Incriminator Audio

Since we offered the old SBN poster for sale, I figured why not put the new one up as well......$10 shipped, paypal [email protected] and be sure to reference which poster you are ordering. Thanks!!

Since this hasnet been posted here yet. Seen it on their FB page

Discuss ....

Will start shipping Aug 5. You can pre-order starting tomorrow

Alright guyz I'm looking to buy a 21in death penalty before the sale ends, is 2000rms ok for daily and 4000rms for burps? It will be in 8.5 ft3 after displacement with 3 8 inch aeros for 151 inches of port area tuned at 30hz. Will this be ok? Or should I try something diff?

It'll be going in a Ford Bronco next week.

I have a gmc single cab ruck. I already have a bed cover and am planning on doing a full blow through (cutting out everything under the back glass) and replacing the back glass with lexan. My problem is that I want to run two dp 21's on a 40.1 but I don't think I will have enough room to run the two subs and the port into the cab. So my decision is probably gonna be between 2 21's with the port somewhere in the bed or 2 18's with the port blowing into the cab. Which of these setups would be the loudest for daily spl? If anyone has any ideas on another way to do this I am open to suggestions. Thanx in advance.

I was wondering if I could upgrade my motors on my dp's to the new neos when I get them re-coned? Also, I have two older model wardens I would also like to upgrade as well. Is this possible?

I need to know how many cubic feet for two 21'' warden? these will be driven by two memphis mojo 4k and is for everyday use and demos ,and how many square inch in the port for both tuned at 34hz ,the box put in my Ford Expedition 2000 thanks

I recently purchased a 21" Warden and a Saz 3500. The vehicle it will be going in is a 97 Blazer. The box my dad drew up last night was 8.5 cubes after port displacement. With 120 sqaure inches of port. It will be ran at two ohms for daily and .5 for when I am at a show. I compete in meca. My dad is going to build my box. I am posting this here because I would like your honest opinions good or bad criticism and if you would like to help that's great we will try anything. I currently have the amp and I will be picking the sub up saturday.

I'm having some problems deciding on my next sub stage. I currently have an 05 RE XXX15 and an extra motor that will be rebuilt soon to match. I was gonna do these in 8cuft@30hz w/100sqin of port, in the trunk of my car on 3k, in a sub up/port side configuration. I just got offered a pretty decent deal on a 21" Warden, and it's got me thinking. Could the Warden be as loud on the same power? I'm running either option in same enclosure, but the Warden would have a bit higher tuning (33-36hz). Are these even musical? I know they will play music and will be no match for the 05 XXX's in sq, but will they sound decent doing it?

So I found the Warden on the ssa store for about a grand and was wondering if they are good subs on music Im getting bored with my btl and decided I wanna put in the 21'' just wanted to know if any people used these just for a daily driver.

Can somebody pm me or post the price of the 21 inch warden re-cone.

Hello

HI IA, Before I start I just want to thank Scottie Johnson ,Nick ,and the People at IA for all there support 10/10 customer service 10/10 audio equipment guys! Respect to you all!!!! will its time for an upgrade from my old system to a new one! here is whats going into the new system:- - 2X IA 40.1 Amps. - 3X IA DP 15 D2 with triple magnets. - 3X PowerMaster alts. - 4X 16v PowerMaster batteries ,or 4X BOSCH Silvertech batteries. - 5X 200A fuses. - Pioneer AVIC-Z2 HDD HU. - Pioneer ND-BC20PA rear camera with a Visual DSP unit made. - Pioneer ND-BT1 Bluetooth adapter. - Pioneer CD-IB100II iPod adapter. - Pioneer GEX-P10XMT XM with NavTraffic. - Pioneer XDV-P6 6-DVD in-dash …

Hi all. My name is Marcos Barnes and I`m the owner of. www.globalstreetbassers.com and www.streetbassers.co.uk NOTE: GLOBAL is Under Construction Some of you may already know me becuse of the Monsterous Purple Escort that does over 150.0dB @ 20Hz and 155.3dB @ 30Hz Anyway. I`ve had these 187 10" subs since they were released. Somebody has just purchased these and I`m building the box for them. It`s not finished as it need filling and spraying etc. Here`s the SPL results using the ((((Propper Droppers)))) SPL format. The following text has been taken from my forum: Link: or look below: http://streetbassers.co.uk/forum/index.php?topic=2248.0 -----------------------------…

Whats going on every body let me start out by saying this is my first post on hear so imma make it short and sweet i have 3 new motor dp 21's on 3 sundown 2500saz in a none wall setup lets get to the pics http://www.youtube.com/watch?v=JUV90LpnB...

i sold everything and thought i was gettin out of audio, well almost a year later and I start over. I had fi bl 18's, and then aq hdc's. Considered running 4 aq 18s in a wall, but still would like to try the 21's. Would 3 dp 21's do ok off 1 sundown 3500d? Will be walled in a 98 expedition. I had talked to some guys last summer that told me not to run the 21's unless just burping them, said they wouldnt do good for daily. Well, this is just for daily driver, maybe some local comps. What suggestion do you have?

I am getting ready to do a build for a someone, using 3 LI 12s sealed running off a 20.1. Here is my question for you guys which way do you guys think I should fire the subs. They are going in a chrysler 300. The back seat folds down and my first mind was to fire them forward and build a pan and seal it off from the trunk. So let me here your opinions.

seen the 30.1 @ sbn and was surprised at how slender it was. looked awesome. estimated release date?

i will be picking up a sundown 3k or rockford t2500-1 bd. i was wondering if that will be to much for the death rows? or should i go with dp's ??

this was a test at mid volume on 2 stetsom 14k2d's

hello. i am pioneerpimp and known pretty well on caraudio.com. well my build log is as in the title. thought id get the forum some more traffic, and love to show you guys my work on to the pics. just blackened the windows to keep people from looking in. a cheap way of tinting i guess.

http://youtu.be/hS9fLKiIoCg Heres a shot of my boii toms car that we built...

ok so im i finally have the amps and the alt and a few batteries so its time to start the build,my only problem is i have limited port area, i wanted to do 9 cubic foot per sub(36ft3 after sub and port displacement) with port at 16sqin per cube which comes out to 576in2 port, upon measuring i found that my maximum port area can only be 477in2 which is almost 15in2 per cube at 8ft3 per sub(32ft3 in total before the displacement. so really what im wondering is would i be better off to just do subs up and port backwith virtually all the room i need or go ahead with a slightly smaller wall than what i wanted, oh im tuning it to 32hz so if that helps either position better tha…