosure this weekend for my two 187 15s. They are running off a AQ 1200d and im getting a comfortable 14.8v to the amp at about half volume. Sense I am running roughly 1200-1400rms I was thinking about making the box 4-5^3ft instead of the recommended 6.0(with only 600rms). and I was going to do anywhere from 60-80" of square port at 36hz so let me know what you think I should do,Thanks.

will someone design me a box for two 187 15's. I want the box to be two seperate chambers 3.5 each after port and sub. tuned to 32hz. I will paypal 10 bucks to anyone who can send me a good design. ask for demensions if ur interested. thanks

I'm installing 4x DP in my car and wanted to do a nice sticker for the rear window! Something like this! "Punished by 4 times Death Penalty" But im unsure about the grammar! Is it "by" or "with" or how should you say a sentence like that! Or does anyone else have any cool sentence that i can make!

I did some more last night, but you can see the flex much much better. Also a video of the subs excursion. 2nd one is still processing, but should be done shortly. Enjoy!! Gonna have another box built by BJ, but its more of a surprise if anything, should make my sub sound a little bit louder.

We will be closed Monday and Tuesday - Will reopen on Wednesday. Please be patient until we can get back in and return calls and emails. Thanks, Nick

Vote for me for the system of the month over at *****.com my user name is dvldogyut. The only IA build running for it! Gotta put IA on the top!

Yup, only getting around 700-750rms, box is 2.5 @ 32hz Fisher Customs box. Song is Coffee Shop! Enjoy

Hey guys heres my situation as of right now i have a rockford fosgate p5002. Ill be using this for about 2 weeks until i get my SAE-1200d. Doing some research i have come up with this... please tell me if there is a better way. I will buy two of the 12" LI 4 ohm DVC's while i have the p5002 i will wire it like this... and once i buy the SAE-1200d i will wire it like this.... Please if there is something wrong with this setup please let me know.