j-roadtatts

We got a lot too, about 4-5 inches in all yesterday. Fucking Salt Lake. You got more than me thank god, it snows it melts, it snows, its fuckin' snowing right now. ITS just SOOO Fuckin' cold, and I am trying to go outside and build some pods.

Not sure. I don't buy front wheel drive cars and definitely not Hondas. Problem Solved. Thanks for the input.

I never thought of that, I will paste the thread next time. Thank god I have good spelling atleast.

I did the "turning the headlights on" and this infact confirms the load theory. I am HAPPY to know nothing is wrong with anything. If the ECU only drops the voltage to 12.5 when theres NO LOAD than I am GOOD, As the voltage NEVER drops when NEEDED!!!!!Problem solved.

Thanks for the info Ryan. I will definetly sign up over on the 6th gen forum and start reading. Thanks Jared

good call John, I will test this. Thanks Jared

What I am asking is if you have they same "noise" with a different amp other than the ZEDs? Is this in a car or a showroom/testbench?

do you have another amp you could test with?

You Da' man Bromo. Looks like time for the OP to read the manual.

Can I get some input on my alternator questions/problems? Thanks Guys. J-Roadtatts Honda Accord Build - SSA Car Audio Forum - Page 20

I think I understand why the alternator keeps shutting off. I think the ECM has a amplimeter in it that turns off the exciter wire when the ECM see's to many amps. I think the reason this occurs has more to do with the dual batterys. I think when I take the load away, the batterys have more amps than the ECM needs/wants and the failsafe in the ECM turns off the alternator. This is the reason both alternators had the same problem, as the car its self is telling them to shut off. This is ALL a GUESS, but here is my reasoning. I can reproduce the same effect EVERYDAY at the same place, These places are after I sit idling for a minute and then raise the RPM's without a stereo load. Without the stereo load I think the dual XS Power Batterys have more amps than the car needs/wants and the ECM turns off the Exciter/on wire to the alternator until the batterys level out with the amplimeters request. Like I said this is a guess, so I will call my Honda mechanic and run my thoughs by them. I know I can by-pass the ECM and have a key on wire excite the alternator, BUT don't know if this will start frying things in the cars electrical. Or figure out a way to LIMIT/isolate the amperage to the cars little 8ga wire that feed the ECM. Or maybe they can reprogram the ECM if I am lucky. PLEASE LET ME KNOW YOUR THOUGHT'S or if you think I am on the right track?

WTF??? It fuckin' snowed here last night, I am tired of this shit.

FUUUUCK, kind of, I guess. The bolt they sent was the wrong thread pitch and alittle short. I figured this out the hard way, I started the bolt and ripped about 1/4 inch of threads first.I was lucky I had my 77' ford truck to run to the hardware store with. I got a longer bolt with the right thread and a tap to clean up the threads because it was in the aluminum engine block, SO I only got one more chance. Well then everything went pretty smooth after that and everything fit correctly. also the belt they sent was the wrong one SO thank god the old one worked. I will get a new belt soon though. yeah mine was kind of difficult to get in, the belt didnt fit either on mine...also had to trim off some of the plastic casing around it....as for your alternator shutting off thats really odd, not sure what would be triggering that yeah the alternator fit like a glove other than the bolt and belt. I am baffled about the alt shutting off like the old one, that was half the reason for the HO. I just though the old one was overheating????? like I said I only pushed the new one for 15-20 minutes tops on the way here and the voltage still dropped to 12.5 when I got off the interstate???? Once I shut the car off and turn it back on the voltage goes back to 14.55. Who knows, I wouldn't even notice if I wasn't glued to the voltage meter.

FUUUUCK, kind of, I guess. The bolt they sent was the wrong thread pitch and alittle short. I figured this out the hard way, I started the bolt and ripped about 1/4 inch of threads first.I was lucky I had my 77' ford truck to run to the hardware store with. I got a longer bolt with the right thread and a tap to clean up the threads because it was in the aluminum engine block, SO I only got one more chance. Well then everything went pretty smooth after that and everything fit correctly. also the belt they sent was the wrong one SO thank god the old one worked. I will get a new belt soon though.

