Videos

4x AQ 18" HDC's in a 4th order BP with adjustable port. Each sub is seeing 2.75ft^3 sealed and 5ft^3 ported. The port is removable and can easily be rebuilt for other tunings and port sizes if desired. This would make it easy to have a higher spl tuning for burps and a smaller, lower tuned port for some ferocious low-end output. The box is picture with a 46hz port.

Fair warning, watch on low volume, shitty phone camera lol.

This is a vid when I and Audiogod9000 meet up with J P in Arkansas getting his carputer installed. Part two coming soon! http://www.youtube.com/watch?v=Wvpwpk57WDI

Finally got it all tuned out and subs broke in.

Squeezed some 8w4p's in my 03' Protege front doors. Way louder than the 6w4p's they replaced.

Built box behind seat for 2 Kicker CVX 10's and ran 4 gauge to hook it up to a Boss 1600 http://www.youtube.com/watch?v=5u4iSvRP4iE

This one is for Greg Lucas on the SMD forums. Subs angled forward and port firing up in his 4-door Dodge truck. The box will go from his instrument cluster to the front of the rear seats, replacing the center console area...at least until he decides to to a blow-through box. Final specs are 4.2ft^3 with a 33hz tuning.

7Hz for 7minutes over 100dB 1000 cubic feet, 20"x18"x22" port for a 5.24Hz tuning (4) Fi IB3 18's (2) Behringer EP4000s 1 very old house with the nastiest wiring you ever saw run off an antique 15A fuse box that can't properly and fully support 1 EP4000 let alone 2 plus the rest of this 1/2 of the household.

Happy Halloween Everyone! Subscribe, comment, like, and please share with others! Enjoy, and post any vid's you might have found on the tube. Anyone have anything?

FOH, sorry but this has my Blair Witch, Paranormal, Cloverfield signature...Im gonna make you sick with motion. Scott, I didn't break the meter, I kept it below 129dB NO I did not sing at all, at the end I imitate Fred Durst after I turn it way down, it sounds like someone is there singing...isn't that the idea? This was the song I chose over a year and 1/2 ago to do my before/after. After, RS set to 120dB hitting +2dB: Before:

Obviously alot more work left in this, sealing the cabin for starters But just a small vid of the flex, its currently 150 @32hz driver window open sensor on dash, alot more left in this

I have one EP4000 on 2 18's in 10 cubic feet 12" port tuned to 35Hz and 2 more 18's in separate 128 cubic foot boxes with 12" ports tuned to 13.5Hz The 2 in 10 cubes are so much louder, but the 2 in 128 each sound so much better!

This is a box for Erik Jenkins of Jenkins Motorsports for a pair of Digital Designs 9518's going in the back seat area of a Chevy SS truck. The box is 12ft^3 with a 34hz tuning. The subs will actually be firing forward with the ports firing up. Hopefully he's happy with the results and comes back for more work.

This is a dual 12" box design for Joe Hanna. This will be going in the cargo area of a Chevy Trailblazer. The final box specs are 2ft^3 in each chamber with a 32hz tuning. Overall dimensions are 46" wide x 15" tall x 19" deep with a 12.75"x4.5" port.

Getting close to that time again folks.....build starts next week! 3rd row wall.....16 cubes....30hz tuning....and roughly 5K of power......gonna be fun!Doing this build for DSBP,Team Tex Flex,and Team HZ Addiction.....here's a vid....

took a short vid of the dd movin some air, its in a 2.5cuft box with 40inches of port at 35hz.

Video with story coming up....