Videos

Simple as the title says. Watch in 720p

Well i have been at this project for a while but i finally have my Fi BL12 installed im my 87 Suzuki Samurai with an audiopipe ap1500.1d amp, 2awg welding cable and a pioneer head unit. still finishing up setting the gain on the amp but here is a little vid of some well known Bass, I Love you. . .

Watch in 720P for the optimal viewing experience.

Got a couple of vids up of my truck. I learned I'm not very good at this (taking vids and talking into the recorder) Please check them out and let me know what you guys think. Thanks, Randal ...

This 4th order bandpass will be going in the bed of a 2008 single cab Chevy. Inside will be two of the new model Orion HCCA 15's. Each sealed chamber is 2.25ft^3 with a common 10ft^3 ported chamber tuned to 46hz. As you can see, there is a removable panel at the top of the box to access the subs, and the port is removable as well so that tunings and port size can be altered to custom tune the box.

I'm still playing around with this new video setup with the intro and such...trying to use some sped up video to catch more of the designing without making the video overly long and boring. Triple 18" DC Audio XL's Vehicle: 1995 Jeep Grand Cherokee Chamber Volume: 16.5ft^3 Port Area: 225in^2 Tuning: 34hz Dimensions: 42" wide x 24" tall x 48" deep

comfortably numb pink floyd sean paul U Aint know slowed I put on

http://www.youtube.com/watch?v=NjPs06luXWQ&feature=plcp&context=C38fe99bUDOEgsToPDskIcrnD9AL6Ix-Oj9uij41JG http://www.youtube.com/watch?v=f7q1vF8ITy0&feature=plcp&context=C3f9d423UDOEgsToPDskJd1zdCTsZqB69RxH-nMJbN http://www.youtube.com/watch?v=Gd7AJWphKlg&feature=plcp&context=C3fb0376UDOEgsToPDskJBaWq90D8TRqNa58Oqjcba http://www.youtube.com/watch?v=cIY4t1f4cg0&feature=plcp&context=C3f0a6cbUDOEgsToPDskJqJ6_YHyg_qtyLJ6PMzqZC

Watch the ceiling fan blades spin That was at 1/2 excursion

yes I made that fake vid for a certain reason at the time I did it but it really has come down and now it is PL PRO'ed in there and the ceiling brace has reduced the bounce by over 50%. another good 6.6Hz sine wave video if you like that sorta thing. it sure doesnt top turtles mating though! a hundred and twenty three thousand? er uh 1,023 oops Happy New Years Eve!

Finally got both 18"s installed in the PT now. Running off a single Digital Designs M3a @.5ohm. Barely tickling them. They get SOOO low, and sound amazing on everything. Plays every note so well. I am very happy, even with this low power. 14^3 box, 270^2 of port, 40Hz tune. 152.2db @39Hz

People keep telling me to tune lower, "can you drop it down to 5Hz?" I AM! My initial guestimation was off! So here is a port trick at 5.24Hz. when I said "when my amps shut off they make a loud noise" I meant when the breaker trips the subs pop from the amps getting their power cut. LTD, run a spectral, bet 5Hz doesnt show up! Bet 1Hz and 2Hz didnt show up in the other vid either! Does that mean with a 5.24Hz sine wave I'm not getting 5.24Hz output? Or the camera can't capture it?

Here's a quick vid of a complete design process...sped it up a little to save some time. This is a very simple one, just trying it out for the first time. I may do something like this for a more complex design so you can see all the little things that are done to achieve a desired look.

Wired directly to a JVC radio's speaker outputs. http://www.youtube.com/watch?v=N8pkWD4_ieI&feature=youtu.be

i did have a 12'' fi btln2 but i got rear ended and tore my car and sub up....but this is my jl 13'' w6 in a new box on 500 watts...but my new 15'' btl n2 is gonna be here on wed i cant wait

Thoughts? Suggestions? Ideas?

http://www.youtube.com/watch?v=jXJ5EuA_Tzw

enjoy!