Videos

Figured i would post up a little video since i got out of class early. Tell me what y'all think. And this is only off about 1000 watts. And watch in 720hd.

Matt's Mustang is ALIVE! http://www.youtube.com/watch?v=lwQDOanUTek

This design is for Mr. Landon Bridges and his DD 9512 woofer. He had limited space to work with in his new Camaro, but wanted a good "daily" box as well as a good "burp" box that he could use for competition. Solution? Make a box with swappable slot ports, of course! Volume: 2.25ft^3 for daily, 2.4ft^3 for spl Tuning: 32hz and 45hz Dimensions: 30" wide x 13" tall x 28" deep

rattle on low successful 4 18'd 1000 cubic feet 5Hz tune 5000 RMS.

lost trapped in a maze therefore I am amazin.AVI

This is a box for a single Sundown Audio SA-8 woofer. Since the chamber is so small, the port needs to be considerably longer than normal to maintain a low tuning while still providing adequate port area. As you can see, some dead space had to be used to drop the volume a little. Volume: .55ft^3 Tuning: 33hz Dimensions: 30" wide x 10" tall x 11" deep

shot a quick video of what i did today. made a new face for the box (3.5cf ported) amd threw the sub in and hooked it up to a oldschool kicker zr240 (500watts) enjoy!

Yet another design for Mr. Jonatan Cortes. This box will be going in the back of his Toyota 4Runner. Six(yes six) 18" DC Level 4's will be used in this setup...inverted. The box is double layered all around, and 2x4 bracing will be used on the outside of the box as well. Volume: 7.25ft^3 per sealed chamber, 21.25ft^3 ported chamber Tuning: 46hz Dimensions: odd

This is a truck box for Justin Ellis. The box will be housing four JL Audio 6" W0 subs, first time working with these. Volume: 1.3ft^3 Tuning: 34hz Dimensions: 38" wide x 23" tall x 7" bottom and 4" top depth

My teammate Socal Spl John giving a demo at a show a couple of weeks ago. This mustang is loud!!!! 3 TC15s walled FTW!!

This box is for a fellow Dodge truck owner. This enclosure will be housing a pair of T3 Audio TSS 15" woofers, utilizing a kerfed port opening. The subs will be firing forward behind the driver seat, with the port firing up on the passenger side. Volume: 8.5ft^3 Tuning: 33hz Dimensions: 64" wide x 20" tall x 20" deep

Was bored and pulled over to snap a vid with my phone. This is a Distured bass edit song I did. The Q is run on a SA1500 in 3.65cu tuned at 29hz. Phone picks up the flex kinda weird but you get the idea. yes this is my work truck

vid speaks for itself ( OK, there are maybe 100 theaters in the world that can )

7Hz for 7minutes over 100dB 1000 cubic feet, 20"x18"x22" port for a 5.24Hz tuning (4) Fi IB3 18's (2) Behringer EP4000s 1 very old house with the nastiest wiring you ever saw run off an antique 15A fuse box that can't properly and fully support 1 EP4000 let alone 2 plus the rest of this 1/2 of the household.

http://www.youtube.com/watch?v=5VvX6v2IQg8&feature=channel_video_title this is what we do to make it through the day.

sorry for the quality its my cell phone. Also its a modded slowed song not a test tone. Please enjoy!

Team LLA 1979 Buick Electra install all Rockford Fosgate system. 4x6 in the dash 6x9 in the rear deck on a RF mini amp PBR300x4. and 1 RF P2 10 on a RF mini amp PBR300x1. Built a center console to house the Clarion flipout and built I 1 cude box tuned to 35hz for the 10. http://www.youtube.com/watch?v=nuTd2ibTXic

This design will by built by Dustin Legrady at DL Designz. It will be housing four Sundown Audio SA-8, utilizing an interchangeable slot port setup for different tunings.