Leaderboard
-
shizzzon
SSA Regular1Points7,785Posts -
dem beats
SSA Regular1Points31,351Posts -
95Honda
SSA Tech Team1Points2,231Posts -
Notorious97200
SSA Regular1Points3,825Posts
Popular Content
Showing content with the highest reputation on 07/11/2013 in Posts
-
when it goes out, you need to look at your amp and see if the protection light is on or if the on light is on. I too believe loose wire or overheating at the amp. I see this amp has it's own thermal and low batt light. Need to see if one of those is on while it's cut out, not after the fact.1 point
-
1 pointDo you think those pwx give you enough midbass ? I don't know, I've never tested them. I've never tried to cross my sub over 80-100 Hz. You have 2 18"s, and you want them to blend very well with your front stage ? That seems hard to do, unless you turn down the gain on your bass amp, and have very loud midbass speakers. just my 2 cents.1 point
-
1 point2 identical drivers in seperate enclosures with different tuning may run into phase issues (especially around tuning) and actually reduce your desired output... You could model and compare phase to see...1 point
-
http://www.soundsolutionsaudio.com/forum/topic/58648-sundown-x-series-10121518-pre-order-eta-june-2013/ Baskets the same for X and Z4 series so cutout should be the same.1 point
-
1 point1 point1 point1 pointIt has 375% more wub wub? I don't know the sound you are referencing, but I am sure it has something to do with that. For instance, sound is at 1:24 2:46 is another.1 pointWelcome to the Jungle, we've got fun and games... look forward to seeing more of your products1 point1 point1 pointJust saw this http://www.soundsolutionsaudio.com/forum/topic/59838-who-we-are-and-what-we-offer/ which partially answers my questions.1 point1 point1 point0 pointsif you don't like looking like a dip shit.. i would suggest not saying things a dip shit would say... but i see you like to mark my comments negatively because you look like a fool..... if you don't know what your talking about.... shut the fuck up about it.... write that down.0 points-1 points-1 points-1 pointsThat'd be cool if they were made into a 12. Same with the SSA Evil. I might try an Evil if it was made into a 12.-1 points-1 points-1 points-1 pointsI don't want a SSA Evil. Fi is what i want....it'd just be nice if they poped up really fast.-1 points-1 pointsNever said you did lol I said I did since it's not made into a 12 either. Although it would be nice if both popped up!-1 points-1 points-1 points-1 points-1 pointsmy stereo pulls about 700~800 amps some where in that area i have a mechman 6 phase and it is beast, i have had a handfull of h/os and this is the best one yet..... its also themost expensive but ya get what ya pay for! a year and a half with no issue!-1 points-1 points-1 points-1 points-1 pointsHow many prototype woofers did you go through before finally selecting the one that is on pre-order now? Why was this version chosen over the others?-1 points-1 pointsWe can still recone them..but we just did a very short run of them for test marketing purposes of the sp4.-1 points-1 points2500 dodge ram with factory alt. i have been having major voltage drop issues with my Fi SP4 that i installed so i think its time to upgrade. i run 2 group 31 batteries 975CCA each, how many of these could i run off a single alt? how large of an alternator could i run in my truck and what will it cost? would i need to run more than one for my power demands? about 380A of sound system, a 5KW power inverter and a 450A winch.-1 points-1 points-2 pointsI have been wondering about my 12 inch BL subs the last few weeks. I got them re-coned about 6 months ago and I have the fully loaded BL's with 4 inch coils. I am wondering if the 4 inch coils were no longer available since last year what was used for my re-cones? SP4 coils? Nick can you chime in?-2 points-2 pointsyou could always customize your cone and tripple joint and coil with another 4in coil and make your own 12 using FI motor basket and cone just may have to find a well made 4in coil to take off and put it behind your 12 cone. as your own prototype? just a thought-2 points-2 pointsI do not want some random ass sub made of 15 different parts. I want something the wonderful engineers at FI have constructed, tested and approved.-2 points-2 pointsSo if I have SP4 coils in my subs will that make them perform different than standard BL's?-2 points-3 points
.jpg.ea8ac89a2ec7f49de0b9e4027c74f515.thumb.jpg.dc61d2e06476e189721027d6a6eb6027.jpg)
