Incriminator Audio

My original plan of running 2 Crescendo BC3500d amps to my 2 Death Penalty 18s fell through. Now I am in need of an amp. What is everyone pushing to there Death Penaltys? I was wanting a strong amp that can do .5 or 2 ohm for burps and 4 ohm daily. The reason my idea of the 2 fell through is because it was turning into a huge hassle to run 2 for burps and unhook 1 to run the single 1 daily. I seen wiring nightmare written all over it.

hi I wud like to buy a 15" IA Flatlyne for daily sq use but i notice there isnt any IA Recommended Enclosure Sizing for it on their website or on here - can nick or anybody at IA or here give a recommendation for a very flat sealed response ? i need to know before i order it space & amount of amp power is not an issue , those will be dealt with accordingly afterwards thanks guys

has anyone bench tested on of these I have heard on other boards that they compair in output power to a DD Z1 even though they are rated @ 3600 is this true? thanks

Hers is the blazer and a few things I have done to it for those of you who haven't seen it.

hello everybody, i just got a 3000gt hatchback and i need a know what would the best setup for a setup sealed box b/c space is limited so i need to know will 2 i12s or the 15 lethal injection sealed sound the best in my car? looking to push 1000-1200 watts with the subs facing the hatch glass.

So since the warden is the big name of incriminator I have a few questions. I have a 12 inch warden and am aiming for some good numbers in my 4 door pontiac grand prix, hence the reason for an aero port. Does anyone have any ideas on what I should do. I have a 6 inch aero port and was wondering what size someone would recomend for the box. The second question I have is should if be internal or extrenal aero port. Any help would be nice. Thanks

So results are in. Setup is a Death Row 15 dual 1, Rockford Fosgate Power BD500.1, 3.0 net tuned to 30 hz, in a 2000 Dodge Neon ES with ZERO electrical upgrades. Also keep this in mind, the a/c was blowing full blast the whole time, so that probably robbed me of some power. Also, all scores were at 42hz except the port score which was 35hz. First pic is headrest with rear seats up. Second is headrest with seat folded down. I didn't get a pic of the dash score, thankfully Will recorded the scores for my build thread on MW, I did a 138.4. Third pic is in the kick. Fourth is the port score. Will couldn't get the sensor past the bend, which he said hampered the score. …

I just have a few questions about my incriminator Death Row its a 12' 2000 watt speaker im building a truck box to put behind the seat of my Chevy s10 extended cab 1. Do they make a speaker cover that would fit over the Incriminator 2. Any tips you could give me on the box build or the displacement 3. What would be the best way to clean them 4. Do you think a Audio Bahn 1600 watt amp will be able to push the 2000 watt death row to a decent potential 5. Any other tips or precautions you can give me to make it the best possible

I have the newer re xxx that needs a recone and was wondering if I could get it reconed to a 18" or 21" ia death penalty? I'd hate to pay re that much for a recone for only a 12..... if it was a 15 or 18, i would have already done it. thanks for any replies

I still dont remember if it has a single 1/0 input or a double....whats the length of it? Thanks -Robin

I have 27 left in XL only asking $20 shipped in the 48 states..... Paypal away [email protected]!

My buddy in the service is coming home from Japan and we want to know if he can recone his IA DP to work with his new amp. He has the new IA DP bought on the black Friday sale of last year. Does IA provide recons? Or do we need to go through a dealer?

Hello, Would like to say S.Deyoung is a great guy and process of ordering from him was very easy and would recommend to anybody. I order the speakers from him and received them in a very short manner along with some adapters from Car-Speaker-Adapters. Okay, backround information, I drive this And I work here, And this is how much it cost to fill up from E, Lol okay, onward with the install. I will start off by showing step by step pics of the door panel removal procedure and then will post a thorough procedure on ExplorerForum. Okay, again, sorry if I'm taking up too much space, but I hopefully somebody could benefit from seeing the process I took as th…

The 18 DR is still pounding the shit out of my truck. I am digging this sub ALLLLOT!

MECA drive-by 4, Mic is 6 feet from truck 30 sec avg on music. 3 15" wardens on 2 D9's Box blows apart at 10 secs (watch all the dust lol.) http://www.youtube.com/watch?v=wu5DhHkhro8 http://www.youtube.com/watch?v=YVr7A7wrzjo&feature=related

I just bought a used 21" warden from Mr. Bojangles. He's got 1 left still. I'm going to need help designing a box. I have an 03 trailblazer lt that its going in. I also have a crescendo bc2k that I'm gonna run at 2ohms because the sub is a D1 until I get a xs 3100 then ill drop it down to .5 ohm. I'll have a deka 9a31 up front and the 3100 in the back. I have the big 3 and a stock 150 amp alt. My max dimensions are 44w x 27d x 21h. Warden Series 21 Sealed Not Recommended Ported 7.5 cubes - 10.0 cubes, 90 - 160 Inches of Port, 32-37 Hz Average: 8.5 cubes, 120 inches, 32-37 Hz If someone can draw up a design that would be great. Whatever size box you think is best ill g…

LI dual 4 it'll be going in this.

Hey y'all, I received my DP 21 yesterday!!! Wow!!!!!! Is all I can say, but there is a little problem. The motor top plate and bottom plate is chrome. I thought it was supposed to be black nickel. And I have chips of 3 of the magnets. Is that ok? I hope it won't effect anything. Just let me know! Thanks

I haven't seen much about the new ones. I'm really liking them but I'm wanting to see what's inside. So if that's possible could somebody post a few pictures. Also, what's the MSRP on them?

AS some of you may know, I won the IA dream system giveaway. Well this is the first set of items I have received. Coordinating back and forth with Nick from IA(awesome guy to deal with.) This is like a dream come true for me. I was stupid happy when I found out I won, I'm even more happy now! It's really setting in how awesome this really is. I really want to thank everyone who voted for me or even participated! Most of all thank you too Incriminator Audio, XS power and Mech Man for putting this on. I really can't wait to kick this build off full tilt. 3 2013 18" wardens yummy !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 Pics of the beastly batts (I have one i…

be on the look out for some test results to follow!

Yesterday ,I won DB4 at Meca world finals with a 127.9 db using 4 18's no wall and only 2 old school IA 20.1's on 12 v system.

So now that pretty much everything is available in the SSA store and pictures are up, what do you guys think of the new stuff? What else would you like to see IA offer in the future?

i dont really have any knowledge about the death penalty. I see the warden is the flagship spl woofer, but what would the death penalty be comparable to as far as spl goes? it is an spl woofer right? EDIT: if you guys could, list some subs that this is similar too

I have a 2007 Ram QC and the box going under the seat is .5ft^3 and I have 300 watts at 2ohms. So that all being said is this the right sub woofer? I know personal taste blah blah blah but I just want to know spec wise.