Well, I got to listen for about 20 minutes on the way to work, and voltage was good. The voltage is at 14.55 at idle and stays right there until a heavy load is applied. As far as testing I always use the same CDs I have used for 10+ years. The first test was Tool Undertow, I couldn't really get the voltage to budge. So on to some Too Short Cocktails, The voltage went balistic as usaul BUT NEVER DROPPED below 13.5. When Bumpin' the Too Short the voltage bounces like crazy between 15 and 13.5 but stays up there!!!!! the old alternator would of dropped to 12.5 instantly and struggled to hold that. The only thing I wonder about is after I remove the load and get off the interstate my voltage drops to 12.5 so basicly the alternator shuts off and I am seeing battery voltage????? My original alternator ALSO shut off in the same way when I removed the load and got off the interstate????? Does ANYONE have any ideas why this happens?????Why would the alternator shut off?????

Heres some pics of the DC Power alternator getting installed. I fuct up and erased the before pics, but still got everything else.

The Alternator is installed!!!!! I will be posting pics and my first impressions later today.

I hope for your sake that you atleast have something in your car now to listen too until you done planning?

I have to give you Mr. Tatts, I did a little cheapo method of lowering road noise for now until I get my mlv and ccf from Don. Earlier today I started using expanding plumbers foam for my rear wheel well areas, where I had gaps between the metal frames in the trunk. I went riding around after I did it, without letting cure (waited close to an hour or two) and it helped drastically with the noise. I still have a lot of noise left, I didnt expect it to completely get rid of the noise but it helped the situation until I can get the proper materials to kill the noise completely. Just wanted to say your are right in most cases, the road noise is coming from the rear wheel well especially in my vehicle. I also filled the spaces between the wheel wells and the quarter panel with the foam and between the box and wheel wells. I only did the LLP on the front side of the wheel well as my barrier. I will be spraying rubberized undercoating on the outside of the wheel well (at the source baby) and I will let you know the results.

I assumed thats what the car was. What processor are you running? 2 3sixty.2's Sweet! I can't wait to hear what you think of the 3sixty.2's. They look very capable, I would love the eq alone . I have a stupid question though, Does the center signal work with music too or just DVDs with 5.1? I see where your at, I just got back from Carlsbad. I took the kids to the caverns for spring break. WAAAAAY warmer down there. i like em. lol honestly the xrossover is what i end up messing with the most. im not sure if the center works with stereo music or not but hopefully the answer is yes I moved the right speaker to the center of the car temporarily and I Creamed myself. Made me want to build the right speaker into my center console and say f*ck everybody else in the car, haha. anyways thats what got me thinking about the center channal signal? I am VERY HAPPY with my H100 for my purposes, and I too play with x-over alot. I usaully end up with the eq pretty flat anyways.

The cuts lOok gOod enough for the girls I know, hehe. Like I always say " a little putty and paint will make a carpenter what he ain't". You stole that truck for $1600, the BFG's are worth half that.

Man, after having ONLY front speakers for a month now has been EPIC!!! Words can't describe how easy it is to tune the sound stage now. Talk about destuctive distortion, the guy that started putting rear speakers in sedans needs KICKED IN THE BALLS. anyways still waiting on the Aura's to show up in my mail box.

Lookin' good. I love the lime green!!!

What the hey? whens that blues website going to get updated? figured I ask since you got the ink in your sig.

I assumed thats what the car was. What processor are you running? 2 3sixty.2's Sweet! I can't wait to hear what you think of the 3sixty.2's. They look very capable, I would love the eq alone . I have a stupid question though, Does the center signal work with music too or just DVDs with 5.1? I see where your at, I just got back from Carlsbad. I took the kids to the caverns for spring break. WAAAAAY warmer down there.