Sorry, I have been leaking little bits here and there. It has been a very long (a year) process to get these off the ground. Because these buggers are NOT a basic overhung 1" or 1.5" coil, it took time to get parts and get the design right. Not to mention some changes at the factory that caused a number of delays.
Ok, so these are a copper coil, shorting ring, solid pole, phase plug, underhung design. In final testing, they are a very very clean, warm sound. They were right at home in an IB rig that Neal helped out on big time, so dropping into an average car door is excellent. The Evil6.5's have push terminals that are good for 10 gauge wire. Nomex spiders, so they will able take the same long term abuse that the SSA subs are known for. Also, the glass fiber cones that were available, performed a little better than the poly cones in testing.
I will probably be setting these at 120-150rms.
Specs are below, on the bottom right. Follow the green slope for the production model. I had put together a slightly different model to see what combination of aspects were the best performing for our goals, so ignore the purple slope and specs on the left.