Leaderboard
-
Tirefryr
Super Moderators4Points30,516Posts -
Aaron Clinton
Admin2Points53,814Posts -
phillipathman
Members1Points37Posts -
Adrian_D
Super Moderators1Points17,871Posts
Popular Content
Showing content with the highest reputation on 09/27/2011 in Posts
-
2 points
-
2 pointsYeah, I wouldn't want my girl wearing that either. Obviously there's a problem if SHE has a pole piece.2 points
-
1 pointStefan, since you asked, here is a pic of what I've been working on for 2 afternoons. FI SE 15, 1800w amp, single battery up front, it does 146.0 dbdrag style. Very little tuning time so much more to gain there hopefully. With the box sealed up it peaks at 55hz and with the current tuning it peaks at 49-50. Goal is 147.5+, should beat the record in it's class, set by another car built by me1 point
-
1 pointJust thought the team captain of Team SKAR that runs SKAR would make more sense to have the topic in the SKAR section, that's all.1 point
-
1 pointAaron if you can figure out a breast cancer donation cause with those shirts not only will I buy some I will wear one and be your spokesman.1 point
-
1 point
-
1 pointLooks quite loud. Should this topic be moved to the build log or SKAR section now?1 point
-
1 pointWow, awesome, but if i could make a suggestion, i would make something to cover up the sealant job on the plexi Looks rad.1 point
-
1 pointWell idk abot the xcon but the SA-8 have a very good response and hit the lows like crazy I had 4 in 3.4^3 tuned to 34hz did 139.6 at 29hz with 800 watts 4 days after install1 point
-
-1 pointsMax dimensions should be no problem with seat out. Music taste rap , metal, rock. Hope this helps.-1 points
-
-1 pointsI have a box desighned for two 12 dcons could two12 skars work in same box? dcons not decons-1 points
-
-1 pointsSounds like you don't have good door speakers, and you need to get some new ones or have them amped at least. Decks should never be past 3/4 30+ is way too high.-1 points
-
-1 pointsSo much fail on this thread. OP - play with your settings, if it only happens at high volumes check your settings (high, low, mid). It could be as simple as that.-1 points
-
-1 pointsmy settings are as followed: treb -4 mid -5 bass +2 bass boost lvl 1 and dont have a low setting. i dont use an eq on ipods. it still shuts off with bass boost off and with bass on 0. i was told this hu could eliminate speaker bass (inside of car i think its called high pass crossover but i dont know for sure) but it turns out my bass is connected to the sub as well and i didnt know that at the time Knock down that bass some and turn up the gain accordingly.-1 points
-
-1 pointsLike you've had any piece of advice in this thread? All you've done is stated your deck doesn't get loud until 23, and "owned" Go troll elsewhere to get your post count up.-1 points
-
-1 pointsBecause if it turns off only on the "high" bass songs at high volumes it could mean on that "extra" bass it's clipping thus creating heat, and turning itself off... I know Kenwoods have heat problems.. How about you make a post helping the kid rather than trolling me on my reasoning.-1 points
