Leaderboard

If you really like the JL, and it is in good shape and a good price, it is enough power. Set the gains correctly so you are not clipping and it should be a happy pairing. 1000 watts, being double the power, will have a noticeable difference, but that is up to you if you feel you need it.

This is a shot of the edge grind and the concave back of the blade on the deba. The hollowed out, or concave back side of the blade helps to make sure food doesn't stick to it when cutting. I think most single grind japanese knives have that feature.

This shot shows the thickness of the spines. It's the same knives just in reverse order.

left to right it's stamped wusthof(sucks), forged wusthof next to that(nice but I'm now spoiled), Yanagiba (amazing slicer, I thought it would be too long and now I want a longer one), Deba (half hatchet half razor blade).

Here are the knifes BTW. I forgot I took some picks.

Standard Sound Package Plus Standard on PCM is a Sound Package Plus, which includes nine speakers with three times the usual transmission area and with an external analog amplifier for outstanding sound in all driving conditions. The system includes two .75-inch (19-mm) tweeters and one 2.5-inch (70-mm) mid-range speaker in the instrument panel, two 4-inch (100-mm) mid-range speakers and two 8-inch (200-mm) woofers in the doors and two 4-inch (100-mm) wide-band speakers in the rear section of the passenger compartment. The external analog amplifier is located in the luggage compartment and supplies the woofers in the doors and the mid-range speakers in the instrument panel. A six-disc CD changer is available as an option. Optional Bose® Surround Sound System Also available is a Bose Surround Sound System with 13 speakers and a seven-channel digital amplifier integrated into the digital MOST bus to ensure outstanding sound quality. The heart of the Bose Surround Sound System is a digital amplifier with a 5 x 25 watt output and additional support from integrated and external 100-watt switching terminals. Active electronic equalization adjusts the reproduction of sound to specific acoustic conditions so all passengers enjoy a sound experience. The system includes Bose's AudioPilot technology that automatically adjusts frequency levels to compensate for wind, road and traffic noise inside the vehicle. A special microphone in the steering column cover picks up such noises. Speakers used in the Bose Surround Sound System are Neodym units that are more compact, lighter and have better performance than conventional speakers. A Neodym iron boron magnet generates a magnetic field 10 times more powerful than a conventional speaker magnet. The Bose Surround Sound speakers include two 1-inch (25-mm) tweeters and one 2.5-inch (70-mm) mid-range speaker in the instrument panel, two 3-inch (80-mm) mid-range speakers and two 8-inch (200-mm) woofers in the doors, two 1-inch (25-mm) tweeters and two 3-inch (80-mm) mid-range speakers in the rear of the passenger compartment and one active subwoofer with two 5.25-inch (130-mm) woofers in the rear parcel shelf. http://www.netcarshow.com/porsche/2006-911_carrera_s_cabriolet/

http://www.metraonline.com/fit.aspx That'll help you out a lot

With or without Bose? Upgraded audio at all? From this website CLICK ME! it appears as if there is a standard, upgraded, and Bose stereo option. Edit for adding more usefull information Edit again for the WRONG link. not my day

100hz, look at the first page after the contents page when you open the book and it tells you there. I didnt even know it was fixed, Im glad you pointed that out and I been using mine for a while now on HPF.

BIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIG magnetizer 700 volts 12,000 amps of current. It will make you see Jesus.

We have Classifieds and rules for selling and trading. Please abide by these. Thanks!

Bored tonight so I took some pics of the new 35w 3000k fog lights I put in this week. I have 55w 5000k in high and low beams. Highs and lows both stay on when the highs are on. They are bright as shit with the four on at the same time. High beams. Also, I put a blue 5mm LED light in each of the 6 overhead air vents. They are on a different switch than the LED's in the box. Still no cable to upload the vids I took so I am going to take a couple tomorrow with my camera. Not as nice as my buddy's digi-cam, but yall cant see them if I cant upload them.

How'd you remove the rear seats when you were doing your sound deadening? Was it difficult? I have a 2-door Blazer also and am about to start doing my floor, and any advice would be greatly appreciated

this post is very important for daily system This is a lil formula that i use to first get the batteries for the amplifier If you are buying an amplifier like the 5k2e lets say you are going to try to keep your voltage around 13.5 volts to try make over 5000rms lil crazy formula, too make 5000rm at 13.5 volts 5000/13.5 = 370 you will need more than 370 amps continuous on your system i would rounded up and use 4 battery that each of them give you around 100ah + and a alternator to keep up the voltage and charger them !!! ( charger battery you never should have more than 2.4 to 2.5 volts on each cell, its around 14.4 volts ) high voltage can damage your batteries. lose performance on the current ( the most important ) so you can make clean power for your subs for nice time playing not a 30 secs demo You also need to that every SUB needs a 3db headroom to handle varies peak of tone which is very common on music, this 3db is twice much of power, im not telling you to put over twice much power on the subwoofer but to have a amplifier that gives twices much more power that you subs needs This will eliminate part of the power compression, when the subs voice coils rise with temperature leading to reducing the efficiency on the sub to 2db The lowest impedance wont help you to make more power (clean) like 0.5 0.35 this only will kill your batteries faster, this EITHER IS THE RIGHT WAY to fight your impedance rise To fight impedance rise, is not voltage is current !!! amps because the amplifier will need more power to produce more specially on low tones Amplifiers are equipments made to amplify the power you have (battery or power supply) to the subs If you dont have power (battery ) the amplifier will not make miracles, you cant go against physics if you this 3db room of power on your system even when you play low tone the amplifier and your electrical system will have power to them because explain better when you sub hits at 40hz the power consumption is bigger than 60hz, with this vary tones on the music, you neither need a unlimited power source (like a power supply) to give you power for the whole song because the batteries are limited source of power, after you subs hits 10 times at 40hz your batteries wont have the same performance and need your alternator are gonna keep up because the power consumption is bigger to make continuous power then with a setup with a 3db headroom on power, you subs will be hitting hard all day long because your power consumption is less than what you making this 3db rule i lot of company in brazil have this in their subs manuals, ( they recommended that so you can get most outta their equipment and be happy, you dont see amplifiers company doing this because it makes a lot of people think this amplifiers dont make power they are telling to use one with twice much power, you know im just letting you guys know how to setup and get the most outta the amplifiers and subs, because there is a lots facts that makes you amplifier make less power Ex: I got this store owner for more than 10 year on the market, he wanted to buy a 14k2e and install on a truck and i asked him about the electrical system for the amplifier this is his answer im gonna install two Powermaster D3100 which it gives 5000 watts each that should be enough to make 10000 watts This is the secret on the electrical system for your car always make more power than you need so you can keep it up nowadays with big amplifier its hard for you to keep it up with the power consumption on the big amplifier you neither need a lot of batteries or get a power supply if there is no power produce to keep up with the consumption of the amplifier first the current is gonna go down and efficiency too ( the amplifier will start to get hot) then the voltage and distortion will be produce and kill the coils on your subs !! This applies to any amplifier, this is physics im writing this out because a lot of people a asking this i hope this helps, im not much of a teacher i cant explain stuff well but here it is having any question just let me know